rims SKODA RAPID SPACEBACK 2014 1.G User Guide

›Remove the fire extinguisher.›For mounting, fit the fire extinguisher back into the holder and secure it with
straps.
Please read carefully the instructions which are attached to the fire extin-
guisher.
The fire extinguisher must be checked by an authorised person once a year.
The national legal requirements must be observed.WARNINGThe fire extinguisher must always be secured safely so that they do not
come loose when making an emergency braking or in a vehicle collision
which could cause injuries to occupants.
Note
■ The fire extinguisher must comply with national legal requirements.■Pay attention to the expiration date of the fire extinguisher. Proper function-
ing of the fire extinguisher is not assured once it has passed its expiry date.■
The fire extinguisher is part of the scope of delivery in certain countries only.
Vehicle tool kit
Fig. 138
Vehicle tool kit
The vehicle tool kit is housed in a box in the spare wheel or in the storage
space for the spare wheel.
Depending on the equipment, not all the components listed in the on-board
tool kit have to be contained in it.
Screwdriver
Spanner for removing and installing the tail light
Adapter for anti-theft wheel bolts
Towing eyelet
Clamps for removing the wheel trims
Depending upon vehicle equipment: Jack with sign / puncture repair kit
Wheel wrench
Extraction pliers for wheel bolt caps
Replacement bulb setWARNINGThe factory-supplied lifting jack is only intended for your model of vehicle.
Under no circumstances attempt to lift heavier vehicles or other loads.
CAUTION
■ Screw the jack back into the starting position before storing in the box with
the tool kit.■
Ensure that the vehicle tool kit is safely secured in the boot.
■
Ensure that the box is always secured with the strap.
Note
The declaration of conformity is included with the jack or the log folder.
Reserve and temporary spare wheel
 Introduction
This chapter contains information on the following subjects:
Remove / store wheel
160
Spare wheel
160
When using an emergency or spare wheel make sure to mount a wheel with
the appropriate dimensions and design as soon as possible.
After changing the spare wheel, the tyre pressure should be adjusted. In vehi- cles with tyre pressure monitoring, tyre pressure values are to be stor-
ed » page 119 . 
123456789159Emergency equipment and self-help

Raising the vehicle163Anti-theft wheel bolts164
For your own safety and the safety of the passengers, the following instruc-
tions must be observed before changing a wheel on the road.
Switch on the hazard warning lights system.
The warning triangle is to be set up at the prescribed distance - observe
the national legal provisions when doing so.
Park the vehicle as far away as possible from the flow of traffic.
Choose a location with a flat, solid surface.
Have all the occupants get out. The passengers should not stand on the
road (instead they should remain behind a crash barrier, for instance) while
the wheel is being changed.
The following instructions must be followed if the vehicle is subsequently fit- ted with tyres or rims that differ from the factory-fitted ones » page 155, Ex-
planation of the tyre labelling .
The national legal requirements must be observed when changing a wheel.
Preliminary work
Before changing the wheel, the following work must be carried out.
›
Switch off the engine.
›
Select the first gear or move the selector lever for the automatic gearbox
into position P .
›
Firmly apply the handbrake.
›
Uncouple any trailers.
›
Remove the vehicle tool kit » page 159 and the spare wheel » page 159 from
the boot.
Full wheel trim
Before removing the wheel bolts, remove the wheel cover.
Removing
›
Hook the clamp found in the vehicle tool kit » page 159into the reinforced
edge of the wheel trim.
›
Push the wheel wrench through the clamp, support on the tyre and pull off
the wheel trim.
Installing›Press the wheel trim onto the wheel rim at the designated valve open-
ing » .
›
Then press the trim into the wheel rim until its entire circumference locks
correctly in place.
CAUTION
Notes from the factory or from the ŠKODA Original accessory delivered trim..■When using an anti-theft wheel bolt, make sure that this has been fitted ac-
cording to the position marked on the back of the wheel cover position.■
On the back of the wheel cover, the position for the anti-theft wheel bolt is
marked by means of a symbol. If the wheel cover is set outside the position
marked for the anti-theft wheel bolt, there is a risk of damaging the wheel
cover.
CAUTION
■ Use the pressure of your hand only, do not strike the full wheel trim! The
cover could be damaged.■
If wheel trims are fitted, an adequate flow of air must be assured in order to
cool the brake system.
Note
We recommend that you use wheel trims from ŠKODA Original Accessories.
Wheel bolts
Fig. 140
Remove the cap
Before removing the wheel bolts, remove the covering caps.
Removing
›
Push the extraction pliers » page 159sufficiently far onto the cap until the in-
ner catches of the pliers are positioned at the collar of the cap.
›
Remove the cap in the direction of the arrow » Fig. 140. 
161Emergency equipment and self-help

DimensionsFig. 171
Principle sketch: Vehicle dimensions
Vehicle dimensions for operating weight without driver (in mm)
» Fig. 171SpecificationValueAHeightBasic dimension1459/1471 a)Vehicles with an off-road package.1472/1484 a)B
Front track
Basic dimension1457For vehicles fitted with the 1.2 l/55 kW MPI and 1.2 l/63 kW TSI engines and 14"
wheel rims.1463CWidth1706D
Rear track
Basic dimension1494For vehicles fitted with the 1.2 l/55 kW MPI and 1.2 l/63 kW TSI engines and 14"
wheel rims.1500EWidth including exterior mirror1940FClearanceBasic dimension134Vehicles with an off-road package.141GWheel base2602HLength4304a)
Valid for vehicles with the Amundsen+ navigation system.
183Technical data

Lower position86
Parking position87
Removing86
Upper position85
Vehicle battery Automatic load deactivation
151
charging150
Checking the battery electrolyte level150
Cover149
Operation in winter150
Replacing151
Safety instructions148
vehicle care chrome parts
133
Vehicle care Alcantara
137
Artificial leather137
Cavity protection135
Cleaning vehicle exterior132
Cleaning wheels135
Decorative films134
Door locking cylinder135
Headlight glasses134
Interior care136
Maintenance133
Materials137
Natural leather136
Plastic parts133
Polishing vehicle paint work133
Rubber seals133
Safety belt138
Seat covers138
Under-body protections135
washing131
Vehicle Condition see Auto Check Control
33
Vehicle data sticker181
Vehicle data sticker and nameplate Vehicle data sticker and nameplate
181
Vehicle dimensions183
Vehicle height183
Vehicle Identification Number (VIN)181
Vehicle length183
Vehicle tool kit159
Vehicle width183
Vest Placement of the reflective vest
158
VIN Vehicle Identification Number
181
Visibility64
Visors See front sun visors
65
W
Warning at excessive speeds
46
Warning triangle158
Washing Automatic car wash system
132
by hand131
High-pressure cleaner132
Washing vehicles131
Waste container77
Water Driving through
111
Weather conditions128
Wheel bolts Anti-theft wheel bolts
164
Caps161
Loosening and tightening162
Wheel rims152
wheels spare wheel
160
Wheels Age of wheels
152
Changing160
Driving style153
Full trim161
General information152
Load index155
Snow chains157
Speed symbol155
Storage of wheels152
Tyre damage154
Tyre pressure153
Tyre size155
Tyre wear153
Tyre wear indicator154
Unidirectional tyres155
Wheel balance153
Wheels exchange154
Winter tyres157
Wi-Fi Password
102, 103
Settings102
Website102
Window Interior mirror
67
Window wiper Replacing the rear window wiper blade
172
Windscreen washer fluid Checking
143
Replenishing143
Warning light40
Winter143
Windscreen washer system143
Windscreen wipers66
Windscreen wipers Activating
66
Replacing the windscreen wipers172
Windscreen washer fluid143
Windscreen wipers and washers65
Winter operation156
De-icing windows134
Snow chains157
Winter tyres157
Winter tyres See Wheels
157
Wiper blades136
Service position of the windscreen wiper arms 172
197Index