mileage RENAULT MEGANE COUPE 2015 X95 / 3.G Owners Manual

RENAULT MEGANE COUPE 2015 X95 / 3.G Owners Manual MEGANE COUPE 2015 X95 / 3.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1602/w960_1602-0.png RENAULT MEGANE COUPE 2015 X95 / 3.G Owners Manual

Page 68 of 268

RENAULT MEGANE COUPE 2015 X95 / 3.G Owners Manual 1.62
Trip computer and warning 
system 1
Depending on the vehicle, this includes 
the following functions:
– distance travelled;
– journey parameters;
– information messages;
– operating fault

Page 69 of 268

RENAULT MEGANE COUPE 2015 X95 / 3.G Owners Manual 1.63
Trip mileage resetting
With “trip mileage recorder” selected on 
the display, press button 2 or 3 until the 
mileage recorder resets to zero.
Resetting the journey 
parameters (reset button)

Page 70 of 268

RENAULT MEGANE COUPE 2015 X95 / 3.G Owners Manual 1.64
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT \
AND COUNTRY.
Examples of selectionsInterpreting the display selected
101668 KM   112. 4 KM
a) Total mileage and trip mile

Page 72 of 268

RENAULT MEGANE COUPE 2015 X95 / 3.G Owners Manual 1.66
ON-BOARD COMPUTER: trip settings (3/6)
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT \
AND COUNTRY.
Examples of selectionsInterpreting the display selected
On-board comp

Page 73 of 268

RENAULT MEGANE COUPE 2015 X95 / 3.G Owners Manual 1.67
ON-BOARD COMPUTER: trip settings (4/6)
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT \
AND COUNTRY.
Examples of selectionsInterpreting the display selected
On-board comp

Page 96 of 268

RENAULT MEGANE COUPE 2015 X95 / 3.G Owners Manual 2.2
RUNNING IN
Petrol version
For the first 600 miles (1,000 km), do 
not exceed 78 mph (130 km/h) in the 
highest gear, or 3,000 to 3,500 rpm.
You may only expect top performance 
from your vehicle a

Page 263 of 268

RENAULT MEGANE COUPE 2015 X95 / 3.G Owners Manual 7.3
ALPHABETICAL INDEX (3/5)
heating system ........................................................3.4 → 3.10
hill descent control .................................................2.24  → 2.27
Hi