SSANGYONG RODIUS 2005 User Guide
RODIUS 2005
SSANGYONG
SSANGYONG
https://www.carmanualsonline.info/img/67/57522/w960_57522-0.png
SSANGYONG RODIUS 2005 User Guide
Page 301 of 502
01-3
FUSE AND RELAY
RODIUS 2005.07
8410-05
8410-05FUSES AND RELAYS
1. ENGINE COMPARTMENT FUSE AND RELAY
BOX
Fuse and relay box is located in the engine compartment, and the interior fuse box is located
under the driver side instrument panel. Especially, ICM box, an integrated circuit of relays, is
mounted along with STICS behind the driver side instrument panel.
Connector arrangement
Back of the fuse and relay box
(after removal)
Fuses and relays
Page 302 of 502
01-4
RODIUS 2005.07
8410-05
FUSE AND RELAY
1) Arrangement of Fuses and Relays
2) Descriptions of Fuses and Relays
Page 303 of 502
01-5
FUSE AND RELAY
RODIUS 2005.07
8410-05
2. INTERIOR FUSE COMPARTMENT
The interior fuse box is located in the lower area of driver side instrument panel.
To check the fuses, open the driver side door and remove the fuse box cover. ·
·
Page 304 of 502
01-6
RODIUS 2005.07
8410-05
FUSE AND RELAY
3. ICM(INTEGRATED CONTROL MODULE) BOX
COMPARTMENT
The ICM box is installed along with RK STICS on the bracket behind the Instrument panel
undercover.
It contains an integrated module with around 14 relays according to the vehicle model. Relays
in the module are installed on the integrated circuit with a safety circuit. This system operates
with small current (by using transistor) and minimizes the sparks that occur during operations
(connection/disconnection) of relays; therefore its durability and wear resistance has been
greatly increased compared to the conventional relays.
Relays in the ICM box cannot be replaced respectively; so when the internal components
(including relay) are defective, ICM box should be replaced as an assembly.
RK STICS
ICM box
Page 305 of 502
01-7
FUSE AND RELAY
RODIUS 2005.07
8410-05
1) Printed Circuit Board Arrangement of ICM Box
The figure shows the internal arrangement of ICM box when the cover is removed and then
disassembled.
The relays cannot be disassembled and replaced respectively; so the ICM box should be
replaced as an assembly when any internal components are defective.
(1) Front view
Page 306 of 502
01-8
RODIUS 2005.07
8410-05
FUSE AND RELAY
(2) Rear view
Page 307 of 502
01-9
FUSE AND RELAY
RODIUS 2005.07
8410-05
4. WIRING HARNESS, CONNECTOR & GROUND
LOCATION
1) W/H Engine room
Page 308 of 502
01-10
RODIUS 2005.07
8410-05
FUSE AND RELAY
2) W/H Main
Page 309 of 502
01-11
FUSE AND RELAY
RODIUS 2005.07
8410-05
3) W/H Floor (LH)
Page 310 of 502
01-12
RODIUS 2005.07
8410-05
FUSE AND RELAY
4) W/H Floor (RH)