light Oldsmobile Cutlass Supreme 1993 s Owner's Guide

100
Anti-Lock Brake System Warning Light
(CONT.)
is also on, see Brake System Warning
Light earlier in this section.
If the anti-lock brake system warning
light ever flashes, your anti-lock bralre system is still working but needs service
as soon as possible.
Malfunction lnelicator Lamp
(Service Engine Soon Light)
A computer monitors operation of your
fuel, ignition and emission control
.systems.
This light should come on
when the ignition is on, but the engine
is not running, as a check
to show you-
it is working. If it does not come on at
all, have it fixed right away. If it stays
on,
or it comes on while you are driving,
the computer is indicating that you
have
a problem. You should take your
vehicle in
for service soon.

102
Although the HUD irinage apper
to be near the front
of the vehicl
do not, use it as a parking aid. T1
HUD was not designed For that
rpose.
If you try to use it that
way, such as in a parltirig lot, yo
may misjudge distance
ct run
:o somethin!
To adjust the HUD so you can see it
properly:
1. Start your engine and slide the HUD
dimmer control (located below the
climate controls) all the way to
MAX.
The brightness of the HUD image is
determined
by whether the headlight
switch is on or
off, and where you
have set the HUD dimmer control.

2. Adjust the seat, if necessary, before
setting the height control.
Rotate the HUD image height control
all the way up, raising the image as
far as possible. Then rotate the HUD
image height control downward
so
the image is as low as possible but in
full view.
3. Slide the dimmer control toward
OFF until the HUD image is no
brighter than necessary.
To turn the
HUD off, slide the HUD dimmer
control to
OFF.
If the sun comes out, or it becomes
cloudy, or
if you turn on your
headlights, you may need
to adjust the
HUD's brightness using the HUD
dimmer control. Polarizing sunglasses
could make the HUD image harder
to see.
I I
CAUTION I
A
If the HUD image is too
bright, or too high
in your
field of view, it may take you more
time to see things you need to see
when it's dark outside. Be sure to
I
keep the HUD image dim and
I placed low in your field of view.
203

Comfort Controls &Audio Systems
Ekctronic Climate Control
114
(Cont.)
temperature caused by sunlight. To
keep you comfortable, it reduces the
interior temperature by as much as 5°F
(3°C) below the setting
on the digital
screen.
AUTO: To allow the system to
automatically control the temperature,
air distribution and fan speed:
1. Set the temperature you want with
the
COOL/WARM switch.
2. Press the AUTO switch. The AUTO
symbol will appear on the digital
screen.
The system will approach the
temperature you select as quickly as
possible. For most efficient operation,
just set the system temperature where
you would like it and drive away.
OUTS TEMP: Press to have the
outside temperature displayed on the
digital screen. Press again to return to
the inside temperature setting.
If the system is left in the outside
temperature mode, the outside
temperature will be displayed except
when changing the inside temperature
setting using the
COOL/WARM
switch. The display will return to the
outside temperature setting in about
five seconds. Use
the following controls when the
system is not set on
AUTO:
8: Press the top of the switch to raise
the fan speed, the bottom of the switch
to lower the fan speed. The fan symbol
and bar graph will be displayed on the
digital screen.
When the
AUTO switch is pressed, the
fan symbol will go out and the fan will
return to automatic operation.
If the Fahrenheit (F") or Celsius (C")
symbol begins to flash, or flashes when
you turn on the ignition,
it indicates an
electrical problem with your air conditioning system. The flashing
will
continue for about two minutes. It
means
you should have your system
serviced.

Directional Controls
When the following buttons are pressed,
an indicator light will glow above the
button.
BI-LEV (Bi-Level): Use on cool, but
sunny days. This setting brings in the
outside air, but directs it in two ways.
The cool air is directed to the upper
portion of your body through the
instrument panel outlets, but most
warmed air is directed through the
heater ducts and a little to the defrost
and side window vents. At times this
temperature difference may be more
apparent than others.
UPPER: Press to direct air flow
through the instrument panel outlets
only.
LOWER: Press to direct 90% of the air
flow through the heater ducts, and
10%
of the air flow through the windshield
defroster vents.
DEFOG: Press to direct half the air to
the windshield, and the other half
through the heater ducts.
DEF (Defrost): Press to direct 90% of
the air to the windshield and side
window vents, and
10% to the floor.
The fan will automatically go to high.
For a lower fan speed, press the fan
switch.
OFF: Press to turn off the system.
Some air will still come
from the outlets
at the floor.
115

116
Comfort Controk &Audio Systems
Steering Wheel Touch Controls
for Climate Control
(OPTION)
Some heating and cooling controls can
be adjusted at the steering wheel. These
touch controls also operate some audio
controls. See the
Index under Steering
Wheel
Touch Controls for Audio
System.
FAN: Press the upper part of the
control to increase the fan speed; press
the lower part to reduce the fan speed.
TEMP: Press the upper part of the
control to raise the inside temperature
setting; press the lower part to lower
the setting.
MODE: This control can be used to
select the direction of air flow
(BI-LEV, UPPER, or LOWER
settings), or to select DEFOG,
DEF
(Defrost) or AUTO. Press the top
of the control to move to the next mode
on the right of the climate control
panel. Press the bottom
of the control
to move to the next mode on the left.
The indicator light will glow above the
selected mode, or
AUTO will appear on
the digital display.
Rear Window Defogger (OPTION)
R DEFOG: Press to warm the
defogger grid on the rear window. The
indicator light will glow while the rear
window defogger is operating. The rear
window defogger will turn off
automatically after about
10 minutes of
use. If you turn it on again, the defogger
will operate for about five minutes only.
You can also turn the defogger off by
turning off the ignition or pressing the
R DEFOG switch again.
Do not attach a temporary vehicle
license across the defogger grid
on the
rear window.

Comfort Controls &Audio Systems
128
AMIFM Stereo with Cassette
Player and Graphic Equalizer
(CONT.)
Tape Player
Your tape player sets itself automatically
for tape bias. This audio system has
automatic
00 Dolby B NR@ to reduce
background noise on Dolby encoded
tapes. Dolby@ Noise Reduction is
manufactured under license from Dolby
Laboratories Licensing Corporation. Dolby@ and the
00 symbol are
trademarks of Dolby Laboratories
Licensing Corporation.
Press
POWER to turn the radio on.
Then push a cassette into the cassette
entry door (the tape side goes in first). Using
tapes that are longer than
90
minutes (45 minutes on each side) is
not recommended.
FWD (Fast Forward): Press to
advance the tape rapidly; press again
to play. (The radio plays while a tape
is fast forwarding.)
REV (Reverse) : Press to reverse the
tape rapidly; press again
to play tape.
(The radio plays while a tape is
rewinding.)
SEEK: Press to advance the tape to the
beginning of the next selection.
REPT (Repeat) : Press to rewind the
tape to the beginning of a selection.
PROG (Program): Press to change
the side of tape being played. When the
arrow pointing up is lighted, the
selections listed on the top side of the
tape are played. When the arrow
pointing down is lighted, selections
listed on the bottom side of the tape are
played. The tape player automatically
begins playing the other side when it
reaches the end of the tape.
CRO,: This button sets tape bias.
When playing high bias chrome or metal tapes, press the button to turn the
button light on. When playing standard
tapes, press again to turn the light
off.
EJECT: Press to have the cassette tape
ejected (the radio will then play).

Comfort ConolIs &Audio Systems
134
Understanding Radio Reception
(CONT.)
AM Stereo
Your Delco* system maybe able to
receive C-Quamm stereo broadcasts.
Many AM stations around the country
use C-Quamm to produce stereo, though
some do not. C-Quam@ is a registered
trademark
of Motorola, Inc~. If your
Ddco@ system can get C-Quam@
signals, your stereo indicator
light will
come on when you are receiving it.
Care of Your Cassette Tape
Player
A tape player that is not cleaned
regularly can cause reduced sound
quality, ruined cassettes,
or a damaged
mechanism. Cassette tapes should be
stored in their cases away from
contaminants, direct sunlight, and
extreme heat.
If they aren’t, they may
not operate properly or cause failure
of
the tape player.
Your tape player should be cleaned
regularly each month or
after every 15
hours of use. If you notice a reduction
in sound quality, try a knomgood

Care of Your Compact Discs
Handle discs carefully. Store them in
their original cases or other protective
cases and away from direct sunlight and
dust. If the surface of a disc is soiled,
dampen
a clean, soft cloth in a mild,
neutral detergent solution and clean it,
wiping from the center to the edge.
Be sure never to touch the signal
surface when handling discs. Pick up
discs by grasping the outer edges .or the
edge of the hole and the outer edge.
Fixed Mast Antenna
The fixed mast antenna can withstand
most car washes without being
damaged. If the mast should ever
become slightly bent, you can straighten
it
out by hand. If the mast is badly bent,
as it might be-
by vandals, you should
replace it.
Check every once in a while to be sure
the mast is still tightened to the fender.
Power Antenna Mast Care
Your power antenna will look its best
and work well if it’s cleaned from time
to time.
To Clean the Antenna Mast:
1. Turn on the ignition and radio to
raise the antenna to full mast
extension.
spirits or equivalent solvent.
2. Dampen a clean cloth with mineral
3. Wipe the cloth over the mast
sections, removing any dirt.
135

142
KEEP LEFl “,3 RIGHTTURN
RIGHT THROUGH ONLY
Shape of Road Signs (CONT.)
Rectangular (square or
oblong) signs
show speed limits, parking regulations,
give directions, and such information as
distances to cities.
Symbols on Road Signs
There are many international road signs
in use today.
NO U TURN NO NO PARKING BICYCLES
The basic message
of many of these
signs
is in pictures or graphic symb01~.
A picture within a circle with a diagonal
line across it shows what
not to do.
Traffic Dghts
We’re all familiar with traffic lights or
stop lights. Often green arrows are
being used in the lights for improved
traffic control. On some multilane
roads, green arrows light up, indicating
that traffic in one or more lanes can
move or make a turn. Green arrows
don’t mean “go no matter what.”
You’ll still need to proceed with
caution, yielding the right of way to
pedestrians and sometimes to other
vehicles.
Some traffic lights also use red arrows
to signify that
you must stop before
turning
on red.