checking oil Peugeot iOn 2012 Owner's Manual - RHD (UK, Australia)

8
Practical information
95

2. Infl ation
FCheck that the compressor switch A
is in
the "OFF" position. FUncoil the compressor pipe B.
F
Connect this pipe to the valve of the
repaired wheel. F
Connect the compressor's electric plug to
the vehicle's 12 V socket (ignition switch in
position "ON" or "ACC"). F Star t the compressor by turning the
switch A
to the "ON" position. F
Using the compressor, adjust the pressure in accordance with the vehicle's tyre
pressure label (located in the driver's door
aperture).
A loss of pressure indicates that the
puncture has not been fully plugged;contact a PEUGEOT dealer or a qualified
workshop for assistance.
F Remove the compressor and stow the kit. F
Drive off straight away at reduced speed (50 mph [80 km/h] max) limiting
the distance travelled to approximately120 miles (200 km).



As soon as possible, go to a PEUGEOT dealer or a qualified workshop. Tell the technician that you have used the kit. After checking, the technicianwill advise you whether the tyre can berepaired or must be replaced.


If after around 5 to 7 minutes the pressure is not attained, this indicates that the tyre is not repairable; contacta PEUGEOT dealer or a qualifiedworkshop for assistance.