tow PONTIAC VIBE 2009 User Guide

To lock and unlock your vehicle
from the outside, use your key or the
Remote Keyless Entry transmitter,
if equipped. SeeRemote Keyless
Entry (RKE) System Operation
on page 2-4for more information.
Open the driver door, on vehicles
with power door locks, by turning the
key in the lock toward the rear of
the vehicle.
Turn the key back toward the center
and toward the rear again, within
three seconds, to unlock all of
the doors. Use the key in the
passenger door to also unlock
all of the doors.
Lock a door by turning the key
toward the front of the vehicle.
If you have power door locks,
all the doors will lock.To manually lock or unlock the door
from the inside, move the lever
on the door forward or rearward.
The driver and front passenger door
open from the inside while locked.
With manual locks, the key must be
used to lock and unlock the liftgate.
Power Door Locks
On vehicles with this feature, the
power door lock switch is located on
the armrest of the driver and front
passenger door.
Q:Press to lock all the doors.
K:Press to unlock all the doors.
Rear Door Security Locks
Rear door security locks prevent
passengers from opening the
rear doors from the inside.
Open the rear doors to access the
security locks.
To set these locks, slide the lever
down on each door and close it.
The doors can only be opened from
outside with the door unlocked.
To return the doors to normal
operation, slide the lever up.
Keys, Doors and Windows 2-7
2009 - Pontiac Vibe Owner Manual

On vehicles with this feature, the
power windows only work when the
ignition is turned to ON/RUN or
in Retained Accessory Power
(RAP). SeeRetained Accessory
Power (RAP) on page 8-4.
Switches on the driver door control
the driver and passenger windows.
Each passenger door has a
switch to control that window.
Press or pull the front of a switch to
lower or raise a window.AUTO (Express-Down):Press all
the way down and release to lower
the driver window automatically.
Pull up at any time to stop the
window from lowering.
o(Lock-Out):Press the lock-out
button, located on the driver
door, to disable the passenger
power windows and again to
enable them.
Only the driver window can be
operated when the lock-out feature
is used.
Sun Visors
Pull the visor toward you or move it
to the side to help reduce glare.
To use the mirror, slide the attached
cover.
Mirrors
Manual Rearview Mirror
Adjust the mirror to see clearly
behind the vehicle. Hold the mirror
in the center to move it up, down,
and side to side. The day/night lever
lets you adjust the mirror to avoid
glare from headlamps behind
your vehicle. Move the lever to the
right for nighttime use and back
to the center for daytime use.
Vehicles with OnStar
®have three
control buttons located at the bottom
of the mirror. SeeOnStar
®System
on page 4-25for more information.
Keys, Doors and Windows 2-13
2009 - Pontiac Vibe Owner Manual

Outside Power Mirror(s)
The controls are located to
the left of the steering wheel
on the instrument panel.The vehicle must be in ON/RUN
or ACC/ACCESSORY to adjust
the mirrors.
1. Adjust either mirror by pushing
the selector switch to the L (left)
or R (right).
2. Use the arrows on the control
pad to adjust the direction of
the mirror.
3. Move the selector switch back to
the center. This locks the mirrors
in place.
Manually fold the mirrors inward
to prevent damage when going
through an automatic car wash.
To fold, push the mirror toward the
vehicle. Push the mirror outward,
to return to its original position.
Sunroof
On vehicles with a sunroof,
the controls are on the overhead
console. The ignition must be
in ON/RUN or Retained Accessory
Power (RAP) for the sunroof
to work.
TILT:Slide the sunshade back.
Press to tilt the sunroof. Press again
to stop movement at any time.
DOWN:Press to lower the sunroof.
SLIDE:Press to open the sunroof.
It express opens and stops
before the fully open position.
Press again to fully open. Press
the switch at any time to stop the
sunroof from moving. If the sunshade
is closed it opens with the sunroof.
2-14 Keys, Doors and Windows
2009 - Pontiac Vibe Owner Manual

Cargo Cover
For vehicles equipped with a cargo
cover.
Using the cargo cover:
1. Remove the cargo cover from its
storage location.
2. Unfold the cargo cover.
3. Attach the hooks to the indented
slots on the sides of the rear
cargo area.4. Attach the center hook to the
center head restraint.
{CAUTION
An improperly stored cargo cover
could be thrown about the vehicle
during a collision or sudden
maneuver. Someone could be
injured. If the cover is removed,
always store it in the proper
storage location. When it is
replaced, always be sure that
it is securely reattached.Folding the Cargo Cover:
1. Hold the cargo cover with
both hands.
2. Bend one side of the cover
toward the body.
3-4 Storage
2009 - Pontiac Vibe Owner Manual

Increasing Speed While Using
Cruise Control
There are three ways to increase
the vehicle speed:
Use the accelerator pedal to get
to the higher speed. Move the
lever down to−SET. Release the
lever and the accelerator pedal.
Move the cruise lever up
to +RES. Hold it there until the
desired speed is reached,
and then release the lever.
To increase the vehicle speed in
very small amounts, move the
lever to +RES briey and then
release it. Each time this is done,
the vehicle goes about 1 mph
(1.6 km/h) faster.Reducing Speed While Using
Cruise Control
There are two ways to reduce the
vehicle speed while using cruise
control:
Push and hold the lever to−SET
until the desired lower speed is
reached, then release it.
To slow down in very small
amounts, push the lever
down briey. Each time this
is done, the vehicle will go about
1 mph (1.6 km/h) slower.
Passing Another Vehicle While
Using Cruise Control
Use the accelerator pedal to
increase the vehicle speed.
When you take your foot off the
pedal, the vehicle slows down to
the cruise control speed set earlier.
Using Cruise Control on Hills
The cruise control performance will
vary depending upon the vehicle
speed, load, and the steepness of
the hills.When going up steep hills, you might
have to step on the accelerator pedal
to maintain the vehicle speed.
When going downhill, you might
have to brake or shift to a lower gear
to keep the vehicle speed down.
Applying the brake or downshifting
to 2 SECOND or L LOW turns
off the cruise control.
Ending Cruise Control
There are several ways to turn off
the cruise control:
Step on the brake pedal or push
the clutch pedal, if the vehicle
has a manual transmission.
Press the ON-OFF button.
Pull the cruise control lever
toward you.
Erasing Speed Memory
The cruise control set speed memory
is erased when the cruise control or
the ignition is turned off.
4-6 Instruments and Controls
2009 - Pontiac Vibe Owner Manual

Turn and Lane-Change
Signals
An arrow on the instrument panel
cluster ashes in the direction of the
turn or lane change.
Move the lever all the way up or
down to signal a turn.
Raise or lower the lever until the
arrow starts to ash to signal a lane
change. Hold it there until the
lane change is completed.
The lever returns to its starting
position whenever it is released.
If after signaling a turn or a
lane change the arrow ashes
rapidly or does not come on,
a signal bulb may be burned out.
Have the bulbs replaced. If the bulb
is not burned out, check the fuse.
SeeFuses and Circuit Breakers
on page 9-36.
Headlamp High/
Low-Beam Changer
The headlamps must be on for this
feature to work.
Push the turn signal lever away
from you to turn the high beams on.
This instrument panel cluster light
3comes on while the high beam
headlamps are on.
Pull the lever towards you to return
to low beams.
Flash-to-Pass
This feature is used to signal to the
vehicle ahead that you want to pass.
With the lever in the low-beam
position, pull the lever toward you to
momentarily switch to high-beams.
If the headlamps are on when the
lever is released, the high-beams will
return to low-beam.
Windshield Wipers
The windshield wiper/washer lever
is located on the right side of
the steering column.
Move the lever to one of the
following positions:
z(Mist):Move the lever to mist,
for a single wiping cycle and then
release. The wipers stop after
one wipe.
((Off):Move the lever to this
position to turn the wipers off.
Instruments and Controls 4-7
2009 - Pontiac Vibe Owner Manual

&(Intermittent):Move the lever
to choose a delayed wiping cycle.
For vehicles with the variable
intermittent feature, the time
between wipes can be adjusted.
Turn the
&band for a longer
or shorter delay interval.
q(Low):Use for steady wiping at
low speed.
l(High):Use for steady wiping at
high speed.
Clear snow and ice from the wiper
blades before using them. If the
blades are frozen to the windshield,
loosen or thaw them. If they
become damaged, get new blades
or blade inserts. SeeWindshield
Wiper Blade Replacement on
page 9-25.
Heavy snow or ice can overload the
wipers. A circuit breaker stops
them until the motor cools.
Windshield Washer
Pull the lever toward you to spray
washer uid on the windshield.
The spray continues until the lever
is released. The wipers will run
a few times. SeeWindshield Washer
Fluid on page 9-24for information
on lling the windshield washer uid
reservoir.
{CAUTION
In freezing weather, do not use
your washer until the windshield
is warmed. Otherwise the
washer uid can form ice on the
windshield, blocking your vision.
Rear Window
Wiper/Washer
Z
Rear Wiper:Turn the end of
the lever to low or high, to turn
on the rear window wiper.
y(Low):For steady rear wiping at
low speed.
x(High):For steady rear wiping
at high speed.
=(Rear Washer):Turn the end
of the lever up or down as far
as it will go, to squirt washer uid
on the rear window. The knob
automatically returns from these
positions after it is released.
The windshield washer reservoir is
used for the windshield and the
rear window. Check the uid level
in the reservoir if either washer
is not working. SeeWindshield
Washer Fluid on page 9-24.
4-8 Instruments and Controls
2009 - Pontiac Vibe Owner Manual

Brake System Warning
Light
The vehicle’s hydraulic brake
system is divided into two parts.
If one part is not working, the other
part can still work and stop the
vehicle. For good braking both parts
need to be working well.
If the warning light comes on, there
is a brake problem. Have the brake
system inspected right away.
If the vehicle has anti-lock brakes,
this light should come on when
the key is turned to START.If it does not come on, have it
xed so it will be ready to warn if
there is a problem.
When the ignition is on, the brake
system warning light also comes
on when the parking brake is
set. The light will stay on if the
parking brake does not fully release.
If it stays on after the parking
brake is fully released, it means
there is a brake problem.
{CAUTION
The brake system might not be
working properly if the brake
system warning light is on.
Driving with the brake system
warning light on can lead to a
crash. If the light is still on after the
vehicle has been pulled off the
road and carefully stopped, have
the vehicle towed for service.
See Antilock Brake System (ABS)
Warning Light later in this section
andTowing Your Vehicle on
page 9-75.
United States
Canada
Instruments and Controls 4-17
2009 - Pontiac Vibe Owner Manual

This light comes on during a
malfunction in one of two ways:
Light Flashing:A misre condition
has been detected. A misre
increases vehicle emissions and
could damage the emission control
system on the vehicle. Diagnosis
and service might be required.
The following can prevent more
serious damage to the vehicle:
Reduce vehicle speed.
Avoid hard accelerations.
Avoid steep uphill grades.
If towing a trailer, reduce the
amount of cargo being hauled
as soon as it is possible.
If the light continues to ash, when
it is safe to do so, stop the vehicle.
Find a safe place to park the
vehicle. Turn the key off, wait at
least 10 seconds, and restart
the engine. If the light is still
ashing, follow the previous steps
and see your dealer/retailer for
service as soon as possible.Light On Steady:An emission
control system malfunction has been
detected on the vehicle. Diagnosis
and service might be required.
An emission system malfunction
might be corrected by doing
the following:
Make sure the fuel cap is fully
installed. SeeFilling the Tank on
page 8-38. The diagnostic system
can determine if the fuel cap
has been left off or improperly
installed. A loose or missing fuel
cap allows fuel to evaporate into
the atmosphere. A few driving
trips with the cap properly
installed should turn the light off.
If the vehicle has been driven
through a deep puddle of water,
the vehicle’s electrical system
might be wet. The condition is
usually corrected when the
electrical system dries out.
A few driving trips should turn
the light off.
Make sure to fuel the vehicle with
quality fuel. Poor fuel quality
causes the engine not to run as
efficiently as designed and may
cause: stalling after start-up,
stalling when the vehicle is
changed into gear, misring,
hesitation on acceleration, or
stumbling on acceleration.
These conditions might go away
once the engine is warmed up.
If one or more of these conditions
occurs, change the fuel brand
used. It will require at least
one full tank of the proper fuel
to turn the light off.
SeeGasoline Octane on
page 8-36.
If none of the above have made the
light turn off, your dealer/retailer can
check the vehicle. The dealer/retailer
has the proper test equipment and
diagnostic tools to x any mechanical
or electrical problems that might
have developed.
Instruments and Controls 4-21
2009 - Pontiac Vibe Owner Manual

Climate Controls
Climate Controls
Climate Control System......7-1
Outlet Adjustment...............7-3
Passenger CompartmentAir Filter........................... .7-4
Climate Controls
Climate Control System
The heating, cooling, and ventilation for the vehicle can be controlled with
this system.
Fan Control
9(Fan):Turn the center knob
toward 4 to turn the system
on or increase fan speed. If the airow seems low when the
fan is at the highest setting, the
passenger compartment air lter
may need to be replaced. For more
information, see
Passenger
Compartment Air Filter on page 7-4
and Scheduled Maintenance on
page 11-4.
Climate Controls 7-1
2009 - Pontiac Vibe Owner Manual