light PORSCHE 911 CARRERA 2011 6.G Information Manual

3435
Which vital ingredients do you need to
experience moments of true happiness?
It ’s our conviction, at least, that you need
impressive road holding. Plus safety,
reliabilit y and faith in technology that won’t
let you down when you need it most.
Because only when we have peace of

mind are we truly free.
All these ingredients have been brought
together in the 911 Carrera 4S Cabriolet.
The car, powered by a 3.8 ­litre direct
fuel injection (DFI) engine with a maximum
output of 294 kW (400 hp) at 7,400 rpm,
sprints from 0 to 62 mph in 4.7 seconds
and boasts a top speed of 183 mph.
Strength | The new 911 Carrera 4S Cabriolet
The strength of identity can be measured after all.
In moments of happiness.

The new 911 Carrera 4S Cabriolet.
Bringing additional peace of mind are the
fuel consumption and CO
2 emissions fig ­
ures of the new 911 Carrera 4S Cabriolet,
which are up to 14 % lower than those of
the previous model.
The car’s ‘happiness hub’, however,
can be found in the Porsche Traction
Management (PTM) active all ­wheel ­drive
control system which has undergone
further refinement. As a result, handling
is even more poised and balanced,
particularly when the car is being driven
at its limits.
This makes controlling the
car even easier
and driving much more
pleasurable.
The hood of the new 911 Carrera 4S
Cabriolet lets you open up to the open
road. The fabric hood featuring magne­
sium elements is light weight, yet robust
and extremely rigid. It opens in just
13 seconds at road speeds of up to
31 mph. When closed, it shows off an
aerodynamically optimised silhouette
that has a drag coefficient of just 0.31.
Which is also why you can hear hardly
any wind noise.
You can certainly hear the engine though.
The sound is – and remains – unmistaka ­
bly Porsche. Likewise the dimensions: the car is 44 mm wider at the rear, has

a wide track and is equipped with wide
rear wheels on 20 ­inch Carrera S t yres.
All evidence of that strong identit y.
It’s possible, of course, to describe
moments of happiness. But it ’s far bet ter
to experience them first hand. The new
911 Carrera 4S Cabriolet.
For fuel consumption and CO
2 emissions, please refer to pages 139/141.

3839
Temperament
|
Engines
To give more and take less.
That’s Porsche engineering.

Engines.
You could ask whether the sports car is
still relevant. It would be a good question,
but you might as well ask the same of
dreams.
The answer to both questions lies in the
future or, to be more precise, in the future
of the sports car. In the 911, the future
is already here. The highly efficient, state ­
of­the ­art engines make a considerable
contribution to the comparatively low fuel
consumption, but their sound is still
unmistakably Porsche. The 911 engines are also unmistakably
sport y thanks to the SPORT but ton fit ted
as standard. At the push of a but ton, the
engine becomes tuned for a sharper
response and engine dynamics that are
even more direct.
The 3.4
­litre engine of the 911 Carrera
models demonstrates, therefore, that
performance and efficiency need not be
mutually exclusive. Rather, the downsized
engine capacity and increased maximum
torque are the intelli
gent basis by which
power output can be increased in an
environmentally acceptable and sustain­
able way. Fuel consumption and CO
2
emissions have been reduced by up to
16 % compared with the previous model. In their search for improved efficiency,
our engineers analysed an extensive series
of engine components. Answers were
found, including rapid heating of the
engine and gearbox to normal operating
temperature after an engine start by the
thermal management system, improved
air induction and extremely effective
direct fuel injection (DFI).
The same principle applies to the 3.8 ­litre
engine in the 911 Carrera S models.
There has been no change in displace ­
ment since the previous model, but
power output has been increased while
fuel consumption has been reduced by
up to 15 %. Weight is critical to efficiency. This is

why the engines have a light­alloy
construction, making them lightweight
and yet structurally rigid. The result
is comparatively low fuel consumption
and a long service life.
The engine is the intelligent core of our
identit y. What else could the ‘Dr. Ing.’ in
our company name possibly stand for?
For fuel consumption and CO
2 emissions, please refer to pages 139/141.

4243
A widely held belief about motorsport is
that power is the only thing that mat ters.
From experience, we know bet ter. Extra
horsepower alone has never been enough
to win a single race. Much more important
to us are ideas – ideas that inspire more
intelligent vehicle concepts and more
ef ficient drive systems. The same applies
on the road. It ’s about get ting the most
out of what you’ve got.
Auto start/stop function.
The auto start/stop function is standard
in the 911 Carrera models.
In cars with the manual gearbox, the
engine switches off automatically when,
for example, you stop at traffic lights,
select neutral and release the clutch
pedal. In cars with Porsche Doppelkupplung
(PDK), the engine switches off whenever
you stop and leave your foot on the
brake pedal.
All audio and communication systems
remain switched on and the climate con ­
trol continues to maintain your selected
temperature. The only differences you
will notice are the silence at the rear and
the fuel saving. As soon as you operate
the clutch or release the brake, the
engine will restart swiftly and smoothly. The auto start/stop function may remain
inactive under particular circumstances,
for example: extreme outside tempera
­
tures, when the SPORT but ton is selected
or if bat tery charge is low. It is also pos ­
sible to deactivate the function manually
using a separate but ton on the centre
console.
Thermal management.
The thermal management system
regulates the temperature in the engine
and gearbox through the intelligent
manipulation of heat flow.
In this way, the engine and gearbox reach
their optimum operating temperature
sooner. As a result, fuel consumption is
reduced through increased combustion
efficiency and lubrication performance.

Electrical system recuperation.
The 911 Carrera models are also equipped
as standard with fuel ­saving electrical
system recuperation technology. The
vehicle bat tery is recharged by the alter ­
nator, predominantly under braking.
Under acceleration, on the other hand,
the power draw of the alternator is limited
to increase the engine output available
for driving. The electrical systems are
supplied by the electrical energy stored
during the recharging process.
Temperament | Engines
Not as thirsty as you might think.

Efficiency- enhancing measures.
For fuel consumption and CO2 emissions, please refer to pages 139/141.

4647
Temperament
|
Engines
Integrated dry-sump lubrication.
Integrated dr y ­sump lubrication ensures
a reliable supply of oil even when a
sport y driving st yle is adopted. It also
has additional cooling functions.
The oil tank is located in the engine,
thereby eliminating the need for an
external oil tank, which saves both space
and weight. To reduce power loss and
increase efficiency, an electronically
controlled oil pump supplies the lubricat ­
ing points inside the engine as and
when required. When demand is low, the
oil pump is operated at reduced power,
thereby saving fuel.
Air intake system.
The resonance intake system increases
the intake volume by exploiting the fact
that air oscillates as it passes through
the intake manifold. The system can
adjust to engine speed. Benefits of this
include higher torque at low engine
speeds and a flat ter torque curve.
The
9 11 Carrera S models operate a t wo ­
stage
system.
The entire intake system is made from
light weight plastic. In the 9 11 Carrera
model range, the resonator volume of
the air filter housing varies with engine
speed to bring added character to the
engine sound, which becomes much
more powerful at higher rpm.
Exhaust system.
The exhaust system of the 911 Carrera
models has been redesigned, acoustics
included.
The stainless ­steel exhaust system com ­
prises t wo distinctive and independent
exhaust tracts. The cataly tic converters
heat up rapidly for effective emissions
reduction.
A selectable t win ­tube sports exhaust
system featuring distinctive polished
stainless ­steel tailpipes is available as an
option. Activated by a but ton, it produces
an even more intensive sports car sound.
Engine management system.
The EMS SDI 9.1 engine management
system ensures optimum engine perfor ­
mance at all times. It controls, for
example, the position of the electronic
throt tle valve (ETC) – a prerequisite for
compati bility with the Porsche Stability
Management (PSM), which comes as
standard. It also regulates all engine ­
related functions to achieve optimum
fuel consumption, emissions and power
output whatever the driving st yle.
Another function is the cylinder ­specific
knock control. Since the cylinders never
all work under exactly the same condi ­
tions, the knock control function monitors
each one separately. The ignition point
is shifted individually, as and when
necessary, to protect the cylinders and
pistons at high engine speeds.
For compliance with EU standards, the
on ­board diagnostics detect any faults
and defects that may occur in the exhaust
and fuel systems and then notify the
driver immediately. This also prevents
increased pollutant emissions and
unnecessary fuel consumption.
Twin tailpipe of the sports exhaust system Single
­tube tailpipe on the 911 Carrera
Twin ­tube tailpipe on the 911 Carrera S
For fuel consumption and CO2 emissions, please refer to pages 139/141.

5657
Temperament

| Chassis and body
Engineered design.
The innovative bodyshell of the 911 fulfils
t wo structural design requirements: first,
excellent driving dynamics due to the
body’s extremely high rigidit y; second,
a vehicle weight saving of up to 65 kg
primarily as a result of the intelligent
lightweight construction. To meet the second requirement, we
employed state
­of­ the ­art techniques for
combining various materials in order
to utilise specific material properties
exactly where they are needed.
For the bodyshell, therefore, we used
very thin, but nevertheless extremely
rigid, sheets of steel. Aluminium and magnesium were used extensively in
areas such as the roof, underbody, front
end, doors, rear wings and engine com
­
partment and luggage compartment lids.
Magnesium, which is a particularly light ­
weight material, was also selected for
the cockpit and centre console support
beam and, in the Cabriolet models,
the hood shell elements. Such material efficiency is key to reducing the overall
weight and, as a result, fuel consumption
of the vehicle.
For the driver, this intelligent blend

of materials reduces the weight of the
vehicle and offers a high level of comfort
thanks to excellent vibration ­damping
characteristics and particularly high com ­
posite rigidit y, an increase in dynamic
torsional stiffness of up to 25 % compared
with that of the previous model, and
even
sportier handling despite a further
improvement in the weight to power ratio.
The longer wheelbase improves comfort
as well as straight ­line accuracy and
driving stabilit y at high speeds and in
fast corners.

Front and rear axles.
The independent suspension at the front
features a light weight spring ­strut axle
with longitudinal and transverse links and
cross members that have been refined
for stiffness. Each front wheel is precisely
located, ensuring excellent directional stability, superior handling and reduced
pitching under braking, and the wide
track optimises turn
­in.
The rear axle is equipped with a
motorsport ­derived multi ­link suspension
and chassis subframe. Refined axle
kinematics for improved longitudinal
damping reduce acceleration squat and increase comfort. Light weight spring
struts further enhance agilit y.
The high proportion of aluminium used in
the construction of the axles reduces the
weight of the vehicle and of the unsprung masses, helping to improve fuel economy,
comfort and agility.
Rear axle of the 911 Carrera S
Front axle of the 911 Carrera S
Aluminium
Deep
­drawn steels
Multiphase steels
Super ­high ­strength micro ­alloyed steels
Boron ­alloyed steels

5859
T
emperament
| Chassis and body
Hood.
Our engineers have completely redeveloped
the hood for the 911 Carrera Cabriolet
models. The result is a flexible roof
comprising a glass rear screen and three
individual and integral hood elements,
which are manufactured from magnesium
and covered in fabric. This makes the
hood highly robust and, yet, particularly
lightweight.
Another benefit is that the hood is
smooth and firm. The fabric remains taut
keeping the familiar 911 lines elegant.
A trivialit y? Only if you choose to ignore
the impressively low drag coefficient
of just 0.30 for the 911 Carrera Cabriolet
models. A further feat of Porsche
engineering.
The rear screen is made from glass and
is electrically heated and scratch ­resistant to provide excellent rearward
visibilit y. A rain channel on the hood

carries away water to avoid dripping
when the doors are opened.
Electrically powered, the hood is operat ­
ed using a but ton on the centre console
or via the key remote. It opens or closes
in approximately 13 seconds and remains
operable up to a speed of 31 mph.
The concertina action ensures optimum
protection for the interior lining. The interior hood lining is made from

a heat ­insulating and sound ­absorbing
material. Consistent interior temperatures
and an effective suppression of wind
noise are the perceptible results. Thank ­
fully, however, even the hood’s sound ­
proofing properties are no match for
the resonant Porsche sound.
Open, flexible, independent.
The optimum prerequisites for a long-term relationship.

Cabriolet technology.

7071
Wheels.
The 911 Carrera models are equipped
with 19­inch Carrera wheels as standard.
These are light weight alloys featuring a
classic sport y design. Tyre sizes are
235/40 ZR 19 and 285/35 ZR 19 at the
front and rear, respectively. All ­wheel ­
drive models are fit ted with even wider
295/35 ZR 19 t yres at the rear. The S models are equipped with light
­
alloy 20­inch Carrera S wheels as
standard. The visual effect is sport y and
dynamic. The t yres are slightly wider
to cope with the increased power output
of these models: 245/35 ZR 20 at the
front, 295/30 ZR 20 at the rear. All ­wheel ­
drive models have 305/30 ZR 20 t yres
at the rear.
The large t yre size improves both ride
comfort and track performance. Rolling
resistance, dry braking distances and t yre
weight are all comparatively low, thereby
helping to reduce fuel consumption.
A selection of 20 ­inch wheels is available
in our range of options.Tyre Pressure Monitoring (TPM).
Tyre Pressure Monitoring (TPM) is avail­
able on request. This safet y system sends
warnings to the on ­board computer’s
display screen in the event of low t yre
pressure or a gradual or sudden loss
of pressure. The individual pressures
in all four t yres can be displayed in the
instrument cluster.
Porsche Stability Management (PSM).
As standard, the 911 Carrera models are
equipped with enhanced Porsche Stability
Management (PSM), which maintains sta ­
bilit y even at the limits of dynamic driving
performance. Sensors continuously moni ­
tor the direction, speed, yaw velocit y and
lateral acceleration of the car. Using this
information, PSM is able to calculate the actual direction of travel at any given
moment. If the car begins to oversteer or
understeer, PSM applies selective braking
on individual wheels to restore stabilit y.
Under acceleration on wet or low ­grip
road surfaces, PSM improves traction
using the automatic brake differential
(ABD) and anti ­slip regulation (ASR).
When the SPORT PLUS mode of the
optional Sport Chrono Package is selected,
the PSM threshold is raised to allow a
sportier driving st yle.
For an even more dynamic experience,
you always have the option to deactivate
PSM. It is automatically reactivated,
for your safet y, only if you brake harder
and either of the front wheels (in SPORT
PLUS mode, both of the front wheels) requires ABS assistance. ABS and ABD,
however, remain active at all times.
PSM therefore offers a high level of

driving stability and safety combined
with extraordinary agilit y. It ’s an
apparent contradiction in terms, but an
intrinsic part of the Porsche identit y.
19 ­inch Carrera wheel (standard on the 911 Carrera
models)
20­inch Carrera S wheel (standard on the 911 S models)911 Carrera 4 Cabriolet with 20 ­inch Carrera Classic wheels
Temperament | Chassis and body
For fuel consumption and CO2 emissions, please refer to pages 139/141.

7677
Composure
| Safet y
Control, discipline, precision.

At Porsche, we take driving pleasure very seriously.

S a f e t y.
Brakes.
Another crucial piece of the Porsche
identit y is the brakes. We value them as
highly as we do our engines and chassis.
They set standards for deceleration and
stabilit y, and give the driver the reassur ­
ance needed to push the car to the limits
of its performance.
The 911 Carrera base models are fit ted
front and rear with anodised black four ­
piston aluminium monobloc fixed calipers.
All brake discs have a diameter of 330 mm.
On the S models, we have fit ted larger
brakes and more brake pistons to cope
with the higher engine power of these
models. Consequently, they feature red
six­piston monobloc aluminium fixed
brake calipers at the front and four ­piston
aluminium monobloc fixed calipers at
the rear. The brake disc diameter is
340 mm at the front and 330 mm at the
rear. The results are enhanced braking
performance and stability.
On all models, the brake calipers have
an enclosed monobloc construction.
This makes them tougher but lighter and enables a more rapid response and
release of the brake even under extreme
loads. The pedal travel is short and

the biting point precise. The brake discs
are cross ­drilled for better performance
in the wet.
Other benefits of the standard braking
system include the anti ­lock braking
system (ABS), designed to keep deceler ­
ation constant. Pedal effort is reduced
and braking response improved by an
8 ­/9 ­inch tandem vacuum brake booster.
In the S models, brake disc cooling is
further enhanced by modified air spoilers.
Standard brake system on the 911 Carrera models
Standard brake system on the 911 Carrera S models

7879
From the start, Porsche has been
synonymous with motorsport. Ever since
1948, when we found our identit y on
the racetrack, we have taken the experi ­
ence we have gained and applied it to
the road. The optional Porsche Ceramic
Composite Brake (PCCB) is a fine example.
This brake system has already had to
cope with the harshest requirements of
Composure | Safet y
motor racing and is fit ted in cars that
compete in demanding events such as
the Porsche Mobil 1 Supercup.
The cross ­drilled PCCB ceramic brake
discs for the 911 Carrera have a diame ­
ter of 350 mm front and rear for even
more formidable braking performance. What we’ve discovered from over 30,000 racing victories:
Brake later, finish sooner.

Porsche Ceramic Composite Brake (PCCB).The use of six ­piston aluminium monobloc
brake calipers on the front axle and four ­
piston units at the rear – all finished in
yellow – ensures extremely high brake
forces which, crucially, are exceptionally
consistent.
PCCB enables shorter braking distances
in even the toughest road and race
conditions. Excellent fade resistance
ensures greater balance when slowing
from racetrack speeds.
The key advantage of PCCB is the
extremely low weight of the ceramic
brake discs, which are approximately
50 % lighter than standard discs of similar
design and size. As well as enhancing performance and fuel economy, this

represents a major reduction in unsprung
and rotating masses. The consequence
of this is bet ter road holding and
increased comfort, particularly on uneven
roads, as well as greater agilit y and
improved handling.
Please note that circuit racing, track
day use and other forms of performance
driving can significantly reduce the
service life of even the most durable
brake pads and discs.
As with conventional high ­performance
braking systems, we recommend that
all brake components be professionally
inspected and replaced where necessary
after every track event.
For fuel consumption and CO
2 emissions, please refer to pages 139/141.

8081
Composure
| Safet y
Electric parking brake.
The electric parking brake, which you
can activate and deactivate manually,
releases automatically as you pull away.
With the hill
­hold function, you can
pull away without ever rolling back.
The system automatically detects when
the vehicle has come to a halt on an
uphill gradient requiring intervention.
PSM then maintains the brake pressure
at all four wheels to prevent the vehicle
from moving in the opposite direction.
Airbags.
The 911 Carrera models offer advanced
airbag technology in the form of full ­size
driver and front passenger airbags, which
are inflated in t wo stages depending
on the severit y and t ype of accident (e.g.
frontal or offset frontal). In less serious
accidents, the airbags are only partially
inflated, thereby minimising discomfort
to the occupants. In addition to the central airbag control
unit on the transmission tunnel, a pair

of impact sensors are located near the
headlights. This allows a crash to be
detected and evaluated far sooner and
with considerably greater accuracy.
Porsche Side Impact Protection
System (POSIP).
Coupé or Cabriolet, the 911 models are
equipped as standard with the Porsche
Side Impact Protection System (POSIP).
It comprises side impact protection ele ­
ments in the doors and t wo airbags on each side. An integral thorax
airbag is
located in each seat side bolster,
while
the door panels each contain an upwards ­
inflating head airbag. Each thorax airbag
has a volume of 10 litres and each head
airbag 15 litres, ensuring excellent pro ­
tection in the event of a side impact.
Cabriolet roll-over protection concept.
Despite their low weight, the 911 Carrera
Cabriolet models have exemplary torsional
rigidit y and flexural strength. Body flexing
is minimal, even on the most poorly sur ­
faced roads.
Increased protection is provided by an
automatically deploying roll ­over protec ­
tion system if the car were to overturn.
Two spring ­loaded roll ­over bars are
neatly incorporated behind the rear
seats. The roll ­over sensor continuously
monitors the car’s pitch and roll, contact
with the road, as well as lateral and
longitudinal forces. If the car were to
overturn, the roll ­over bars would be
deployed instantly.