change language SKODA OCTAVIA TOUR 2010 2.G / (1Z) SymphonyCD Car Radio Manual

Radio5
First of all the unit attempts to set only alternative frequencies of the selected
station.
If the quality is however so low, that there is a risk of a “program loss”, the unit also
accepts “related” frequencies.
When opting for REG AUTO the change to a regional “related” station can only be
performed if there is a risk of losing the station. When selecting REG OFF, the
receiver can access the regional “related” stations unlimited.
M/S
This function makes it possible that with the aid of the RDS signal, you can automat-
ically switch between an optimal pl ay function for music and language.
PHONE IN*
If your vehicle is equipped with a handsfree system, you can switch on or off the
monophone play function of the mobile phone calls via the loudspeakers of the
vehicle.
PH VOL*
Set the volume for the play function of the telephone calls.
TA VOL
Set the volume for the play functi on of the traffic announcements.
CD SFL
If you select CD SFL D, the tracks on a CD are replayed in random order. If you select
CD SFL M , the tracks in the complete magazine of the external CD changer* are
played in random order.
KEY
If you select KEY ON, the radio switches off after withdrawing the ignition key. If you
select KEY OFF , the radio can only be switched on or off with the control button .
LO U D
In case of low volume level, the function reinforces the range of bass and treble
frequencies. MONO
When the reception is bad it switches over to mono operation.
LO C
If you select
LO C O N, only stations with the stro ngest reception are considered
during station finding. If you select LO C O F F, stations with weak reception are also
considered during station finding.
Radio modeWaveband switch-overYour radio is fitted with the wavebands FM1/AM1 and FM2/AM2, in order to
change, press the button for some considerable time.The process of searching for and storing the radio stationsManual search
– Set the frequency of the desired radio station by pressing the rocker switch or .
Automatic station finding SEEK
– The radio searches for the next radi o station in the selected waveband
by pressing the button or .
Function SCAN
– The radio stations of the current waveband are briefly played (for 10
seconds) by pressing the button .
– This function is ended by pressing the button once again and the current station is replayed.
A1
A/F



SCN
SCN
s1tk.book Page 5 Thursday, March 20, 2008 1:56 PM