cruise control Peugeot 307 Dag 2003.5 Owner's Manual

29-09-2003
0 !
0"$ Cruise control enables the vehicle to maintain a steady speed pro-
grammed by the driver, regardless ofthe road characteristics and withoutthe driver having to touch the accelera-tor or brake pedals. In order for it to be memorised, the vehicle speed must be greater than25 mph (40 km/h) (manual gearbox)or 40 mph (60 km/h) (automaticgearbox) and fourth gear at leastmust be engaged (second gear forthe automatic gearbox).
 
Place switch %in the position.
A speed can be memorised.  Place switch %in the ;;posi-
tion to cancel.





 As soon as you reach the chosen speed, press button 8or . This
memorises the speed, which will be
maintained automatically. 
It is possible to accelerate and
drive momentarily at a speed greater than the memorised speed. Whenthe accelerator pedal is released, thevehicle will return to the memorisedspeed.
0
+ 



 If you wish to cancel the memorised speed:  press button ?or the brake or
clutch pedal. +




 After cancellation, press button
?.
Your vehicle will return to the last memorised speed.
0







To memorise a speed higher than the previous one:  press button ;
 release it when you have reached the required speed.
To memorise a speed lower than theprevious one:  appuyez sur la touche 8;
 release it when you have reached the required speed.
0
+ 

+-

+  Place switch %in the ;;posi-
tion or switch off the ignition.



!"# $ %@
*

 
 














29-09-2003
 +

&-+ Place switch %in the 0 ! posi-
tion. The cruise control is not yet active and no speed has been
memorised. The display indicates:
.+

&-+
&&  Place switch %in position or
$  " to switch the system off.
#+
>




 As soon as you reach the chosen speed, press button 8or . This
memorises the speed, which will
be maintained automatically. Thedisplay indicates (e.g. at 80 mph(130 km/h)): 
It is possible to accelerate and
drive momentarily at a speed greater
than the memorised speed. Thevalue memorised flashes. When theaccelerator pedal is released, thevehicle will return to the memorisedspeed.
0 !
0"$>!! $  "!A
0-

+
&-+

this enables
the vehicle to maintain a steady speed
programmed by the driver, regardlessof the road characteristics and withoutthe driver having to touch the accelera-tor or brake pedals. In order for it to be memorised, the vehicle speed must be greater than25 mph (40 km/h) with at least fourthgear engaged (second gear for theautomatic gearbox), .


- .
* During the year, according to engine.



!"# $
%B
0
+ 




 If you wish to cancel the memorised speed: Press button ?or the brake or clutch
pedal. The display indicates (e.g. at 80 mph (130 kmh)):

the speed memorised is can-
celled automatically if the vehiclespeed is less than 25 mph (40 kmh),or if the manual gearbox is in a gearlower than fourth (second gear forthe automatic gearbox) or if the ESPis activated.
+





 After cancellation, press button ?.
Your vehicle will return to the last
memorised speed. The display indi-cates (e.g. at 80 mph (130 km/h)):

29-09-2003



!"# $%
0







To memorise a speed higher than the previous one, there are twooptions: Without using the accelerator:  press button ;
A brief press increases by 1 mph (1 km/h). An extended press increases the
memorised speed progressively. Using the accelerator:  exceed the memorised speed until the required speed isreached,
 press button 8or .
To memorise a speed lower than theprevious one:  press button 8
A brief press decreases by 1 mph
(1 km/h). An extended press decreases
the memorised speed progressively.
0
+ 




  Place switch %in position or
$  " or switch off the ignition. 

++ In the event of a cruise control mal- function, the memorised speed iserased, the dashes flash for a fewseconds:
Contact a PEUGEOT dealer to have the system checked. 

the appearance of this display is
normal if the memorising conditions are not met.
*