window NISSAN CUBE 2014 3.G Quick Reference Guide

10
AUTOMATIC CLIMATE CONTROLS (if so equipped)
01 AUTO BUTTON

The automatic mode may be used year-round. Press the AUTO button and the system will



automatically control the inside temperature (automatic cooling and/or \
dehumidified




heating), air flow distribution and fan speed.
02 TE MPERATURE CONTROL BUTTONS
Press the temperature control buttons
02 up to increase the temperature or down



to decrease the temperature.
03 F AN SPEED CONTROL BUTTONS
Press the fan speed control buttons to manually adjust the fan speed fas\
ter or



slower .
Using the fan speed control buttons will dis able the auto mode; to resume auto mode,



press the
AUTO button

01.
04 MODE BUTTON
Press the
MODE button
to cycle through the following air flow outlets:



Air flows from the center and side vents.



Air flows from the center, side and foot vents.



Air flows mainly from the foot vents.



Air flows from the defroster and foot vents.
05 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
Press the defroster control button
to turn the system on. The A/ c automatically turns
on when the defroster mode is selected. T his feature removes humidity from the air.
Use the temperature control buttons 02 to set the desired temperature.
To set the defroster on high, press the fan speed control button to increase the fan



speed to the maximum setting.
01
05
10
04
0908
07
06
0302
first drive features
1523989_14_Cube_QRG_091613.indd 109/16/13 3:31 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

11
06 DEFROSTING REAR WINDOW
Push the rear window defroster switc
h
to turn the system on or off.
This function automatically turns off after approximately 15 minutes.
07 A/C B UTTON
Press the
A/C button to manually turn the A/ c on or off.
08 OUTSIDE AIR CIRCULATION BUTTON
Press the outside air circulation button to draw fresh air into the vehicle; the indicator
light on the button will illuminate.
Press and hold the outside air circulation button for more than 1.5 seconds to set
automatic outside air circulation mode.
09 AI R RECIRCULATION BUTTON
Press the air recirculation button to recirculate air inside the vehicle; the indicator

light on the button will illuminate. This system is used to avoid outside odors and to help
adjust the inside vehicle temperature more effectively.
The air recirculation mode cannot be activated when the climate control s\
ystem is in the front defroster mode
or the front defroster and foot outlet mode .
10 OFF B UTTON
Press the
OFF button to turn the climate control system off.
For more information, refer to the “Instruments and controls (section 2)” and the “Center display, heater, air conditioner,
audio and phone systems (section 4)” of your Owner’s Manual.
1523989_14_Cube_QRG_091613.indd 119/16/13 3:31 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

14
TRIP COMPUTER
With the ignition switch in the ON position, trip computer

01 modes can be selected by pressing the trip computer
mode switch 02 on the instrument panel.
The following modes can be selected in the display:
Trip A – measures the distance of one specific trip.
Trip B – measures the distance of a second specific trip.
current Fuel consumption – displays the current
fuel consumption.
Distance to Empty (dte) – displays the estimated distance to empty (dte) the vehicle can be driven before refueling.
Average Fuel c onsumption – displays the average fuel consumption since the last res\
et.
TRIP cOMPUTER RESET
To reset Trip A or Trip B, go to the desired mode on your trip computer and hold the trip
computer mode switch
02 for more than 3 seconds.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
02
system guide
BLUETOOTH® HANDS-FREE PHONE SYSTEM
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
Press the button to interrupt the voice prompts

at any time and speak a command after the tone.
The “Help” command can be used to hear a list of
available commands at any time.
Reduce bac kground noise as much as possible by
closing windows and pointing HVA
c
vents away
from the ceiling.
Speak naturally without long pauses and without
raising your voice.
When speaking Phonebook names, please be aware
some phones require the last name to be spoken
before the first name. For example, “Michael Smith”
may be spoken as “Smith Michael”.
To cancel a voice recognition session, simply wait 5 seconds,
say “ c ancel” or “Quit”, or press the
button for 5 seconds.
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
1523989_14_Cube_QRG_091613.indd 149/16/13 3:31 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.