headlamp Peugeot iOn 2018 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2018, Model line: iOn, Model: Peugeot iOn 2018Pages: 136, PDF Size: 5.79 MB
Page 4 of 136
2
.
.
Instrument panel 7
W arning and indicator lamps 7
M
ain battery state of charge indicator
1
4
Energy consumption/generation indicator
1
4
Instrument panel display screen
1
5
Instruments and controls
4
R
emote control key
1
9
Doors
21
Boot
2
1
Electric windows
2
2
Charging flaps
2
3
Front seats
2
4
Rear seats
2
5
Mirrors
26
Interior fittings
2
7
Ventilation
2
9
Recommendations for ventilation and air
conditioning
3
0
Heating
3
1
Air conditioning
3
2
Front demist – defrost
3
4
Rear screen demist – defrost
3
4
Remote control
3
4Lighting control stalk
4
0
Headlamp beam height adjustment
4
2
Wiper control stalk
4
2
Courtesy lamp
4
3
General safety recommendations
4
5
Hazard warning lamps
4
6
Brake lamps, automatic operation
4
6
Horn
46
Horn for pedestrians
4
6
Emergency or assistance call
4
7
Braking assistance systems
4
8
Trajectory control systems
4
9
Engine brake reduction indicator lamp
5
0
Seat belts
5
1
Airbags
54
Child seats
5
7
Deactivating the passenger's front airbag
5
8
ISOFIX mountings and child seats
6
3
Advice on child seats
6
6
Child lock
6
7
Over view
Dashboard instruments Access
Ease of use and comfort Safety
Lighting and visibility
Eco-driving
Contents
Page 7 of 136
5
Instruments and controls (continued)1
Instrument panel
Warning and indicator lamps
Indicators:
-
m
ain battery state of charge indicator
-
e
nergy consumption/generation indicator
-
speedometer
-
t
otal distance recorder
-
t
rip distance recorder
-
l
ighting dimmer
-
s
er vice indicator
-
r
ange indicator
2
Lighting control stalk
Direction indicators
Automatic illumination of brake lamps
3
Door mirrors
Headlamp adjustment
Horn for pedestrians
4
Wiper control stalk
5
Hazard warning lamps
6
Emergency or assistance call
7
Ignition switch, starting/
switching off the vehicle
8
Horn
.
Over view
Page 15 of 136
13
Warning/indicator lampStateCause Action/Observations
Left-hand direction
indicator Flashing with audible
signal. The lighting control stalk has been moved
down.
Right-hand
direction indicator Flashing with audible
signal. The lighting control stalk has been moved
up.
Hazard warning
lamps Flashing with audible
signal. The hazard warning lamps switch, located
on the dashboard, has been operated.
The left-hand and right-hand direction indicators and
their associated lamps flash simultaneously.
Sidelamps and/
or dipped beam
headlampsFixed.
The sidelamps and/or dipped beam
headlamps have been switched on.
Front foglamps Fixed. The front foglamps have been switched on
using the ring on the lighting control stalk. Turn the ring on the lighting control stalk
twice rear wards to switch off the front
foglamps.
Main beam
headlamps Fixed.
The lighting control stalk has been pulled
towards you. Pull the lighting control stalk to return to
dipped beam headlamps.
Motor braking
reduction Flashing.
The main battery is fully charged, the motor
braking is temporarily reduced. Anticipate when you need to brake: use
the brake pedal to slow down or stop the
vehicle.
Ready
(ready to drive)
Fixed, accompanied by
an audible signal when
it comes on.The vehicle is ready to drive, you can
operate the accelerator now.
The lamp stays on as long as the vehicle is
powered up.
Green warning/indicator lamps
Black warning/indicator lamps Blue warning/indicator lamps
1
Dashboard instruments
Page 18 of 136
16
Lighting dimmer
System that allows the brightness of the
instruments and controls to be adjusted
manually to suit the ambient light level.
With the headlamps on or off, press button A to
select the function, then hold it down to adjust
the brightness of the instruments and controls
lighting to "day" or "night".
The brightness of the lighting increases every
time you press button A.
When the lighting reaches the maximum
setting, press again to move to the minimum
setting.
Release button A as soon as the lighting
reaches the desired brightness.
The setting is registered as soon as you
release button A and is stored when the ignition
switch is turned to OFF.
Service indicator
System which informs the driver when the
next ser vice is due, in accordance with the
manufacturer's servicing schedule.
This due date is calculated from the last reset
of the service indicator.
There are two different ways to indicate when
the next ser vice is due:
-
r
emaining distance (in kilometres or miles),
-
t
ime (in months) left before the next
service.
Once the ignition is switched on, press
button
A successively until the ser vice indicator
is displayed in the desired units.
Operation
1. The display shows the distance or time
remaining before the next service.
2. The display shows that the ser vice is due.
Each time the ignition is switched on, the
ser vice spanner is displayed for a few
seconds to notify you that the ser vice
must be carried out very soon.
3. Once the ser vice has been completed,
the distance or the time remaining before
the next ser vice is displayed.
Dashboard instruments
Page 42 of 136
40
Lighting control stalk
Main lighting
The various front and rear lamps of the vehicle
are designed to adapt the lighting gradually to
the climatic conditions and thus give the driver
better visibility:
-
s
idelamps, to be seen,
-
d
ipped beam headlamps to see without
dazzling other drivers,
-
m
ain beam headlamps to see clearly when
the road is clear.
Additional lighting
Other lamps are fitted to meet particular driving
conditions:
-
a r
ear foglamp to be seen from afar,
-
f
ront foglamps for even greater visibility,
-
d
aytime running lamps to be seen during
t h e d ay.
Selection ring for main
lighting mode
Turn it to align the desired symbol with the
mark.
Dipped or main beam headlamps.
Sidelamps.
Automatic illumination of headlamps.
Lighting off.
Headlamp dipping stalk
Pull the stalk to switch the lighting between
dipped/main beam headlamps.
In the lighting off and sidelamps modes, the
driver can switch on the main beam headlamps
temporarily ("headlamp flash") by maintaining a
pull on the stalk.
Displays
Illumination of the corresponding indicator
lamp in the instrument panel confirms that the
lighting selected is on.
Lighting and visibility
Page 43 of 136
41
Front and rear foglamps
Foglamps selection ring.
They operate with the sidelamps and dipped or
main beam headlamps.Front and rear foglamps:
F
T
urn the ring for wards once to switch on the
front foglamps.
F
T
urn the ring for wards twice to switch on the
rear foglamp.
F
T
urn the ring backwards once to switch off
the rear foglamp.
F
T
urn the ring backwards twice to switch off
the front foglamps. It is prohibited to switch on the front or
rear foglamps in fine weather or in rain,
night or day. In these situations, the power
of their beams may dazzle other drivers.
Do not forget to switch off the front
foglamps and the rear foglamp when they
are no longer necessary.
When lighting is left on
When the driver's door is opened, with the
ignition off, an audible signal warns the
driver that the vehicle's lighting is left on.
In this case, switching off the lighting
stops the audible signal.
Direction indicators
(flashing)The ring automatically returns to its initial
position.
The rear foglamp switches off automatically
when you switch off the sidelamps and dipped
or main beam headlamps.
F
L
eft: lower the lighting control stalk passing
the point of resistance.
F
R
ight: raise the lighting control stalk passing
the point of resistance.
Daytime running lamps
Specific daytime lighting to make the vehicle
more visible.
The daytime running lamps light up
automatically when the engine starts if no other
lamps are on.
They cannot be deactivated.
Although these lamps are located in the
same lamp unit as the front foglamps, they
operate with a specific bulb.
Their use complies with the Highway
Code.
4
Lighting and visibility
Page 44 of 136
42
Automatic illumination/
switching off of the headlamps
Automatic illumination
When the lighting control stalk ring is in
the AUTO position, the sidelamps and
dipped beam headlamps are switched on
automatically, without any action on the part of
the driver, when a low level of ambient light is
detected.
As soon as the level of light becomes sufficient
again, the lights are switched off automatically.
The sensor is located at the bottom of the
windscreen.
Do not cover the sunshine sensor, as the
associated functions would no longer be
controlled.
In fog or snow, the sunshine sensor may
detect sufficient light. The headlamps may
not come on automatically.
Automatic switching off
When the lighting control stalk is in the "AUTO"
position, if the ignition key is in the "LOCK" or
"ACC" position or is removed, the headlamps
will automatically switch off when the driver's
door is opened .
Headlamp beam height
adjustment
To avoid causing a nuisance to other road
users, the height of the halogen headlamp
beams must be adjusted according to the load
in the vehicle.
0.Driver only or driver + 1 front
passenger.
1 or 2. 4 passengers (including driver).
3. 4 passengers (including driver) +
maximum authorised load.
4. Driver + maximum authorised load.
The initial setting is position " 0".
Wiper control stalk
The wipers are controlled directly by the driver
using control A and ring B .
In wintry conditions, remove snow, ice
or frost present on the windscreen,
around the wiper arms and blades and
the windscreen seal before operating the
wipers.
Do not operate the wipers on a dry
windscreen. Under extremely hot or cold
conditions, ensure that the wiper blades
are not stuck to the windscreen before
operating the wipers.
Lighting and visibility
Page 97 of 136
95
Fitting a wheel
F Remove the bolts and store them in a clean place.
F
R
emove the wheel.
F
P
ut the wheel in place on the hub.
F
S
crew in the bolts by hand to the stop.
F
P
re-tighten the bolts using the wheelbrace. F
L ower the vehicle fully.
F
F
old the jack and detach it.
After changing a wheel
Have the tightness of the bolts and the
pressure of the new wheel checked by a
PEUGEOT dealer or a qualified workshop
without delay.
F
T
ighten the bolts using the wheelbrace.
Changing a bulb
The headlamps have polycarbonate
lenses with a protective coating:
F
d
o not clean them using a dr y or
abrasive cloth, nor with a detergent
or solvent product,
F
u
se a sponge and soapy water or a pH
neutral product,
F
w
hen using a high pressure washer
on persistent marks, do not keep the
lance directed towards the lamps or
their edges for too long, so as not to
damage their protective coating and
seals.
Changing a bulb must only be done after
the lamp has been switched off for several
minutes (risk of serious burns).
F
D
o not touch the bulb directly with your
fingers, use a lint-free cloth.
It is essential only to use anti-ultraviolet
(UV) type bulbs, so as not to damage the
lamp.
Always replace a failed bulb with a new
bulb with the same type and specification.
8
In the event of a breakdown
Page 98 of 136
96
Front lamps
1.Direction indicators (W21W – 21 W).
2. Sidelamps (W5W – 5
W).
3. Main beam headlamps (HB3 – 60
W).
4. Dipped beam headlamps (H11 – 55
W).
5. Front foglamps (H8 – 35
W).
6. Daytime running lamps (P13W – 13
W).
Access to bulbs
To replace a faulty bulb, you must first remove
the lamp unit.
To remove the lamp unit:
F
O
pen the bonnet.
F
P
ress tab A to release the connector. F
U
nscrew the mounting nut C until the head
of the nut touches the trim.
F
L
ift cover B with a screwdriver wrapped with
a cloth. F
R
emove the clips holding the bumper using
a screwdriver.
F
L
ift the bumper gently.
F
U
nscrew the mounting nut D while holding
the bumper aside.
F
U
nscrew the mounting nut E.
In the event of a breakdown
Page 99 of 136
97
Direction indicators
Amber coloured bulbs must be replaced
with bulbs of identical specification and
c o l o u r.
SidelampsMain beam headlamps
F Pull the lamp unit towards you and release
the tab F to remove it completely.
F
T
urn the bulb holder to the left and pull it
out.
F
P
ull out the bulb and replace it.
To refit, carry out these operations in reverse
o r d e r. F
T
urn the bulb holder to the left and pull it
out.
F
P
ull the bulb out and replace it.
To refit, carry out these operations in reverse
o r d e r. F
T urn the bulb holder to the left and pull it
out.
F
R
emove the bulb by pressing the tab.
F
R
eplace the bulb.
To refit, carry out these operations in reverse
o r d e r.
8
In the event of a breakdown