instrument panel NISSAN X-TRAIL 2013 Owner´s Manual


> (GLW    0RGHO 7$@
2-40
Instrument sand controls
position
T32A1308 27-7DA4961D-ADB9-4 8C2-AF3E-CB8FF4FAA66E
The
position turnsonthe headlights inaddition to
the other lights.
AUT Oposition (ifequipped)
T32A1308 27-42005CFF -F09D-4D2E-B51A-E A900BA8AB9 5
When theignition switchisin the ªONº position and
the headlight switchisin the ªAUT Oºposition, the
headlights, frontclearance lights,instrument panel
lights, rearcombination lightsandother lights turnon
automatically dependingonthe brightness ofthe
surroundings.
The headlights willturn onautomatically attwilight orin
rainy weather (whenthewindshield wiperisoperated
continuously) .
When theignition switchisplaced inthe ªLOCKº or
ªOFFº position, thelights willturn offautomatically
.
JVI0510X
CAUTION:
Do not place anyobjects ontop ofthe sensor
*
A
. The sensor senses thebrightness leveland
controls theautolight function.Ifthe sensor is
covered, itreacts asifitis dark, andthe
headlights willilluminate.
Headlight beam
T32A130 827-9CEFEA 7E-F212-4D2D -A4BD-2DF 2318D931E
JVI0856X
T ype A
JVI0994X
T ype B
T o turn onthe high beam, pushthelever towards the
front position
*
1
.
T o turn offthe high beam, returnthelever tothe neutral
position
*
2
.
T o flash theheadlights, pullthelever towards the
rearmost position
*
3
. The headlights canbeflashed
even when theheadlights arenot on.
If equipped, whenthelever ispulled towards the
rearmost position
*
3
after theignition switchis
placed inthe ªOFFº orªLOCKº position, theheadlight
will turn onand stay onfor 30 seconds. Thelever can be
pulled 4times forupto2minutes.
High beam assist (ifequipped)
GUID-A9E4 4EB1-B8C0 -468F-A5B4 -1A9C35090997
The high beam assist system willoperate whenthe
vehicle isdriven atspeeds ofapproximately 40km/h
(25 MPH) andabove. Ifan oncoming vehicleorleading
vehicle appears infront ofyour vehicle whenthe
headlight highbeam ison, the headlight willbe
switched tothe low beam automatically .
Precautions onhigh beam assist:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
WARNING:
. The high beam assist system isaconve-
nience butitis not asubstitute forsafe
driving operation. Thedriver should remain
alert atall times, ensure safedriving prac-
tices andswitch thehigh beam andlow
beam manually whennecessary.
. The high beam orlow beam maynotswitch
automatically underthefollowing condi-
tions. Switch thehigh beam andlowbeam
manually.
Ð During badweather (rain,fog,snow,
wind, etc.).
Ð When alight source similar toahead-
light ortail light isin the vicinity ofthe
vehicle.
Ð When theheadlights ofthe oncoming
vehicle orthe leading vehicleareturned
off, when thecolor ofthe light is
affected duetoforeign materials on
the lights, orwhen thelight beam is
out ofposition.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
If sunroof doesnotoperate
T32A1308 27-574BB11 4-4461-4515-9FA9-BE01 BF521E86
If the sunroof andsunshade donot operate properly,
perform thefollowing procedure toinitialize the
operation system.
1. Ifthe sunroof andsunshade areopen, closethem
fully byrepeatedly pushingthesunroof switchto
the CLOSE
*
2
position.
2. Push andhold thesunroof switchtothe CLOSE
*
2
position for10 seconds.
3. After thesunroof andsunshade moveslightly to
the closed position andthen move backalittle,
release thesunroof switch.
4. Push andhold thesunroof switchtothe CLOSE
*
2
position forover 6seconds.
5. Release thesunroof switch.Thesunroof and
sunshade willfully open andthen fullyclose.
6. Check ifthe sunroof switchoperates normally.
If the sunroof doesnotoperate properly afterperform-
ing the procedure above,haveyourvehicle checked by
a NISSAN dealer.
T32A1308 27-F2AA6C F4-E731-425F-BB87-8 8912AD965 5F
JVI0878X
Instrument panel(if equipped)
JVI0880X
Console box
JVI0879X
Cargo area
T o use thepower outlet,pullthecover asillustrated.
CAUTION:
. The outlet andplug maybehot during or
immediately afteruse.
. This power outletisnot designed foruse
with acigarette lighterunit.
. Donot use with accessories thatexceed a12
volt, 120W (10A)power draw.Donot use
double adapters ormore thanoneelectrical
accessory.
. Use thispower outletwiththeengine
running toavoid discharging thevehicle
battery.
. Avoid usingwhentheairconditioner, head-
lights orrear window defogger ison.
. Push theplug inas far asitwill go.Ifgood
contact isnot made, theplug mayoverheat
or the internal temperature fusemayblow.
. Before inserting ordisconnecting aplug, be
sure thattheelectrical accessory beingused
is turned OFF.
. When notinuse, besure toclose thecap. Do
not allow water orany liquid tocontact the
outlet.
Instrume ntsand controls
2-53
POWER
OUTLETS
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-6
Pre-d riving checks andadjustments
T ype B(for models withSuper LockSystem)
GUID-F C33802A-5DE C-4085-A071-5D16F972 BE27
SP A2791
T o unlock andopen thedoor, pulltheinside door
handle asillustrated.
The doors cannot beopened byusing theinside door
handle whentheSuper LockSystem isactivated.
L OCKING WITHPOWER DOORLOCK
SWIT CH
T32A130 827-3B65C 9EF-9366-489 8-8216-0C38354CFC4 9
SP A2803
Driver's armrest
SP A2804
Passenger's armrest(ifequipped)
Operating thepower doorlockswitch (located onthe
driver's andfront passenger's doors-if equipped) will
lock orunlock allthe doors.
T o lock thedoors, pushthepower doorlockswitch to
the lock position
*
1
.
T o lock thedoors, pushthepower doorlockswitch to
the lock position
*
1
with thedriver's dooropen, then
close thedoor while pulling thedoor handle. Alldoors
will lock (except forSouth AfricaandEurope) .
CAUTION:
. When locking thedoors usingthepower
door lockswitch, besure nottoleave the
key inthe vehicle.
. When theIntelligent Keyisleft inthe
vehicle, andyoutrytolock thedoor using
the power doorlockswitch aftergetting out
of the vehicle, allthe doors willunlock
automatically afterthedoor isclosed.
T o unlock, pushthepower doorlockswitch tothe
unlock position
*
2
.
With theignition switchinthe ªONº position, thedoor
lock indicator
light
(located onthe instrument panel)
(ifequipped) willilluminate andstay on.With
the ignition switchinthe ªOFFº orªLOCKº position,
the door lockindicator light
will illuminate for30
minutes.
VEHICLE SPEEDSENSING DOORLOCK
MECHANISM (ifequipped)
GUID-3B C1108A-9 9CD-4FE1-B C73-37F44321FBD5
All doors willbelocked automatically whenthevehicle
speed reaches 10km/h (6MPH) .Once thelock has
been unlocked, whiledriving, thevehicle speed
sensing doorlockmechanism willnot lock thedoor
again unless oneofthe following isperformed.
. Opening anydoors.
. Placing theignition switchinthe ªLOCKº position.
T o activate vehiclespeedsensing doorlock
mechanism
GUID-D62 5B83C-E9E 9-4D7D-B0C4-36022D5 FFD83
1. Place theignition switchinthe ªONº position.
2. Within 20seconds, pushandhold thepower door
lock switch tothe ªLOCKº position for5seconds.
3. Abuzzer willsound ifactivation wassuccessful.
T o deactivate:
1. Place theignition switchinthe ªONº position.
2. Within 20seconds, pushandhold thepower door
lock switch tothe ªUNL OCKº position for5
seconds.
3. Abuzzer willsound ifdeactivation wassuccessful.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-8
Pre-d riving checks andadjustments
controller fromthevehicle. Thismayprevent the
unauthorized useofthe remote controller tounlock
the vehicle. Forinformation regardingtheerasing
procedure, contactaNISSAN dealer.
For information regardingthereplacement ofabattery ,
see ªBatteryº (P.8-20) .
USING REMOTEKEYLESS ENTRYSYSTEM
GUID-7F 0F3356-B9 C6-45AC-82 87-8F7116B BEC60
JVP0278X
T ype A(without panicalarm)
*
1
Jackknife typekeyrelease button
*
2
L OCK button
*
3
UNL OCK button
*
4
Battery indicator light
JVP0308X
T ype B(with panic alarm)
*
1
Jackknife typekeyrelease button
*
2
L OCK button
*
3
UNL OCK button
*
4
P ANIC button
*
5
Battery indicator light
Locking doors
GUID-6E92 86B0-733D-456C-B91 3-B3ED645790BA
1. Remove theignition key.
2. Close alldoors.
3. Push theªLOCKº
button
*
2
on the remote
controller.
4. Alldoors willbelocked. Thedoor lockindicator
light
(located onthe instrument panel)will
illuminate for1minutes (ifequipped) .
5. Operate doorhandles toconfirm thatthedoors
have been securely locked.
CAUTION:
After locking thedoors usingtheremote con-
troller, besure thatthedoors havebeen securely
locked byoperating thedoor handles.
Unlocking doors
GUID-9E 7A3723-4E10 -44F6-B3CE-C31959B FBFBE
1. Push theªUNL OCKº
button
*
3
on the
remote controller.
2. Alldoors willbeunlocked.
All doors willbelocked automatically unlessoneofthe
following operations isperformed within30seconds or
1 minute afterpushing theªUNL OCKº
button
*
3
.
. Opening anydoors.
. Inserting thekey into theignition switch.
Selective doorunlock mode(ifequipped) (Type
A) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push theªUNL OCKº
button
*
3
on the
remote controller.
2. The driver's doorunlock.
3. Push theªUNL OCKº
button
*
3
on the
remote controller again.
4. Alldoors willbeunlocked.
Selective doorunlock mode(ifequipped) (Type
B) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When youfirst receive thevehicle, thedoor unlock
mode isset tounlock allthe doors withonepush ofthe
ªUNL OCKº
button
*
3
. The door unlock mode
can beswitched tothe selective doorunlock mode,
which unlocks thepassenger's doorsatthe second
push ofthe ªUNL OCKº
button
*
3
.
Selective doorunlock mode:
1. Push theªUNL OCKº
button
*
3
on the
remote controller.
2. The driver's doorunlock.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-14
Pre-driving checksandadjustments
. Donot pull thedoor handle beforepushing the
door handle request switch.Thedoor willbe
unlocked butwillnotopen. Release thedoor
handle onceandpullitagain toopen the
door.
SP A2710
SP A2545
When youcarry theIntelligent Key with you,youcan
lock orunlock alldoors bypushing thedoor handle
request switch(driver's orfront passenger's)
*
A
or
back doorrequest switch
*
B
within therange of
operation.
When youlock orunlock thedoors oropen theback
door, thehazard indicator willflash andtheoutside
chime willsound (ifequipped) asaconfirmation. For
details, seeªHazard indicator andhorn operationº (P
.3-18) .
W elcome lightandfarewell lightfunction (if
equipped)
GUID-64 1B8C15-6D 62-4E79-8CC A-B3D0181F0 28C
When youlock orunlock thedoors including theback
door, theclearance lights,taillights andthelicense
plate lightwillilluminate foraperiod oftime. The
welcome lightandfarewell lightfunction canbe
disabled. Forinformation aboutdisabling thewelcome
light andfarewell lightfunction, contactaNISSAN
dealer.
Locking doors
T32A130 827-785FF3 96-2160-40C4-993B-FF0C18489C 71
1. Place theignition switchinthe ªOFFº position.
2. Carry theIntelligent Key with you.
3. Close alldoors.
4. Push thedoor handle request switch
*
A
(driver's
or front passenger's) orthe back doorrequest
switch
*
B
.
5. Alldoors andtheback doorwillbelocked. The
door lockindicator light
(located onthe
instrument panel)willilluminate for1minutes (if
equipped) .
6. Operate doorhandles toconfirm thatthedoors
have been securely locked.
Lockout protection (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o prevent theIntelligent Key from being accidentally
locked inthe vehicle, lockoutprotection isequipped
with theIntelligent Key system.
. When theIntelligent Key isleft inthe vehicle and
you trytolock thedoor using thedriver's inside
lock knob aftergetting outofthe vehicle, allthe
doors willunlock automatically andachime will
sound afterthedoor isclosed. .
When theIntelligent Key isleft inthe vehicle while
the driver's doorisopened andyoutrytolock the
door using thepower doorlockswitch after
getting outofthe vehicle, aninside warning chime
will sound afterthepower doorlockswitch orthe
driver's insidelockknob isoperated.
CAUTION:
The lockout protection maynotfunction under
the following conditions:
. When theIntelligent Keyisplaced ontop of
the instrument panel.
. When theIntelligent Keyisplaced onthe
tonneau cover(ifequipped) .
. When theIntelligent Keyisplaced insideof
the glove box.
. When theIntelligent Keyisplaced insideof
the door pockets.
. When theIntelligent Keyisplaced onor
under thespare tirearea.
. When theIntelligent Keyisplaced insideor
near metallic materials.
The lockout protection mayfunction whenthe
Intelligent Keyisoutside thevehicle butistoo
close tothe vehicle.
Unlocking doors
T32A130 827-9F0EC DCC-98CC-4 82A-89BC-2574C2B9A065
Switching doorunlock mode(ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o switch thedoor unlock modefromonetoanother,
see ªUsing remote keyless entryfunctionº (P.3-17) .
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Selective doorunlock mode(ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Carry theIntelligent Key with you.
2. Push thedoor handle request switch
*
A
or the
back doorrequest switch
*
B
.
3. Driver's doorhandle orback doorrequest switch:
Only thecorresponding doorwillbeunlocked.
Front passenger's doorhandle request switch:
All doors (including theback door) willbe
unlocked. (Selective doorunlock modeisnot
available.)
4. Push thedoor handle request switchagainwithin
1 minute or5seconds.
5. Alldoors willbeunlocked.
6. Operate thedoor handles toopen thedoors.
All door unlock mode:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Carry theIntelligent Key with you.
2. Push thedoor handle request switch
*
A
or back
door request switch
*
B
.
3. Alldoors andtheback doorwillbeunlocked.
If adoor handle ispulled whileunlocking thedoors,
that door maynotbeunlocked. Returning thedoor
handle toits original position willunlock thedoor. Ifthe
door does notunlock, afterreturning thedoor handle,
push thedoor handle request switchtounlock the
door.
All doors willbelocked automatically unlessoneofthe
following operations isperformed within1minute or30
seconds afterpushing therequest switchwhilethe
doors arelocked.
. Opening anydoors.
. Pushing theignition switch.
If during thepreset timeperiod theªUNL OCKº
button onthe Intelligent Key ispushed, alldoors willbe locked
automatically afterthenext preset time.
Opening powerbackdoor(ifequipped)
GUID-6F6E1 12C-A657-42AE-A90A-4 232E4A066AD
1. Carry theIntelligent Key .
2. Push thepower backdooropener switch
*
C
.
3. Theback doorwillunlock andautomatically open.
The hazard indicator flashes4times andtheoutside
chime sounds.
T o close theback door, pushthepower backdoor
button onthe Intelligent Key ,the power backdoor
switch onthe instrument panelorthe lower partofthe
back door. (SeeªBack doorº(P.3-23) .)
W ARNING SIGNALS
T32A1308 27-300A264 1-0F13-46BD-B700-FFCF 5A9F7997
The Intelligent Key system isequipped withafunction
that isdesigned tominimize improper operations and
to help prevent thevehicle frombeing stolen. The
warning buzzersounds andthewarning lightillumi-
nates orthe warning displayappears onthe vehicle
information displaywhenimproper operations are
detected.
CAUTION:
When thebuzzer sounds andthewarning light
illuminates orthe warning displayappears, be
sure tocheck boththevehicle andtheIntelligent
Key.
Pre-driving checksandadjustments
3-15
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-18
Pre-driving checksandadjustments
Locking doors
GUID-59 C48714-709 2-416E-964F-87ABE0DE37CD
1. Place theignition switchinthe ªOFFº position and
carry theIntelligent Key .
2. Close alldoors (including theback door).
3. Push theªLOCKº button
*
A
on the Intelligent
K ey .
4. Alldoors willbelocked. Thedoor lockindicator
light
(located onthe instrument panel)will
illuminate for1minutes (ifequipped) .
5. Operate thedoor handles toconfirm thatthe
doors havebeen securely locked.
CAUTION:
After locking thedoors usingtheIntelligent Key,
be sure thatthedoors havebeen securely
locked byoperating thedoor handles.
Unlocking doors
GUID-02 C4F53F-111 C-4240-90DA-B021C839 0A59
When youfirst receive thevehicle, thedoor unlock
mode isset tounlock allthe doors withonepush ofthe
ªUNL OCKº button
*
B
. The door unlock modecanbe
switched tothe selective doorunlock mode(if
equipped) .
T o change thedoor unlock modefromonetoanother,
see ªVehicle information displayº(P.2-20) .
All door unlock mode:
1. Push theªUNL OCKº button
*
B
on the Intelligent
K ey .
2. Alldoors (including theback door) willbe
unlocked.
Selective doorunlock mode(ifequipped):
1. Push theªUNL OCKº button
*
B
on the Intelligent
K ey . 2.
The driver's doorwillbeunlocked.
3. Push theªUNL OCKº button
*
B
on the Intelligent
K ey again.
4. Alldoors (including theback door) willbe
unlocked.
Automatic relock:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
All doors willbelocked automatically unlessoneofthe
following operations isperformed within30seconds or
1 minute afterpushing theªUNL OCKº button
*
B
on
the Intelligent Key while thedoors arelocked. Ifduring
this 30seconds or1minute timeperiod, the
ªUNL OCKº button
*
B
on the Intelligent Key is
pushed, alldoors willbelocked automatically after
another 30seconds or1minute.
. Opening anydoor orback door.
. Pushing theignition switch.
Opening orclosing backdoor(ifequipped)
GUID-7A97 DFB7-E05B -4600-BFF6 -A75E59407 982
Opening:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push thepower backdoor button
*
C
for
more than1second.
2. The back doorwillautomatically open.
The hazard indicator flashes4times andtheoutside
chime sounds.
Closing:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Push thepower backdoorbutton
*
C
.
2. The back doorwillautomatically close.
The hazard indicator flashes4times andtheoutside
chime sounds.
If the button
*
C
is pushed whiletheback door
is being opened orclosed, theback doorwillreverse.
Using panicalarm(ifequipped)
GUID-493 7A23C-01 2A-422A-B E61-A0FEA 679E405
If you arenear yourvehicle andfeelthreatened, you
may activate thealarm tocall attention asfollows:
1. Push theªPANICº
button
*
D
on the
Intelligent Key for more than1second.
2. The theft warning alarmandheadlights (if
equipped) willstay onfor 25 seconds.
3. The panic alarmstops when:
.
It has runfor25 seconds, or
.
Any ofthe buttons onthe Intelligent Key are
pushed. (Note:Panicbutton should bepushed
for more than1second.)
HAZARD INDICATOR AND HORN OPERA-
TION
GUID-D81 C103B-F4 9C-4165-99 66-43D3288AC0B0
When youlock orunlock thedoors orthe back door
with therequest switchorthe remote keyless entry
function, thehazard indicator willflash andthehorn or
the outside chimewillsound asaconfirmation.
The following descriptions showhowthehazard
indicator andoutside chimewillactivate whenlocking
or unlocking thedoors orback door.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
OPENING HOOD
T32A1308 27-335B9F3 6-A2B6-4F60-8C88-243 636A15C7A
JVP0288X
1. Pull thehood lockrelease handle
*
1
located
below theinstrument paneluntilthehood springs
up.
2. Locate thelever
*
2
in between thehood and
grille, andpush thelever sideways withyour
fingertips.
3. Raise thehood.
4. Remove thesupport rodand insert itinto theslot
*
3
.
Hold thecoated parts
*
A
when removing or
resetting thesupport rod.Avoid directcontact
with themetal parts, asthey maybehot
immediately aftertheengine hasbeen stopped.
CL OSING HOOD
T32A130827- 25073346-5A1D-4F8E-8 B28-82B4A41B9CC7
1. While supporting thehood, return thesupport rod
to its original position.
2. Slowly lowerthehood toabout 20to30 cm (8to
12 in)above thehood lock,thenletitdrop.
3. Make sureitis securely latched.
T32A130827- 405C1781-AE 61-4D43-A40E-A626866CFB76
WARNING:
. Always besure theback doorhasbeen
closed securely toprevent itfrom opening
while driving.
. Donot drive withtheback dooropen. This
could allowdangerous exhaustgasestobe
drawn intothevehicle. SeeªPrecautions
when starting anddrivingº (P.5-3) forex-
haust gas.
. Donot leave children unattended insidethe
vehicle. Theycould unknowingly activate
switches orcontrols. Unattended children
could become involved inserious accidents.
. Always besure thathands andfeet areclear
of the door frame toavoid injury while
closing theback door.
OPERA TINGMANUAL BACKDOOR
GUID-3A35 60E3-6F46-4 D3E-8487-69C8562C7AD 6
JVP0281X
T o open theback door, unlock itand push theopener
switch
*
A
. Pull upthe back doortoopen.
The back doorcanbeunlocked by:
Pre-driving checksandadjustments
3-23
BACK
DOOR
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-24
Pre-driving checksandadjustments
. pushing theªUNL OCKº
button onthe key.
. pushing theback doorrequest switch(if
equipped) .
. pushing thedoor handle request switch(if
equipped) .
. pushing thepower doorlockswitch tothe unlock
position.
T o close theback door, pulldown untilitsecurely
locks.
OPERA TINGPOWER BACKDOOR (if
equipped)
GUID-436541 C3-01DD-453A-AEA7-12BEFABBEB19
T o operate thepower backdoor, theshift lever must be
in the P(Park) position.
The power backdoorwillnotoperate ifthe battery
voltage islow .
P ower backdoormain switch
GUID-1E87 F67F-2B4F-4 F44-B5FB-976E0AD39F 92
JVP0282X
T ype A
*
1
P ower open (hands-free operation)
*
2
P ower open/close (switchoperation)
*
3
Manual operation
JVP0309X
T ype B
*
1
P ower open/close (switchoperation)
*
2
Manual operation
The power backdooroperation canbeturned onoroff
with thepower backdoormain switch onthe
instrument panel.
When thepower doormain switch ispushed tothe
ªOFFº position
*
3
(T ype A)or
*
2
(T ype B),power
operation isavailable byusing thepower backdoor
button onthe Intelligent Key .
P ower open (switch operation)
GUID-FEE A27BB-7EA9-4 260-927A-54954CB04 325
JVP0290X
Power backdoorswitch ÐInstrument panel
JVP0283X
Back dooropener switch
SP A2562
Power backdoorbutton - Key
JVP0285X
Power backdoorswitch ÐBack door
When theback doorisfully closed, theback doorwill
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
fully open automatically by:
. pushing thepower backdoorswitch
*
A
on the
instrument panelformore than1second
. pushing theback dooropener switch
*
B
. pushing thepower backdoorbutton
*
C
on the
key formore than1second
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts opening.
NO TE:
The back doorcanbeopened bythe power back
door switch
*
A
or the power backdoorbutton
*
C
even ifthe back doorislocked. The
back doorcanbeunlocked andopened inde-
pendently ofthe other doors, evenwhen theyare
locked.
P ower open (hands-free operation)
GUID-961B2 5EC-1E8A-4E34-B404-F0 E5F836460B
JVP0286X
When theback doorisfully closed, theback doorwill
fully open automatically byhands-free operation.
1. Carry theIntelligent Key .
2. Put your hand orluggage nearthehands-free
sensor
*
E
, as illustrated, forabout 1second. 3.
Theback doorwillunlock andautomatically open.
The back doorwillopen regardless ofthe lock status.
The hands-free sensorwillnotfunction underthe
following conditions:
. When theIntelligent Key isnot carried withyou.
. When theback doorisopen.
. When automatic operationofthe back dooris
being performed.
The hazard flashes 4times andtheoutside chime
sounds whentheback doorstarts opening.
JVP0302X
NO TE:
. The back doorcannot beclosed automati-
cally byusing thehands-free sensor
*
E
.
. All doors willlock while thehands-free
sensor isbeing used.
. Ifdirt attaches tothe surface ofthe hands-
free sensor, thesensor maynotfunction.
Wipe thesensor usingaclean cloth.
. Ifwater issplashed tothe area around the
hands-free sensor,itmay cause amalfunc-
tion. .
The operating range
*
F
of the hands-free
sensor iswithin 80mm (3.1in)ofthe center
of the sensor.
CAUTION:
. The back doormayopen evenifsomething
other thanyourhand orluggage entersthe
operating rangeofthe hands-free sensor
when theIntelligent Keyiscarried withyou.
. Even ifthe Intelligent Keyiscarried withyou,
the back doorcannot beopened when
something suchasleather glovesabsorb
the light isput tothe hands-free sensor.
. The back doormaynotopen, ifthe head-
lights, sunlight oranother lightsource
shines directly onthe sensor, oran acces-
sory such asaframe isattached tothe
license plate,evenifyour hand orluggage
enters theoperating rangeofthe hands-free
sensor whentheIntelligent Keyiscarried
with you.
. When washing, waxingormaintaining your
vehicle, placingorreplacing thebody cover,
or splashing watertothe area around the
hands-free sensor,placethepower back
door main switch tothe
*
2
position or
*
3
position.
. The hands-free sensordetects objects by
infrared light.Never movethesensor. Ifthe
location ofthe sensor, angleofthe sensor or
direction oflight irradiation change,itmay
lead tonon-operation, incorrectdetection or
other operating malfunctions.
. Ifthe automatic open/close operationis
performed consecutively, thesafety mode
activates andtheoperation cannotbeper-
Pre-driving checksandadjustments
3-25
&RQGLWLRQ
([FHSWIRU&KLQD