warning RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual TWINGO RS 2009 2.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1719/w960_1719-0.png RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual

Page 6 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 30A-2
GENERAL INFORMATION
Brake circuit: Precautions for the repair
30A
I - SAFETY
1 -  Advice to be followed before any operation
For an operation requiring the use of a lift, follow the
safety advic

Page 8 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 30A-4
GENERAL INFORMATION
Braking circuit: Bleed
30A
This procedure must be applied after one of the fol-
lowing components has been removed or replaced:
-the master cylinder,
-the brake fluid,
-the h

Page 17 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 30A-13
GENERAL INFORMATION
Rigid brake pipe: Repair
30A
This procedure applies to copper pipes diameter 4.7
mm.
REPAIR
I - PIPE PREPARATION OPERATION
a
aCut the pipe to the recommended length using a

Page 20 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 30A-16
GENERAL INFORMATION
Rigid brake pipe: Repair
30A
a
aShape the pipe using a bender, curve after curve,
while respecting the original shape of the pipe.
128814
WARNING
To avoid weakening the pipe

Page 21 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 30A-17
GENERAL INFORMATION
Rigid brake pipe: Repair
30A
V - CHECKING BENDING
aCheck the out-of-roundness of the outer diameter at 
the centre of the curve radius (2) using a sliding cal-
liper (the ou

Page 35 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 30A-31
GENERAL INFORMATION
Front axle assembly: Adjustment values
30A
I - WHEEL ALIGNMENT: MEANING OF SYMBOLS
Toe-out: minus sign
Toe-in: plus signII -  WHEEL ALIGNMENT
WARNING
Symbols used by RENAULT

Page 42 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 30A-38
GENERAL INFORMATION
Rear axle assembly: Adjustment values
30A
I - WHEEL ALIGNMENT: MEANING OF SYMBOLS
II -  WHEEL ALIGNMENT
III - CAMBER WARNING
Symbols used by RENAULT:
-toe-out: -
-toe-in: +

Page 45 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 31A-2
FRONT AXLE COMPONENTS
Front brake pads: Removal - Refitting
EQ UIPMENT LEVEL EA0 or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA5
or EQUIPMENT LEVEL EAG or EQUIPMENT LEVEL EZ

Page 46 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 31A-3
FRONT AXLE COMPONENTS
Front brake pads: Removal - Refitting
EQ UIPMENT LEVEL SPORT
31A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and

Page 48 of 281

RENAULT TWINGO RS 2009 2.G Chasiss Workshop Manual 31A-5
FRONT AXLE COMPONENTS
Front brake pads: Removal - Refitting
EQ UIPMENT LEVEL SPORT
31A
II -  REFITTING OPERATION
aFit the inner brake pad with the lugs (4) in the calliper
piston.
aRefit:
-the o
Page:   1-10 11-20 21-30 31-40 41-50 ... 70 next >