odometer NISSAN JUKE 2014 F15 / 1.G Quick Reference Guide

*See your Owner’s Manual for information.VEHICLE INFORMATION DISPLAY*
HEADLIGHT AND TURN SIGNAL CONTROL
LOW TIRE PRESSURE WARNING LIGHT
INSTRUMENT BRIGHTNESS
CONTROL SWITCH*
TWIN TRIP ODOMETER RESET SWITCH* /
TRIP COMPUTER MODE SWITCH
WINDSHIELD WIPER AND WASHER SWITCH
STEERING WHEEL SWITCHES FOR
AUDIO* / BLUETOOTH
®
CRUISE CONTROL
OUTSIDE MIRROR CONTROL SWITCH
TILT STEERING ADJUSTMENT*
VEHICLE DYNAMIC CONTROL (VDC)
OFF SWITCH*
ALL-WHEEL DRIVE (AWD) SWITCH*
FUEL-FILLER DOOR RELEASE
HOOD RELEASE*
HAZARD WARNING FLASHER SWITCH*AUDIO AND NAVIGATION SYSTEM
INTEGRATED CONTROL SYSTEM
AUXILIARY JACK*
USB / iPOD
® CONNECTOR
POWER OUTLET*
0102030405
0910
16
06
11
17181920
07
1214
08
1315
02
03
0104
05
09
15
12
1617
18
19
20
13
14
11
1007
06
08

14To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
TRIP COMPUTER
With the ignition switch in the ON position, trip computer

01 modes can be selected by pressing the trip computer
mode switch 02 on the instrument panel. The following
modes can be selected in the display:

Trip A – measures the distance of one specifi c trip.

Trip B – measures the distance of a second specifi c trip.

Current Fuel Consumption – displays the current fuel consumption.

Distance to Empty (dte) – displays the estimated distance to empty (dte) the vehicle can
be driven before refueling.

Average Fuel Consumption – displays the average fuel consumption since\
the last reset.

Elapsed Time – displays the time since the last reset.

Torque Vectoring AWD (AWD model) – displays the current amount of torque distributed
to each wheel.
Push the reset switch
02 for approximately 1 second to reset the currently displayed trip
odometer to zero.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
BLUETOOTH® HANDS-FREE PHONE SYSTEM
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
Press the button to interrupt the voice prompts
at any time and speak a command after the tone.

The “Help” command can be used to hear a list of
available commands at any time.

Reduce background noise as much as possible
by closing windows and pointing HVAC vents away
from the ceiling.

Speak in a clear and natural voice without pausing
between words.

When speaking Phonebook names, please be aware
some phones require the last name to be spoken
before the fi rst name. For example, “Michael Smith”
may be spoken as “Smith Michael”.

To cancel a voice recognition session simply wait 5 seconds, say “Cancel” or “Quit”, or
press and hold the
button for 5 seconds.

To increase or decrease the volume of the voice prompts, push the volume \
control switches
+ or - on the steering wheel or turn the control dial on the audio syste\
m while the audio system
is responding.
02
01
SYSTEM GUIDE