audio PEUGEOT 4008 2014 Owner's Manual

256
01

















PWR/VOL
:


- audio system on/off.

- volume adjustment for the audio and
telephone functions.


Short press: change the audio source.
Long press: CD / MP3 / USB, SD, for fast
forward or back.
Long press: RADIO, automatic frequency
search down/up.

FOLDER
: allows selection of a folder or a
manual search for a radio station.


OPEN
: opens the screen and
gives access to CD and SD cards.
A second press closes the screen.

ZOOM
: zoom the map in or out.

Allows the colour map screen the be
switched between day and night mode
according to the state of the vehicle's
lighting.

Move a fi nger over the screen to operate
the system.
Use the buttons offered on the screen.


For safety reasons, the driver
must only carry out operations
which require prolonged
attention with the vehicle
stationary.


Insert the SD card containing
the navigation mapping data into
the left hand slot.
Insert the SD card containing
the audio data into the right
hand slot.


FIRST STEPS

257
02







Increase / reduce audio volume.

Search for a higher / lower radio frequency.
Previous/next CD track.
CD fast forward/back.

Long press: audio system on / off.
Short press: selection of the source in the
following order (in a loop):
CD, SD, USB/iPod, Bluetooth, AUX, FM,
MW, LW.


STEERING MOUNTED CONTROLS

259
03


















Description of the controls - Menus



SETTINGS
: used to manage the
different adjustments.

DESTINATION
: used to set
navigation options and select the
destination.


NAVI MENU
: used for adjustments
to the navigation system.


MODE
: used to select the audio
source.


INFO:
used to check information.

AUDIO
: display the screen for the
last audio source used.

MAP
: used to display the current
position of your vehicle on the map.

GENERAL OPERATION

277

Level 1


Level 2


Level 3


Comments




CD Repeat

Press to play the track repeatedly.

Scan
Press to play the start of each track for around 9 seconds.

Random
Press to play the tracks in random order.

Playback
Press to start play of the selected track.

Go Up 1 Level
Press to go up one level.

Go to ROOT
Press to open the folder structure.


SD Repeat

Press to play the track repeatedly.

Scan
Press to play the start of each track for around 9 seconds.

Random
Press to play the tracks in random order.

Playback
Press to start play of the selected track.

Go Up 1 Level
Press to go up one level.

Go to ROOT
Press to open the folder structure.


USB/iPod Repeat

Press to play the track repeatedly.

Scan
Press to play the start of each track for around 9 seconds.

Random
Press to play the tracks in random order.

Playback
Press to start play of the selected track.


Bluetooth Audio Repeat

Press to play the track repeatedly.

Scan
Press to play the start of each track for around 9 seconds.

Random
Press to play the tracks in random order.

Track
Press to start play of the selected track.


AUX Repeat

Press to play the track repeatedly.

Scan
Press to play the start of each track for around 9 seconds.

Random
Press to play the tracks in random order.

Playback
Press to start play of the selected track.

Go Up 1 Level
Press to go up one level.

Go to ROOT
Press to open the folder structure.

279
05

Press the AUDIO
button.
By default the screen displays the stations on FM1.


Selecting an FM station and presetting


Press SEEK TRACK
for a manual search up or
down. The frequency is modifi ed in step of 0.1 MHz.
Press and hold to fi nd a station automatically.
Press " Scan
" to search for stations that can be
received in the current location, until a station is
found.

You can also start a search by type of programme by
pressing " PTY Filter
".
Press " RDS Settings
".

Press " On
" or " Off
" to activate or deactivate the
functions:


- " AF Check
": automatic search for the best
frequency,

- " Reg
": switch to the regional frequencies.



Once the frequency has been selected, a long press
on the station until a "Beep" is heard will preset it.
The name of the station is displayed if it is available.



RDS settings


Press the AUDIO
button.
By default the screen displays the stations on FM1.

Turn the FOLDER / TUNE SOUND
knob to select a
station.

RADIO

280
05

Playing an MP3/WMA CD

When the MP3/WMA CD is inserted in the player,
playing of the tracks is automatic.
The tracks cannot be recorded onto the music server.

You can play CDs with up to 8 levels, 255 folders and
400 fi les maximum. Windows Media and Microsoft Corporation are trademarks
registered in the United States and/or other countries.













General notes on MP3/WMA CDs


What is the MP3/WMA fi le format?

MP3 is the abbreviation of MPEG-1 Audio Layer 3 and MPG is the
abbreviation of Motion Pictures Experts Group, a digital video data
compression standard used on media such as video CDs.
The MP3 compression reduces the number of bytes in a song by
eliminating the long sound waves in the range of frequencies which
are imperceptible to the human ear, so producing high quality audio
fi les with a low volume of data.
This compression divides the size of the content of a conventional
audio CD by approximately 10, which means that the content of
10 audio CDs can be recorded onto a single CD-R or CD-RW.
WMA is the abbreviation of Windows Media Audio, another audio
data compression standard offered by Microsoft.
It can be used to create and save audio fi les at a compression rate
higher than that of the MP3 format.
Acceptance of the fi les

Some blank CDs may not be played by your equipment (quality,
recording speed...).
When you burn a CD-R or CD-RW, select the ISO 9660 level 1.2 or
Joliet burning standard.
To obtain the best acoustic quality possible, select the lowest
burning speed.
The MPEG1 and MPEG2 standards are accepted.
Transmission speeds between 32 and 320 kbits/s and scans
between 16 kHz and 48 kHz are accepted.
To display the title information (the name of the artist, the title of the
album, etc...), the information contained in the ID3 Tags or the WMA
Tags must be included in the MP3/WMA fi les burned onto the disc.

Copyright

Your audio system may allow you to listen to music which is usually
protected by copyright in accordance with current national and
international standards. Please consult these standards and comply
with them.


MUSIC

282
05





















Using the USB port


With the vehicle stationary, ignition
switch in the LOCK
position, connect a
suitable cable to the portable player.
The USB port is used to connect a portable device (MP3 player,
Apple
® player, ...). The fi les are sent from the player to your audio
system and heard through the vehicle's speakers.

Then connect the cable to the vehicle's
USB port.
Models supported:
- iPod touch ® : FW version 1.1.1 or later.
- iPod classic ® : FW version 1.0 or later.
- iPod 5 th generation ®
: FW version 1.2.2 or later.
- iPod nano 5 th generation ®
: FW version 1.2 or later.
- iPod nano 2 nd generation ®
: FW version 1.1.2 or later.
- Compatible USB mass storage device: 256 Mb capacity or
greater.

File formats: MP3, WMA, AAC, WAV.
Maximum number of levels (including root): 8.
Number of folders: 700.
Number of fi les: 65 535.

Do not connect the portable device directly to the USB port, use a
cable.
To disconnect the cable, the ignition switch must be in the LOCK

position.
Navigation in the fi le base is done via the portable device / iPod
®
.
Take care not to trap the cable when closing the armrest.


MUSIC

283
05

Connecting APPLE ®
players


Connect the Apple ®
player to the USB port using a suitable cable (not
supplied).
Play starts automatically.

Control is via the audio system.

The classifi cations available are those of the portable device
connected (artists / albums / genres / playlists / audiobooks /
podcasts).
The default classifi cation used is by artist. To modify the classifi cation
used, return to the fi rst level of the menu then select the desired
classifi cation (playlists for example) and confi rm to go down through
the menu to the desired track.
The "Shuffl e tracks" mode on an iPod
®
corresponds to the "Random"
mode on the audio system.
The "Shuffl e albums" mode on an iPod
®
corresponds to the "Random
all" on the audio system.
"Shuffl e tracks" is restored by default on each connection.

The version of software in the audio system may not be compatible
with the generation of your Apple
® player.


MUSIC

292
08

Press the MODE
button then " Bluetooth Audio
" to
start Bluetooth mode.










Pairing a telephone


In the Bluetooth menu on your telephone, select the
system name in the list of devices detected.
Enter the code " 1212
" in the telephone and confi rm.
Select the telephone to connect then press this
button.

Press " Select Device to Connect
".
Wait until the telephone detected is displayed.
Press SETTINGS
.
Press " Edit
" to connect the telephone.

Press " System
" then " Pairing
".
You can register or delete a device in the list.


BLUETOOTH ®
STREAMING - TELEPHONE

293





TOUCH SCREEN AUDIO-CD
System


The system is protected in such a way that it will only
operate in your vehicle.

01 First steps - Control panel


For safety reasons, the driver must carry out operations
which require prolonged attention while the vehicle is
stationary.
When the engine is switched off and to prevent
discharging of the battery, the system switches off
following the activation of the energy economy mode.



CONTENTS

03 General operation
02 Steering mounted controls

04 Radio

05 CDs

06 USB / iPod
®


07 Bluetooth
®
telephone p.
p. p.
p.
p.
p.
p. 294
295
297
304
307
308
310