fuel tank removal RENAULT TWINGO 2009 2.G Chasiss Workshop Manual

37A-75
MECHANICAL COMPONENT CONTROLS
Parking brake cables: Removal - Refitting
EQ UIPMENT LEVEL EA0 or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA5
or EQUIPMENT LEVEL EAG or EQUIPMENT LEVEL EZ2 or EQUIPMENT LEVEL EZ4
37A
aDetach the parking brake cables at (7) and (8) .
aUnclip the end of the parking brake cables at (9) .
aUnclip the cable sleeve stops at (10) and remove the
parking brake cables from the rear drum flanges.aPass the parking brake cables into the guides (11)
and remove the parking brake cables.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aFit the parking brake cables by passing them into the
guides (11) and rear brake drum flanges.
aAttach the end of the parking brake cables to the
rear brake pads.
aClip on the cable sleeve stops.
aAttach the cables to the fuel tank.
aFit the cables to the compensator.
aRefit the compensator nut.
II - FINAL OPERATION.
aAdjust the parking brake lever (see 37A, Mechani-
cal component controls, Parking brake lever:
Adjustment, page 37A-48) .
aRefit:
-the heat shield,
-the rear brake drums (see 33A, Rear axle compo-
nents, Rear brake drum: Removal - Refitting,
page 33A-19) ,
-the rear wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
121329
121331
121330