brake RENAULT TWINGO 2009 2.G Chasiss Workshop Manual

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual TWINGO 2009 2.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1719/w960_1719-0.png RENAULT TWINGO 2009 2.G Chasiss Workshop Manual

Page 2 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual TWINGO - Chapitre 3
Contents
Pages
TWINGO - Chapitre 3ContentsPages
30A GENERAL INFORMATION
Brake circuit: Operating 
diagram 30A-1
Brake circuit: Precautions for 
the repair 30A-2
Braking circuit: Bl

Page 3 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual Contents
Radiator mounting cross 
member: Removal - Refitting 31A-51
Front anti-roll bar: Removal - 
Refitting 31A-52
33A REAR AXLE COMPONENTS
Rear brake pads: Removal - 
Refitting 33A-1
Rear brake

Page 4 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual Contents
37A MECHANICAL COMPONENT CONTROLS
Master cylinder: Removal - 
Refitting 37A-1
Brake servo non-return 
valve: Removal - Refitting 37A-11
Brake servo: Remo val - 
Refitting 37A-14
Vacuum pum

Page 5 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 30A-1
GENERAL INFORMATION
Brake circuit: Operating diagram
30A
 « X  » braking system with ABS
3877
IMPORTANT
This is a diagram of the general principle, do not
use it as a reference for take-off po

Page 6 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 30A-2
GENERAL INFORMATION
Brake circuit: Precautions for the repair
30A
I - SAFETY
1 -  Advice to be followed before any operation
For an operation requiring the use of a lift, follow the
safety advic

Page 7 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 30A-3
GENERAL INFORMATION
Brake circuit: Precautions for the repair
30A
Parts identification:
-shape of steel or copper pipe end piece (A),
-shape of connecting points on components (B),
-shape of uni

Page 8 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 30A-4
GENERAL INFORMATION
Braking circuit: Bleed
30A
This procedure must be applied after one of the fol-
lowing components has been removed or replaced:
-the master cylinder,
-the brake fluid,
-the h

Page 9 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 30A-5
GENERAL INFORMATION
Braking circuit: Bleed
30A
aConnect the brake circuit bleeding device (after
having received Renault approval) to the master cyl-
inder reservoir (see the instructions for th

Page 10 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 30A-6
GENERAL INFORMATION
Brake circuit: Tightening torque
30A
I - FRONT BRAKES
EQ UIPMENT LEVEL SPORT
146250
No. Description Tightening torque (N.m)
 (1)  Calliper bleed screw10
 (2)  Guide pin bolts

Page 11 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 30A-7
GENERAL INFORMATION
Brake circuit: Tightening torque
30A
EQUIPMENT LEVEL EA0 or EQUIPMENT LEVEL
EA1 or EQUIPMENT LEVEL EA3 or EQUIPMENT
LEVEL EA5 or EQUIPMENT LEVEL EAG  or
EQUIPMENT LEVEL EZ2 o
Page:   1-10 11-20 21-30 31-40 41-50 ... 170 next >