ecu NISSAN PATROL 1998 Y61 / 5.G Electrical System Workshop Manual

NISSAN PATROL 1998 Y61 / 5.G Electrical System Workshop Manual PATROL 1998 Y61 / 5.G NISSAN NISSAN https://www.carmanualsonline.info/img/5/616/w960_616-0.png NISSAN PATROL 1998 Y61 / 5.G Electrical System Workshop Manual

Page 53 of 326

NISSAN PATROL 1998 Y61 / 5.G Electrical System Workshop Manual YOKE CHECK
Magnet is secured to yoke by bonding agent. Check magnet to see
that it is secured to yoke and for any cracks. Replace malfunction-
ing parts as an assembly.
CAUTION:
Do not clamp yoke in a

Page 62 of 326

NISSAN PATROL 1998 Y61 / 5.G Electrical System Workshop Manual Replacement
For removal and installation of spiral cable, refer to RS section
[``Installation Ð Air Bag Module and Spiral Cable, ``SUPPLE-
MENTAL RESTRAINT SYSTEM (SRS)].
+Each switch can be repl

Page 113 of 326

NISSAN PATROL 1998 Y61 / 5.G Electrical System Workshop Manual Flexible Print Circuit (FPC)
Tachometer, fuel gauge and water temperature gauge are con-
nected with uni®ed meter control unit (speedometer) by Flexible
Print Circuit (FPC) connector. When replace or

Page 114 of 326

NISSAN PATROL 1998 Y61 / 5.G Electrical System Workshop Manual Trouble Diagnoses
PRELIMINARY CHECK
CHECK-IN
Can Diagnosis mode
be activated? Refer to
``Meter/Gauge Opera-
tion and Odo/Trip Meter
Segment Check in
Diagnosis Mode,
EL-108.
Ye s
cNo
Do meter warning

Page 148 of 326

NISSAN PATROL 1998 Y61 / 5.G Electrical System Workshop Manual Removal
1. Remove 4 bolts that secure wiper motor.
2. Detach wiper motor from wiper linkage at ball joint.
3. Remove wiper linkage.
Be careful not to break ball joint rubber boot.
Installation
+Grease

Page 158 of 326

NISSAN PATROL 1998 Y61 / 5.G Electrical System Workshop Manual Electrical Components Inspection
HEADLAMP WIPER MOTOR CHECK
When wiper motor is locked, a protective circuit built into
wiper motor activates to stop wiper motor. If wiper motor will
not restart even

Page 178 of 326

NISSAN PATROL 1998 Y61 / 5.G Electrical System Workshop Manual NATS Audio Link/LHD
DESCRIPTION
The link with the NATS IMMU implies that the radio can basically only be operated if connected to the match-
ing NATS IMMU to which the radio was initially ®tted on th

Page 179 of 326

NISSAN PATROL 1998 Y61 / 5.G Electrical System Workshop Manual Item Service procedure Description
Replacement of IMMU by old
partRadio needs to be reset to NEW state by autho-
rized representative of radio manufacturer.If a radio code has already been stored in
m

Page 244 of 326

NISSAN PATROL 1998 Y61 / 5.G Electrical System Workshop Manual System Description
NATS has the following immobiliser functions:
+Since only NATS ignition keys, whose ID nos. have been registered into the ECM and IMMU of NATS,
allow the engine to run, operation of

Page 247 of 326

NISSAN PATROL 1998 Y61 / 5.G Electrical System Workshop Manual CONSULT DIAGNOSTIC TEST MODE FUNCTION
CONSULT DIAGNOSTIC TEST
MODEDescription
C/U INITIALIZATION When replacing any of the following three components, C/U initialization is necessary.
[NATS ignition k
Page:   1-10 11-20 next >