esp Peugeot 206 P Dag 2009 User Guide
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2009, Model line: 206 P Dag, Model: Peugeot 206 P Dag 2009Pages: 113, PDF Size: 4.32 MB
Page 69 of 113
i
64
CRUISE CONTROL
System which automatically maintains
the speed of the vehicle at the value
programmed by the driver, without any
action on the accelerator pedal.
The cruise control is switched on
manually: it requires a minimum vehicle
speed of 25 mph (40 km/h) and the en-
gaging of fourth gear.
The cruise control is switched off man-
ually or by pressing the brake or clutch
pedal or on triggering of the ESP sys-
tem for safety reasons.
It is possible to exceed the programmed
speed temporarily by pressing the ac-
celerator pedal.
To return to the programmed speed,
simply release the accelerator pedal.
Switching off the ignition cancels any
programmed speed value. The controls of this system are grouped
together on lever
A .
1. Cruise control mode selection dial
2. Speed programming/value decrease
button
3. Speed programming/value increase
button
4. Cruise control off/resume button The programmed information is grouped
together on the instrument panel display.
5. Cruise control off/resume indication
6. Cruise control mode selection indication
7. Programmed speed value
Steering wheel controls Displays on the instrument
panel
The cruise control cannot, in any
circumstances, replace the need
to respect speed limits, nor can it
replace the need for vigilance and
responsibility on the part of the
driver.
Page 71 of 113
66
SPEED LIMITER
System which prevents the vehicle from
exceeding the speed programmed by
the driver.
When the programmed speed limit is
reached, pressing the accelerator pedal
no longer has any effect.
The speed limiter is switched on man-
ually: it requires a programmed speed
of at least 20 mph (30 km/h).
The speed limiter is switched off by
manual operation of the control.
The programmed speed can be
exceeded temporarily by pressing the
a c c e l e r a t o r fi r m l y .
To return to the programmed speed,
simply slow down to a speed below the
programmed speed.
The programmed speed remains in the
memory when the ignition is switched
off.
The speed limiter cannot, in any circum-
stances, replace the need to respect
speed limits, nor can it replace the need
for vigilance and responsibility on the
part of the driver. The controls of this system are grouped
together on stalk
A .
1. Speed limiter mode selection dial
2. Value decrease button
3. Value increase button
4. Speed limiter on/off button The programmed information is grouped
together on the instrument panel dis-
play.
5. Speed limiter on/off indication
6. Speed limiter mode selection
indication
7. Programmed speed value
Steering wheel controls Displays on the instrument
panel
Page 86 of 113
81
CHANGING A FUSE
Operating procedure for replacing a
faulty fuse with a new fuse to rectify a
failure of the corresponding function.
The fuse boxes are located under the
fascia and in the engine compartment.
Fascia fuse box
Unscrew the catch a quarter turn using
a coin then remove the cover to gain
access to the fuses.
The spare fuses and the pliers A are
s e c u r e d o n a r e m o v a b l e s u p p o r t fi x e d
horizontally inside the fascia fuse box. R e m o v i n g a n d fi t t i n g a f u s e
Before changing a fuse, the cause of the fault must be fou
nd and remedied. The
fuse numbers are indicated on the fuse box.
Use the pliers A .
Always replace a faulty fuse with a fuse of the same rating .
Pliers A
Correct Incorrect
Page 87 of 113
81
CHANGING A FUSE
Operating procedure for replacing a
faulty fuse with a new fuse to rectify a
failure of the corresponding function.
The fuse boxes are located under the
fascia and in the engine compartment.
Fascia fuse box
Unscrew the catch a quarter turn using
a coin then remove the cover to gain
access to the fuses.
The spare fuses and the pliers A are
s e c u r e d o n a r e m o v a b l e s u p p o r t fi x e d
horizontally inside the fascia fuse box. R e m o v i n g a n d fi t t i n g a f u s e
Before changing a fuse, the cause of the fault must be fou
nd and remedied. The
fuse numbers are indicated on the fuse box.
Use the pliers A .
Always replace a faulty fuse with a fuse of the same rating .
Pliers A
Correct Incorrect
Page 90 of 113
!
84
The electrical circuit of your
vehicle is designed to operate with
standard or optional equipment.
Before installing other electrical
equipment or accessories in your
vehicle, consult a PEUGEOT
dealer.
Some electrical accessories or
t h e w a y i n w h i c h t h e y a r e fi t t e d
may have an adverse effect on
the operation of your vehicle (its
electronic control circuits, the
audio circuit and the electrical
charging circuit).
PEUGEOT declines any respon-
sibility for expenses incurred
through the repair of your vehicle
or for any malfunctions resulting
from the installation of auxiliary
accessories, not supplied and not
recommended by PEUGEOT and
not installed in accordance with
PEUGEOT's instructions, in par-
ticular when the combined con-
sumption of all of the additional
equipment connected exceeds
10 milliamps.
The maxi fuses present provide
additional protection for the elec-
trical systems. Any work on these
fuses must be carried out by a
PEUGEOT dealer.
Fuse N° Rating Functions
MF1 20 A/50 A Fan unit without/with air conditio ning
MF2 20 A/30 A ABS/ESP
MF3 20 A/30 A ABS/ESP
MF4 70 A Built-in systems interface (BSI) supply
MF5 70 A Built-in systems interface (BSI) supply
MF6 - Not used
MF7 30 A Ignition switch supply
MF8 - Not used
Page 98 of 113
91
The consumption values presented here correspond to the values communicated at the time of printing. These consumption
values were established in accordance with Directive 80/1268/CEE. They may vary depending on the style of driving, driving
conditions, weather conditions, the vehicle load, the maint enance of the vehicle and the use of the accessories.
CONSUMPTION In accordance with directive 80/1268/CEE
Petrol engines Gearbox Model codes:
Urban driving
(litres/100 km)
Inter-urban
driving
(litres/100 km)
Mixed driving
(litres/100 km)
Emission of
CO 2 by weight
(g/km)
1.1 litre 60 bhp
Manual
2LHFXA
2MHFXA 8.2 4.7 5.9 140
1.4 litre 75 bhp
2LKFWA
2MKFWA 9.1 4.8 6.3 150
Quality of the fuel used for petrol engines
The petrol engines are perfectly compatible with E5 type pet rol biofuels (containing 5 % ethanol), conforming to European
standard EN 228.
E85 type fuels (containing up to 85 % ethanol) are reserved e xclusively for vehicles marketed for the use of this type of fuel
(BioFlex vehicles). The quality of the ethanol must comply with European standard EN 15 376.
For Brazil only, special vehicles are marketed to run on fuels co ntaining up to 100 % ethanol (type E100).
Page 99 of 113
94
CONSUMPTION In accordance with directive 80/1268/CEE
Diesel engine Gearbox Model codes
Urban driving
(litres/100 km)
Inter-urban
driving
(litres/100 km)
Mixed driving
(litres/100 km)
Emission of
CO 2 by weight
(g/km)
1.4 litre Turbo
HDI 70 bhp
Manual
2L8HZA
2M8HZA 5.4 3.5 4.2 110
Quality of the fuel used for Diesel engines
The Diesel engines are perfectly compatible with biofuels w hich conform to current and future European standards (diesel
fuel which complies with standard EN 590 mixed with a biofue l which complies with standard EN 14214) which can be
distributed at the pumps (possible incorporation of 0 to 7 % Fatty Acid Methyl Ester).
The use of any other type of (bio) fuel (vegetable or animal oils, domestic fuel...) is strictly prohibited (risk of damage to the
engine and fuel circuit).
The consumption values presented here correspond to the values co
mmunicated at the time of printing. These consumption
values were established in accordance with Directive 80/1268/CEE. They may vary depending on the style of driving, driving
conditions, weather conditions, the vehicle load, the maint enance of the vehicle and the use of the accessories.
Page 110 of 113
10
103
Automatic station search
P r e s s b u t t o n J or L b r i e fl y t o l i s t e n t o
t h e s t a t i o n i m m e d i a t e l y a b o v e o r b e l o w .
B y c o n t i n u i n g t o p r e s s t h e b u t t o n i n t h e
d i r e c t i o n s e l e c t e d , y o u w i l l o b t a i n c o n -
t i n u o u s s c r o l l i n g o f t h e f r e q u e n c y .
T h e s c r o l l i n g s t o p s a t t h e fi r s t s t a t i o n
found when the button is released.
If the TA t r a f fi c i n f o r m a t i o n p r o g r a m m e
i s s e l e c t e d , o n l y s t a t i o n s b r o a d c a s t i n g
t h i s t y p e o f p r o g r a m m e a r e s e l e c t e d .
S e a r c h i n g f o r a s t a t i o n t a k e s p l a c e fi r s t
in "LO" s e n s i t i v i t y ( s e l e c t i o n o f t h e m o s t
powerful transmitters) during scanning
of the waveband, then in "DX" s e n s i t i v -
i t y ( s e l e c t i o n o f t h e w e a k e s t a n d m o s t
distant transmitters).
T o c a r r y o u t a "DX" s e n s i t i v i t y s e a r c h
d i r e c t l y , p r e s s b u t t o n J or L twice. Manual station search
P r e s s t h e
"MAN" button.
P r e s s b u t t o n J or L b r i e fl y t o i n c r e a s e o r
d e c r e a s e t h e f r e q u e n c y d i s p l a y e d .
B y c o n t i n u i n g t o p r e s s t h e b u t t o n i n t h e
d i r e c t i o n s e l e c t e d , y o u w i l l o b t a i n c o n -
t i n u o u s s c r o l l i n g o f t h e f r e q u e n c y .
T h e s c r o l l i n g s t o p s a s s o o n a s t h e b u t -
ton is released.
P r e s s i n g t h e "MAN" b u t t o n a g a i n r e -
t u r n s y o u t o t h e a u t o m a t i c s t a t i o n
search.
Manual storing of stations
S e l e c t t h e s t a t i o n r e q u i r e d .
P r e s s o n e o f t h e b u t t o n s "1" to "6" for
more than two seconds.
The sound stops then becomes audible
a g a i n , c o n fi r m i n g t h a t t h e s t a t i o n h a s
been stored. Automatic storing of FM stations
(autostore)
P r e s s b u t t o n O for more
than two seconds.
Recalling stored stations
On each waveband, press one of the
buttons "1" to "6" b r i e fl y t o r e c a l l t h e
corresponding stored station.
Y o u r r a d i o a u t o m a t i c a l l y s t o r e s t h e
6 stations with the strongest signal on
FM . These stations are stored on the
FMast waveband.
I f i t i s n o t p o s s i b l e t o fi n d s i x s t a t i o n s , t h e
unused memories remain unchanged.
Page 113 of 113
91
The consumption values presented here correspond to the values communicated at the time of printing. These consumption
values were established in accordance with Directive 80/1268/CEE. They may vary depending on the style of driving, driving
conditions, weather conditions, the vehicle load, the maint enance of the vehicle and the use of the accessories.
CONSUMPTION In accordance with directive 80/1268/CEE
Petrol engines Gearbox Model codes:
Urban driving
(litres/100 km)
Inter-urban
driving
(litres/100 km)
Mixed driving
(litres/100 km)
Emission of
CO 2 by weight
(g/km)
1.1 litre 60 bhp
Manual
2LHFXA
2MHFXA 8.2 4.7 5.9
135
1.4 litre 75 bhp
2LKFWA
2MKFWA 9.1 4.8 6.3 150
Quality of the fuel used for petrol engines
The petrol engines are perfectly compatible with E5 type pet rol biofuels (containing 5 % ethanol), conforming to European
standard EN 228.
E85 type fuels (containing up to 85 % ethanol) are reserved e xclusively for vehicles marketed for the use of this type of fuel
(BioFlex vehicles). The quality of the ethanol must comply with European standard EN 15 376.
For Brazil only, special vehicles are marketed to run on fuels co ntaining up to 100 % ethanol (type E100).