display Peugeot RCZ 2015 User Guide

24
RCZ_en_Chap01_controle-de-marche_ed01-2015
Service overdue
For a few seconds after the ignition is switched on, the spanner
flashes to indicate that the service must be carried out as soon as
possible.
Example: the service is overdue by 300 miles (300
km).
For a few seconds after the ignition is switched on, the central screen \
indicates:
The spanner remains on in the small screen
to indicate that a service should have been
carried out.
The distance remaining may be weighted by the time factor,
depending on the type of motoring the vehicle is used for.
Therefore, the spanner may also come on if you have exceeded
the
period since the last service specified in the manufacturer's
service schedule.
This indication applies only to HDi Diesel engines.
Service indicator reset
Retrieving the service information
You can access the service information at any time.
This information appears when running through the manual check
procedure.
F Briefly press the "CHECK/000" button.
The service information is displayed for a few seconds on the
instrument panel central screen, then disappears.
Following this operation, if you wish to disconnect the battery

,
lock the vehicle and wait at least five minutes for the reset to be
registered.
After each service, the service indicator must be reset.
If you have carried out the service on your vehicle yourself:
F

switch of
f the ignition,
F
press and hold the
"CHECK/000" button,
F

switch on the ignition; the distance recorder display begins a
countdown,
F

when the instrument panel central screen indicates
"=0"
, release
the button; the spanner disappears from the small screen.

25
RCZ_en_Chap01_controle-de-marche_ed01-2015
MANUAL CHECK
This function allows you to check the status of the vehicle (reminder o\
f
the active alert warnings) and the service information.
F With
the engine running, to start a manual check, briefly press the
"CHECK/000" button on the instrument panel.
If no faults have been detected,

"CHECK OK" appears in the
instrument panel central screen.
If a "minor" fault has been detected, the warning lamp concerned then
"CHECK OK" appear in the instrument panel central screen. Contact a
PEUGEOT


or a qualified workshop.
If a "major" fault has been detected, only the warning lamps concerned
appear in the instrument panel central screen. Have it checked by a
PEUGEOT


dealer or a qualified workshop.
dISTANCE RECORdERS
The total and trip distances are displayed for thirty seconds when the
ignition is switched off, when the driver's door is opened and when the
vehicle is locked or unlocked.
Measures the total distance travelled by the vehicle since its first
registration.
Total distance recorder
F With the ignition on, press and hold this button until zeros appear .
Trip distance recorder
Measures the distance travelled since it was last reset to zero by the
driver.
1/
MONITORING

27
RCZ_en_Chap01_controle-de-marche_ed01-2015
display of information
F Cycle through the information with successive short presses on this
button.
TRIP COMPUTER
CENTRAL INSTRUMENT PANEL SCREEN
C

ENTRAL

INSTRUMENT PANEL

SCREEN WITH
NA

VIGATION
System that gives you information on the current journey (range, fuel
consumption…).
1/
MONITORING

1
2
28
RCZ_en_Chap01_controle-de-marche_ed01-2015
The trip computer can display:-
The current information tab, for the trip in use, with:
●

the range,
● the
current fuel consumption.
-

The trip
"1" tab with:
● the
distance travelled,
● the
average fuel consumption,
● the
average speed.
-

The trip
"2" tab with:
● the
distance travelled,
● the
average fuel consumption,
● the
average speed.
F

Pressing the button again takes you to a black screen.
A

further press returns you to the normal display.Trip reset
F When the trip required is displayed, press this button.
T rips "1" and "2" are independent but their use is identical.
For example, trip "1"
can be used for daily figures, and trip
"2"
for
monthly
figures.

29
RCZ_en_Chap01_controle-de-marche_ed01-2015
TRIP COMPUTER , A FEW d EFINITIONS
Range
(miles or km)
The distance which can still be travelled with the fuel
remaining in the tank (related to the average fuel consumption over the\

last few miles (kilometres) travelled).
This value may vary following a change in the style of driving
or

the

relief, resulting in a significant change in the current fuel
consumption.
If dashes are displayed continuously while driving in place of the
digits,


contact a PEUGEOT

dealer or a qualified workshop.
This function is only displayed from 20 mph (30 km/h).
When the range falls below 20 miles (30 km), dashes are displayed.
After

filling

with at least 5 litres of fuel, the range is recalculated and is
displayed when it exceeds 60 miles (100 km).
Current fuel consumption
(mpg or l/100 km or km/l)
Calculated over the last few seconds.
Average fuel consumption
(mpg or l/100 km or km/l)
Calculated since the last trip computer reset.
Average speed
(mph or km/h)
Calculated since the last trip computer reset.
distance travelled
(miles or km)
Calculated since the last trip computer reset.
1/
MONITORING

30
RCZ_en_Chap01_controle-de-marche_ed01-2015
MONOCHROME SCREEN C (WITH
P EUGEOT
C
ONNECT
S
OUND (RD5))
dISPLAYS IN THE SCREEN
Displays according to context:
-
time,
-
date,
- ambient
temperature (the value displayed flashes if there is a risk of
ice),
-


visual parking assistance,
-


audio functions,
-


alert messages,
-

the display and vehicle equipment settings menus.
CONTROLS
From the control panel of your PEUGEOT Connect Sound (RD5), you
can:
F

press the
"MENU" button for access to the main menu,
F

press the "
5" or "6" buttons to scroll through the items on the
screen,
F

press the
"MO d E" button to change the permanent application
(audio source, telephone...),
F

press the "
7" or "8" buttons to change a setting value,
F

press the
"OK" button to confirm,
or
F

press the
"Back" button to abandon the operation in progress.

31
RCZ_en_Chap01_controle-de-marche_ed01-2015
MAIN MENU
F Press the "MENU" button to gain access to the main menu:
-
audio functions,
-


vehicle diagnostics,
-

personalisation-configuration,
-

telephone (Bluetooth system).
F


Press the "
5" or "6" buttons to select the menu required, then
confirm

by pressing the
"OK"
button.
"AUdIO FUNCTIONS" MENU
With the PEUGEOT Connect Sound (RD5) switched on, once this menu
has been selected you can activate or deactivate the functions linked
with use of the radio (RDS, REG, RadioText) or the CD (introscan,
shuffle, CD repeat).
For more information on the "Audio functions" application, refer to the \
"PEUGEOT


Connect Sound (RD5)" part of the "Audio equipment and
telematics" section.
"dIAGNOSIS VEHICLE" MENU
Once this menu has been selected, you can consult information
concerning the status of the vehicle.
Alert log
This summarises the active warning messages, displaying them in
succession on the multifunction screen.
F

On the "
d iagnosis vehicle" menu, select the following application:
F

Press the
"MENU" button to gain access to the main menu.
F

Press the arrows, then the
"OK" button to select the " d iagnosis
vehicle" menu.
1/
MONITORING

32
RCZ_en_Chap01_controle-de-marche_ed01-2015
* Depending on version.
** Depending on country of sale.
"PERSONALISATION-CONFIGURATION"
MENU
Once this menu has been selected, you can gain access to the
following functions:
- define the vehicle parameters,
- display
configuration,
-

choice of language.
define the vehicle parameters*
Once this menu has been selected, you can activate or deactivate the
following equipment:
-

selective unlocking (refer to the "Access" section),
-


guide-me-home lighting (refer to the "V
isibility" section),
-
interior mood lighting (refer to the "Ease of use and comfort" section)\
,
-


daytime running lamps** (refer to the "V
isibility" section),
-

rear parking sensors (refer to the "Driving" section). Example: setting of the duration of the guide-me-home lighting
F


Press the "
5" or "6" buttons, then the "OK" button to select the
menu required.
F
Press the "
5" or "6" buttons, then the "OK" button to select the
"Guide-me-home headlamps" line.
F
Press the "
7" or "8" buttons to set the value required (15, 30 or

60 seconds), then press the "OK"
button to confirm.
F Press the " 5" or "6" buttons, then the "OK" button to select the
"OK"
box and confirm or press the
"Back" button to cancel.

33
RCZ_en_Chap01_controle-de-marche_ed01-2015
With the PEUGEOT Connect Sound (RD5) switched on, once this menu
has been selected you can configure your Bluetooth hands-free system
(pairing), consult the various telephone directories (calls log, serv\
ices...)
and manage your communications (pick up, hang up, call waiting,
secret mode...).
For more information on the "T

elephone" application, refer to the
"PEUGEOT


Connect Sound (RD5)" part of the "Audio equipment and
telematics" section.
"TELEPHONE" MENUdisplay configuration
Once this menu has been selected, you have access to the following
settings:
-
brightness-video setting,
-


date and time setting,
-


choice of units.
Choice of language
Once this menu has been selected, you can change the language
used by the display (Deutsch, English, Espanol, Français, Italiano, \
Nederlands, Portugues, Portugues-Brasil, Türkçe**). As
a safety measure, configuration of the multifunction screen by
the driver must only be done when stationary

.
Setting the date and time
F
Press the "
7" or "8" button to display the "Display configuration"
menu, then the

"OK" button.
F
Press the "
5" or "6" button to select the "Adjust date and time"
line, then the "OK" button.
F
Press the "
7" or "8" button to select the setting to modify. Confirm
by pressing the
"OK"
button then modify the setting and confirm
again

to save the modification.
F Adjust the settings one by one, confirming with the
"OK"
button.
F
Press the "
5" or "6" button, then the "OK" button to select the
"OK" box and confirm, or the "Back"
button to cancel.
** According to country of sale.
1/
MONITORING

34
RCZ_en_Chap01_controle-de-marche_ed01-2015
RETRACTABLE COLOUR SCREEN (WITH
P EUGEOT
C
ONNECT
N
AVIGATION (RT6))
dISPLAYS IN THE SCREEN
Displays according to context:
-
time,
-
date,
-
altitude,
- ambient
temperature (the value displayed flashes if there is a risk of
ice),
-


visual parking sensor information,
-


audio functions,
-


telephone and contacts information,
-


satellite navigation system information,
-


alert messages,
-


menus for settings of the screen, navigation system and vehicle
equipment. From the

P EUGEOT
Connect Navigation (R
T6) control panel, to select
one of the applications:
F
press the dedicated
"RA
d IO", "MUSIC", "NAV", "TRAFFIC",
"PHONE" or "SETUP" button for access to the corresponding
menu,
F

turn dial
A to select a function, an item in a list,
F

press button
B to confirm the selection,


or
F

press the
"Back" button to abandon the current operation and
return to the previous display.
For more information on these applications, refer to the "P
EUGEOT

Connect

Navigation (RT6)" part in the "Audio equipment and telematics"
section.
CONTROLS
For operation of the retractable screen (opening, closing,
adjustment of the position, etc.), refer to the "Access to the
retractable screen" section.