battery replacement RENAULT SCENIC 2011 J95 / 3.G Air Bag ACU4 - Seat Belt Pretensioners Workshop Manual

AIRBAG - SEAT BELT PRETENSIONERS
Fault finding - Introduction
88C
88C - 5V3 MR-372-J84-88C000$010.mif
AIRBAG ACU4
Vdiag: 04
All faults requiring replacement of a computer for thorough fault finding with the appropriate tools. The diagnostic
sheet must be filled out during the process and indicate the findings for the warranty refund.
6. SAFETY INSTRUCTIONS
All work on components requires obeying safety rules to prevent physical damage or human injury:
– Make sure the battery is properly charged to avoid damaging the computers with a low charge.
During operations on the airbag/seat belt pretensioner systems it is vital that you lock the computer using
the diagnostic tool to prevent any risk of accidental triggering (all the ignition lines will be inhibited). The
locked mode is signalled when the Instrument panel warning light comes on.
If it is impossible to connect the fault-finding tool, switch off the ignition, remove the system power fuse,
and wait at least 2 seconds for the reserve power capacity to discharge.
Never measure the airbag or pretensioner trigger lines with any device other than XRBAG or CLIP's "Airbag
and pretensioner wiring harness check".
Before using a dummy ignition module, ensure that its resistance is between 1.8 and 2.5 ohms.
While working, make sure the computer power supply does not drop below 10 V. WARNING!
5. FAULT FINDING LOG
WARNING:
A properly documented diagnostic sheet is required for all monitored part (computer-type)
reimbursements or Techline calls.
IT IS THEREFORE COMPULSORY TO FILL OUT A FAULT FINDING SHEET EVERY
TIME
A FAULT FINDING OPERATION IS PERFORMED.
WARNING
Airbag and pretensioner destruction and disposal is subject to national legislation.
ACU4 Vdiag04 J84 1.0