WIRING Peugeot 301 2017 Owner's Manual

39
Alarm
Perimeter protection
The system checks for opening of the vehicle.
The alarm is triggered if anyone tries to open a
door, the boot, the bonnet...Self-protection function
The system checks for the putting out of
service of its components.
The alarm is triggered if the battery, the
central control or the siren wiring are put
out of service or damaged.
For all work on the alarm system,
contact a PEUGEOT dealer or a qualified
workshop.
Locking the vehicle with
alarm
Activation
F Turn the vehicle off and exit.
Deactivation
F Press the unlocking button on the remote control.
F

P
ress the locking button on the
remote control.
The alarm is activated: an indicator
light in the switch panel to the left of
the steering wheel flashes once per
second.
The alarm is deactivated: the
indicator lamp goes off.
Theft and break-in protection and deterrent
system. It provides perimeter protection as well
as a self-protection function.
The perimeter protection is activated 5 seconds
after pressing the locking button on the remote
control.
If an opening (door, boot...) is not closed
fully, the vehicle is not locked but the alarm is
activated.
2
Access

164
F Press the locking clip and disconnected the connector.
F

T
urn the bulb holder a quarter turn anti-
clockwise.
F

R
emove the bulb holder.
F

R
emove the bulb and replace it.
For reassembly, carry out these operations in
reverse order.
If you experience any difficulty in replacing
bulbs, contact your PEUGEOT dealer or a
qualified workshop.
Direction indicator side repeaters
F Insert a screwdriver towards the centre of the flasher between the flasher and the
base on the body.
F

L
ever with the screwdriver to extract the
repeater and pull it out.
F

D
isconnect the wiring from the repeater.
F

R
eplace the module.
For reassembly, carry out these operations in
reverse order.
Contact a PEUGEOT dealer or a qualified
workshop to obtain the module.
In the event of a breakdown