brake light NISSAN JUKE 2015 F15 / 1.G User Guide


> (GLW   0RGHO )'@
passenger car.The vehicle isnot
designed forcornering atthe same
speeds asconventional passenger
cars. Failure tooperate thisvehicle
correctly couldresult inloss of
control and/orarollover accident.
. Always usetires ofthe same type,
size, brand, construction (bias,bias-
belted orradial) ,and tread pattern
on allfour wheels. Installtraction
devices onthe front wheels when
driving onslippery roadsanddrive
carefully.
. Besure tocheck thebrakes imme-
diately afterdriving inmud orwater.
See ªBrake systemº (P.5-35) forwet
brakes.
. Avoid parking yourvehicle onsteep
hills. Ifyou getout ofthe vehicle
and itrolls forward, backward or
sideways, youcould beinjured.
. Whenever youdrive off-road
through sand,mudorwater asdeep
as the wheel hub,more frequent
maintenance mayberequired. See
the maintenance informationinthe
ªNISSAN ServiceandMaintenance
Guideº . .
Spinning thefront wheels onslip-
pery surfaces maycause theAWD
warning lighttoflash andtheAWD
system toautomatically switchfrom
the AWD mode tothe 2WD mode.
This could reduce traction. Beespe-
cially careful whentowing atrailer
(AWD model) .
GUID-A A9BA26A-B 49B-43B0-A908-85126 20A8F65
WARNING
Do not operate thepush-button ignition
switch whiledriving thevehicle except
in an emergency. (Theengine willstop
when theignition switchispushed 3
consecutive timesorthe ignition switch
is pushed andheld formore than2
seconds.) Ifthe engine stopswhilethe
vehicle isbeing driven, thiscould lead
to acrash andserious injury.
Before operating thepush-button ignition
switch, besure tomove theshift lever tothe P
(Park) position (forContinuously Variable Trans-
mission models) orthe shift lever tothe N
(Neutral) position(formanual transmission
models) .
Starting anddriving
5-9
PUSH-BUT TON IGNITION SWITCH
&RQGLWLRQ


> (GLW   0RGHO )'@
5-10
Starting anddriving
SSD0436
OPERA TINGRANGE FORENGINE
ST ART FUNCTION
GUID-92477E FA-07C9-45 98-8D1A-D0B5C62E9 16C
The Intelligent Key can only beused forstarting
the engine whentheIntelligent Key iswithin the
specified operating range
*
1
.
When theIntelligent Key battery isalmost
discharged orstrong radiowaves arepresent
near theoperating location,theIntelligent Key
system's operating rangebecomes narrower
and may notfunction properly.
If the Intelligent Key iswithin theoperating
range, itis possible foranyone, evensomeone
who does notcarry theIntelligent Key ,to push
the ignition switchtostart theengine. .
The cargo roomareaisnot included inthe
operating rangebuttheIntelligent Key may
function.
. Ifthe Intelligent Key isplaced onthe
instrument panel,insidetheglove boxor
door pocket, theIntelligent Key may not
function.
. Ifthe Intelligent Key isplaced nearthedoor
or window outsidethevehicle, theIntelligent
K ey may function.
SSD0859
PUSH-BUTT ONIGNITION SWITCH
OPERA TION
GUID-BF4C8 6CC-570F-4B04-92EF-AF63D44EB0BB
When theignition switchispushed without
depressing thebrake pedal(Continuously Vari-
able Transmission models)orthe clutch pedal
(manual transmission models),the ignition
switch position willchange asfollows:
. Push oncetochange toACC.
. Push twotimes tochange toON.
. Push three times tochange toOFF .
. Push fourtimes toreturn toACC.
. Open orclose anydoor toreturn toLOCK
during theOFF position.
The indicator light
*
A
on the ignition switch
&RQGLWLRQ


> (GLW   0RGHO )'@
illuminates whentheignition switchisin the
ACC orON position.
Some indicators andwarnings foroperation are
displayed onthe meter. (SeeªWarning/indicator
lights andaudible remindersº (P.2-12) .)
Continuousl yVariable Transmiss ion
models
GUID-6E32 8D8C-24AA-4AAE-B272 -4174A32518BF
The ignition lockisdesigned sothat theignition
switch position cannotbeswitched toLOCK
until theshift lever ismoved tothe P(Park)
position.
When theignition switchcannot bepushed
toward theLOCK position, proceedasfollows:
1. Move theshift lever intotheP(Park)
position.
2. Push theignition switchtothe OFF position.
3. Open thedoor. Theignition switchwill
change tothe LOCK position.
The shift lever canbemoved fromtheP
(Park) position ifthe ignition switchisin
the ONposition andthebrake pedalis
depressed.
PUSH-BUTT ONIGNITION SWITCH
POSITIONS
GUID-974 D7B79-BE D6-4F09-AB 6E-A579BED C09E3
L OCK (Normal parkingposition)
GUID-5A2EA0 6F-E703-4A2F-9560-6 6F1270752A 7
The ignition switchcanonly belocked inthis
position.
The ignition switchwillbeunlocked whenitis
pushed tothe ACC position whilecarrying the
Intelligent Key .
ACC (Accessorie s)
GUID-F5 678EC4-E8AB -4C49-8E37-0CBBB1B55191
This position activates electrical accessories
such asthe radio, whentheengine isnot
running.
ON (Normal operating position)
GUID-D96 98FD3-051D -4467-807E-FFC14A49 3CA4
This position turnsonthe ignition systemand
electrical accessories.
OFF
GUID-A837 21F2-C4C7 -4D9A-826D-F 29009E67A40
The engine canbeturned offinthis position.
Continuously Variable Transmission models:The
ignition lockisdesigned sothat theignition
switch cannot beswitched tothe LOCK position
until theshift lever ismoved tothe P(Park)
position.
CAUTION
Do not leave thevehicle withthepush-
button ignition switchinACC orON
position whentheengine isnot running
for anextended period.Thiscandis-
charge thebattery.
EMERGENC YENGINE SHUTOFF
GUID-CB B805D6-14E9 -451C-B7A9-7F58A6D E7098
T o shut offthe engine inan emergency situation
while driving, perform thefollowing procedure:
. Rapidly pushthepush-button ignitionswitch
3 consecutive timesinless than 1.5
seconds, or
. Push andhold thepush-button ignition
switch formore than2seconds.
Starting anddriving
5-11
&RQGLWLRQ


> (GLW   0RGHO )'@
5-12
Starting anddriving
SSD0860
INTELLIGEN TKEY BATTER YDIS-
CHARGE
GUID-B0D19 56A-5575-42 6F-A28A-6ED 797C76123
If the battery ofthe Intelligent Key isdischarged,
or environmental conditionsinterferewiththe
Intelligent Key operation, starttheengine
according tothe following procedure:
1. Move theshift lever tothe P(Park) position
(for Continuously Variable Transmission
models) orthe shift lever tothe N(Neutral)
position (formanual transmission models).
2. Firmly applythefoot brake.
3. Touch theignition switchwiththeIntelligent
K ey as illustrated. (Achime willsound.) 4.
Push theignition switchwhiledepressing
the brake pedalwithin 10seconds afterthe
chime sounds. Theengine willstart.
After step3is performed, whentheignition
switch ispushed withoutdepressing thebrake
pedal, theignition switchposition willchange to
ACC.
NO TE:
. When theignition switchispushed to
the ACC orON position orthe engine is
started bythe above procedures, the
Intelligent Keysystem warning light
may blink inyellow evenifthe Intelli-
gent Keyisinside thevehicle. Thisis
not amalfunction. To stop thewarning
light from blinking, touchtheignition
switch withtheIntelligent Keyagain.
. Ifthe Intelligent Keysystem warning
light inthe meter isblinking ingreen,
replace thebattery assoon aspossible.
(See ªIntelligent Keybattery replace-
mentº (P.8-23) .)
GUID-99D A8E7B-99CA -40D0-B1AA-E 547E7042524
. Make surethearea around thevehicle is
clear.
. Check fluidlevels suchasengine oil,cool-
ant, brake fluid,andwindow washerfluidas
frequently aspossible, oratleast whenever
you refuel.
. Check thatallwindows andlights areclean.
. Visually inspecttiresfortheir appearance
and condition. Alsocheck tiresforproper
inflation.
. Lock alldoors.
. Position seatandadjust headrestraints.
. Adjust insideandoutside mirrors.
. Fasten seatbelts andaskallpassengers to
do likewise.
. Check theoperation ofwarning lightswhen
the ignition switchisplaced inthe ON
position. (SeeªWarning/indicator lightsand
audible remindersº (P.2-12) .)
BEFORE STARTING THEENGINE
&RQGLWLRQ


> (GLW   0RGHO )'@
5-18
Starting anddriving
back tothe ONposition. Thevehicle
should returntoits normal operating
condition. Ifitdoes notreturn toits normal
operating condition, haveaNISSAN dealer
check thetransmission andrepair ifne-
cessary.
WARNING
When thehigh fluid temperature pro-
tection modeorfail-safe operation
occurs, vehiclespeedmaybegradually
reduced. Thereduced speedmaybe
lower thanother traffic,which could
increase thechance ofacollision. Be
especially carefulwhendriving. Ifne-
cessary, pulltothe side ofthe road ata
safe place andallow thetransmission
to return tonormal operation, orhave it
repaired if
necessary.
SSD1142
Shift lockrelease
GUID-39E4 740A-3513-44A0-A3 06-744DB1802606
If the battery charge islow ordischarged, the
shift lever maynotbemoved fromtheP(Park)
position evenwiththebrake pedal depressed
and theshift lever button pushed.
T o move theshift lever, perform thefollowing
procedure:
1. Place theignition switchinthe OFF or
L OCK position.
2. Apply theparking brake.
3. Remove theshift lockrelease cover
*
A
using asuitable tool. 4.
Push down theshift lockrelease usinga
suitable tool.
5. Push theshift lever button andmove the
shift lever tothe N(Neutral) positionwhile
holding downtheshift lockrelease.
Place theignition switchinthe ON position. The
vehicle maybemoved tothe desired location.
Replace theremoved shiftlockrelease cover
after theoperation.
If the battery isdischarged completely,the
steering wheelcannot beunlocked. Donot
move thevehicle withthesteering wheellocked.
If the shift lever cannot bemoved outofthe P
(Park) position, haveaNISSAN dealercheckthe
CVT system assoon aspossible.
WARNING
If the shift lever cannot bemoved from
the P(Park) position whiletheengine is
running andthebrake pedalisde-
pressed, thestop lights maynotwork.
Malfunctioning stoplights couldcause
an accident injuringyourself and
others.
&RQGLWLRQ


> (GLW   0RGHO )'@
MANUAL TRANSMISSIO N(MT)
GUID-578 CD4B7-85A6 -49CB-AB4F-F226DA21 98CA
WARNING
. Do not downshift abruptlyonslip-
pery roads. Thismay cause aloss of
control.
. Do not over-rev theengine when
shifting toalower gear.Thismay
cause aloss ofcontrol orengine
damage.
. When thehigh fluid temperature
protection modeorfail-safe opera-
tion occurs, vehiclespeedmaybe
gradually reduced.Thereduced
speed maybelower thanother
traffic ,which couldincrease the
chance ofacollision. Beespecially
careful whendriving. Ifnecessary,
pull tothe side ofthe road atasafe
place andallow thetransmission to
return tonormal operation, orhave
it repaired ifnecessary.
CAUTION
. Do not rest your footonthe clutch
pedal whiledriving. Thismay da-
mage theclutch.
. Fully depress theclutch pedalbe-
fore shifting tohelp prevent trans-
mission damage.
. Stop yourvehicle completely before
shifting intoR(Reverse) .
. When thevehicle isstopped fora
period oftime, forexample atastop
light, shifttoN(Neutral) andrelease
the clutch pedalwiththefoot brake
applied.
SSD0552
Shifting
GUID-9FDDD F2D-B4D7-4E6E-B1E 7-9D36A148 D03F
T o change gears,orwhen upshifting ordown-
shifting, fullydepress theclutch pedal, shiftinto
the appropriate gear,thenslowly andsmoothly
release theclutch pedal.
T o ensure smooth gearchanges, besure tofully
depress theclutch pedalbefore operating the
shift lever. Ifthe clutch pedalisnot fully
depressed beforethetransmission isshifted, a
gear noise maybeheard. Transmission damage
could occur.
Start thevehicle in1st gear andshift to2nd,
3rd, 4th,5thand 6thgear insequence accord-
ing tovehicle speed.
Starting anddriving
5-19
&RQGLWLRQ


> (GLW   0RGHO )'@
screen.
GUID-31E C2358-F7E 9-4615-836 7-3344BACF 4D60
WARNING
. Be sure theparking brakeisfully
released beforedriving. Failureto
do socan cause brakefailure and
lead toan accident.
. Do not release theparking brake
from outside thevehicle.
. Donot use theshift lever inplace of
the parking brake.Whenparking, be
sure theparking brakeisfully
engaged.
. Donot leave children unattended in
a vehicle. Theycould release the
parking brakeandcause anacci-
dent.
SP A2110
T o apply: Pulltheparking brakeleverup
*
1
.
T o release:
1. Firmly applythefoot brake.
2. While pulling uponthe parking brakelever
slightly ,push thebutton
*
2
and lower the
lever completely
*
3
.
3. Before driving, besure thebrake warning
light goes out.
Starting anddriving
5-25
P ARKING BRAKE
&RQGLWLRQ


> (GLW   0RGHO )'@
accelerator pedal.Your vehicle willmaintain the
set speed.
. To pass another vehicle,depressthe
accelerator pedal.Whenyourelease the
pedal, thevehicle willreturn tothe previously
set speed.
. The vehicle maynotmaintain thesetspeed
on winding orhilly roads. Ifthis happens,
drive without thecruise control.
T o cancel thepreset speed, useone ofthe
following methods:
a) PushtheCANCEL switch.
b) Tap the brake pedal.
c) Turn theMAIN switch off.The CRUISE indicator
light willturn off.
. Ifyou depress thebrake pedalwhilepushing
the ACCEL/RES orCOAST/SET switchand
reset atthe cruising speed,thecruise
control willdisengage. Turn theMAIN switch
off once andthen turniton again.
. The cruise control willautomatically cancelif
the vehicle slowsmorethan8MPH (13
km/h) below thesetspeed.
. Ifyou move theshift lever tothe N(Neutral)
position (Continuously Variable Transmis-
sion models) ordepressing theclutch pedal
(Manual Transmission models),the cruise
control willbecanceled. T
o reset atafaster cruising speed,useone
of the following methods:
. Depress theaccelerator pedal.Whenthe
vehicle attainsthedesired speed,pushand
release theCOAST/SET switch.
. Push andhold theACCEL/RES switch.
When thevehicle attainsthedesired speed,
release theswitch.
. Push, thenquickly release theACCEL/RES
switch. Eachtimeyoudothis, thesetspeed
will increase byabout 1MPH (1.6km/h) .
T o reset ataslower cruising speed,useone
of the following methods:
. Lightly tapthebrake pedal. Whenthe
vehicle attainsthedesired speed,pushthe
COAST/SET switchandrelease it.
. Push andhold theCOAST/SET switch.
Release theswitch whenthevehicle slows
down tothe desired speed.
. Push, thenquickly release theCOAST/SET
switch. Eachtimeyoudothis, thesetspeed
will decrease byabout 1MPH (1.6km/h) .
T o resume thepreset speed, pushand
release theACCEL/RES switch.Thevehicle
will resume thelast setcruising speedwhenthe
vehicle speedisover 25MPH (40km/h) .
GUID-EC2F D794-8914-4CC0-A38E-2BDC09 CE9FF5
CAUTION
During thefirst 1,200 miles (2,000 km),
follow theserecommendations toob-
tain maximum engineperformance and
ensure thefuture reliability andecono-
my ofyour newvehicle. Failureto
follow theserecommendations may
result inshortened enginelifeand
reduced engineperformance.
. Avoid driving forlong periods atconstant
speed, eitherfastorslow .Do not run the
engine over4,000 rpm.
. Donot accelerate atfull throttle inany gear.
. Avoid quickstarts.
. Avoid hardbraking asmuch aspossible.
Starting anddriving
5-27
BREAK-IN SCHEDULE
&RQGLWLRQ


> (GLW   0RGHO )'@
5-28
Starting anddriving
GUID-7C03 A534-EF0E- 40B7-84F0-1 3B8CB4EE473
Follow theseeasy-to-use FuelEfficient Driving
Tips tohelp youachieve themost fueleconomy
from yourvehicle.
1. Use smooth accelerator andbrake pedal
application.
.
Avoid rapidstarts andstops.
.
Use smooth, gentleaccelerator and
brake application wheneverpossible.
.
Maintain constant speedwhilecommut-
ing and coast whenever possible.
2. Maintain constant speed.
.
Look ahead totry and anticipate and
minimize stops.
.
Synchronizing yourspeed withtraffic
lights allows youtoreduce yournumber
of stops.
.
Maintaining asteady speedcanminimize
red light stops andimprove fueleffi-
ciency .
3. Use airconditioning (A/C)athigher vehicle
speeds.
.
Below 40MPH (64km/h) ,it is more
efficient toopen windows tocool the
vehicle duetoreduced engineload.
.
Above 40MPH (64km/h) ,it is more
efficient touse A/C tocool thevehicle
due toincreased aerodynamic drag.
.
Recirculating thecool airinthe cabin
when theA/C ison reduces coolingload.
4. Drive ateconomical speedsanddistances.
.
Observing thespeed limitandnotex-
ceeding 60MPH (97km/h) (where
legally allowed) canimprove fueleffi-
ciency duetoreduced aerodynamic
drag.
.
Maintaining asafe following distance
behind othervehicles reduces unneces-
sary braking.
.
Safely monitoring traffictoanticipate
changes inspeed permits reduced brak-
ing and smooth acceleration changes.
.
Select agear range suitable toroad
conditions.
5. Use cruise control.
.
Using cruise control duringhighway
driving helpsmaintain asteady speed.
.
Cruise control isparticularly effectivein
providing fuelsavings whendriving on
flat terrains.
6. Plan forthe shortest route.
.
Utilize amap ornavigation systemto
determine thebest route tosave time.
7. Avoid idling.
.
Shutting offyour engine whensafefor
stops exceeding 30-60seconds saves fuel
and reduces emissions.
8. Buy anautomated passfortoll roads.
.
Automated passespermitdrivers touse
special lanestomaintain cruisingspeed
through thetolland avoid stopping and
starting.
9. Winter warmup.
.
Limit idling timetominimize impacttofuel
economy .
.
V ehicles typically neednomore than30
seconds ofidling atstart-up toeffectively
circulate theengine oilbefore driving.
.
Y our vehicle willreach itsideal operating
temperature morequickly whiledriving
versus idling.
10. Keeping yourvehicle cool.
.
Park yourvehicle inacovered parking
area orinthe shade whenever possible.
.
When entering ahot vehicle, opening the
windows willhelp toreduce theinside
temperature faster,resulting inreduced
demand onyour A/Csystem.
FUEL EFFICIENT DRIVINGTIPS
&RQGLWLRQ


> (GLW   0RGHO )'@
A WD shift tips
GUID-C35 72DD7-028 5-47BA-B5AE -F412F28BC6E1
. Ifthe AWD mode switch isoperated while
making aturn, accelerating ordecelerating,
or ifthe ignition switchisturned offwhile in
the AWD-V orAWD mode, youmay feela
jolt. This isnormal.
. The oiltemperature ofpower trainparts will
increase ifthe vehicle iscontinuously
operated underconditions wherethediffer-
ence inrotation between thefront andrear
wheels islarge (wheel slip),such aswhen
driving thevehicle onrough roadsthrough
sand ormud orwhen freeing astuck vehicle.
In these cases, theAWD warning lightblinks
rapidly andtheAWD mode changes tothe
2WD mode toprotect thepower trainparts.
If you stop driving withtheengine idlingand
wait until thewarning lightstops blinking,
the AWD returns tothe AWD-V orAWD
mode.
. Brake distance inthe AWD mode isthe
same as2WD.
CAUTION
. Do not start theengine withthe
AWD mode switch inany mode in
the following cases: Ð
when thevehicle isplaced ona
free-roller orjacking upthe
vehicle withthefront tires
raised andtherear tires onthe
ground.
Ð when towing thevehicle withthe
rear tires raised fromthe
ground.
. Operate theAWD mode switch only
when driving straight. Donot oper-
ate the AWD mode switch when
making aturn orbacking up.
. Do not operate theAWD mode
switch withthefront wheel spin-
ning.
. Engine idlingspeed ishigh while
warming upthe engine. Beespe-
cially careful whenstarting ordriv-
ing onslippery surfaces withthe
AWD mode switch setinthe AWD-V
or AWD mode.
SSD0336-D
A WD WARNING LIGHT
GUID-00 AD0D7B-4E5 0-437F-8A9D-C89C8757 711F
The AWD warning lightlocated inthe instrument
panel illuminates whentheignition switchis
placed inthe ON position. Itturns offsoon after
the engine isstarted.
If any malfunction occursinthe AWD system
while theengine isrunning, orwhile driving, the
Starting anddriving
5-31
&RQGLWLRQ