bulb PORSCHE CAYNNE TURBO 2006 1.G Owners Manual
[x] Cancel search | Manufacturer: PORSCHE, Model Year: 2006, Model line: CAYENNE TURBO, Model: PORSCHE CAYENNE TURBO 2006 1.GPages: 387, PDF Size: 8.44 MB
Page 123 of 387
Controls, Safety, Instruments
123
Check left cornering light Check bulb.
Check right cornering light Check bulb.
Check low beam Check bulb.
Check trailer lights Check bulb.
Check direction indicatorsCheck turn signal bulb.
Check brake lights Check bulb.
Check high beam Check bulb.
Check number plate light Check bulb.
Check fog lights Check bulb.
Check reversing lights Check bulb.
Check tail lights Check bulb.
Check front side lights Check bulb.
Check headlight beam adjustment Have the fault remedied at an authorized Porsche dealer.
Daytime driving lights off Daytime driving lights switch off when the engine is shut off.
Switch on lights if necessary.
Airbag faulty Have the fault remedied at an authorized Porsche dealer.
Passenger airbag switched onAdvanced Airbag - displays when the passenger's airbag
switches on or displays for approx. 10 seconds with the passen-
ger's airbag switched on after switching on the ignition
Instrument
panelMulti-purpose
displayText display Meaning/measures
Page 283 of 387
Practical Tips, Minor Repairs
283 Practical Tips, Minor Repairs
Exercise Extreme Caution when Working on your
Vehicle ...................................................... 284
Notes on Minor Repairs .............................. 285
Tires/Wheels ............................................. 285
Jack .......................................................... 299
Tool Kit ..................................................... 299
Lifting the Vehicle with a Lifting Platform or
Garage lift ................................................. 300
Compressor .............................................. 301
Wheel Bolts ............................................... 301
Spacers .................................................... 302
Changing Wheels........................................ 303
Flat Tire ..................................................... 304
Electrical System ....................................... 322
Battery ...................................................... 332
Emergency Starting with Jumper Cables ...... 343
Replacing the remote control battery ........... 346
Bulb Chart ................................................. 347
Replacing Bulbs ......................................... 348
Headlights ................................................. 349
Tail Light ................................................... 355
License Plate Lights................................... 357
Headlight Adjustment.................................. 358
Changing Headlights from Left to Right-Hand
Traffic ....................................................... 359
Towing ...................................................... 360
Page 347 of 387
Practical Tips, Minor Repairs
347
Bulb ChartExterior lights Type, rating Interior lights Type, rating
Xenon low beam and high beam D1S Interior light, front W5W
Side marker light, rear P21/5W Reading light W5W
Side marker light, front W5W Footwell light W3W
Turn signal light, rear P21W Glove compartment light W3W
Turn signal light, front PY21W Center console W3W
Brake light P21W Luggage compartment light K12V10W
License plate light C5W Curb lights (doors) W3W
Fog light H11 Warning lights (doors) W3W
Rear fog light P21/4W Kerb light (rear lid) W5W
Back up light P21W Curb lights (rear lid) W5W
Side indicator light W5W
Additional high beam H7
Cornering light H3
Page 348 of 387
348
Practical Tips, Minor Repairs
Replacing Bulbs
Warning!
Danger of short circuit.
fAlways switch off the relevant consumer when
changing bulbs.
Danger of injury. The headlights are under
high voltage when installed.
fExercise extreme caution when working in the
area of the headlights.
Risk of damage. Bulbs of a higher wattage
can damage the light housing.
fOnly use the bulbs specified in the bulb chart.
fBulbs must be clean and free from oil, grease
or fingerprints.
fNever touch bulbs with your bare hands.
Use a cloth or soft paper when replacing bulbs.
fAlways carry spare bulbs with you.
In certain countries, the carrying of spare
bulbs is mandatory.
Caution!
Risk of damage to headlights due to exces-
sive temperatures and abrasion.
fAttach no coverings (e.g. films, “stone
guards“) in the area of the headlights.
fUse soapy water only to clean light lenses and
plastic headlight lenses. In no case may chem-
ical cleaners or other volatile cleaning fluids be
used.
fTo prevent scratches, do not rub with a dry or merely moist cloth, tissue or insect sponges.
Page 351 of 387
Practical Tips, Minor Repairs
351
Location of bulbs in Bi-Xenon headlightsBi-Xenon headlight
F Bulb for turn signal
G Bulb for additional high beam
H Bulb for cornering light
I Bulb for front side marker light
J Xenon gas discharge lamp for low beam and
high beam
Opening the lid of the headlight housing1. Open both clips A.
2. Remove housing lid B.
Closing lid of headlight housing1. Put housing lid B on and press into place.
2. Close clips A.
Page 352 of 387
352
Practical Tips, Minor Repairs
Changing the gas discharge lamp1. Pull off plug J.
2. Unclip securing clip G.
3. Pull off holder H.
4. Replace defective bulb.
Note on operation
fMake sure the bulb is installed in the correct
position.
Reassemble in reverse order.
Changing bulb for cornering light1. Pull plug off the bulb (arrow).
2. Unclip securing clip I.
3. Replace defective bulb.
Note on operation
fMake sure the bulb is installed in the correct
position.
4. Reassemble in reverse order.Changing bulb for front side marker light
1. Pull the bulb holder out of lamp bracket
(arrow).
Page 353 of 387
Practical Tips, Minor Repairs
353
2. Pull bulb out of the holder (arrow).
3. Replace defective bulb.
4. Reassemble in reverse order.Changing additional high beam light
1. Remove cover G.2. Pull plug J off the bulb.
3. Unclip securing clip H.
4. Pull bulb I out.
5. Replace defective bulb.
Note on operation
fMake sure the bulb is installed in the correct
position.
6. Reassemble in reverse order.
Page 354 of 387
354
Practical Tips, Minor Repairs
Changing turn signal bulb1. Turn bulb holder in the headlight housing anti-
clockwise and pull it out.2. Remove bulb from the holder (bayonet lock):
Push bulb into the holder and twist in the
direction of the arrow.
3. Replace defective bulb.
4. Insert bulb holder into the headlight housing
and turn it clockwise until it engages.
Page 356 of 387
356
Practical Tips, Minor Repairs 3. Screw in the fastening screws B.
4. Press in caps A.
Replacing bulbs1. Undo fastening screws C of the housing cover.
2. Remove housing cover D.
E- Tail light
F- Reversing light
G- Turn signal light
H- Brake light
I- Rear fog light and tail light3. Replace defective bulb.
4. Insert lamp bracket.
5. Install tail light.
Page 357 of 387
Practical Tips, Minor Repairs
357
License Plate LightsChanging bulb for license plate light1. Unscrew both screws A and remove the light.
2. Push the bulb holder apart and pull the bulb
out.
3. Replace defective bulb.
4. Reassemble in reverse order.