wheel SUBARU IMPREZA 2000 2.G Repair Manual

10-42
HG0124
Lock pin
2. Grasp the wheel c over with b oth hand s b y the sp ok es and twist
sharp ly in a clockwise d irec tion until you feel the d etent loc king . After
twisting the wheel c over, make sure the wheel c over is loc ked
sec urely b y lig htly turning the wheel c over rig ht a nd left.
HG0126
NOTE When any of the wheels is removed and replaced for tire rotation or to change a flat tire, always check the tightness of the wheelnuts after driving approximately 600 miles (1,000 km). If any nut isloose, tighten it to the specified torque.

Maintenance and service10-43
–
CONTINUED –

Wheel covers (Regular type wheel covers)
n Removing the wheel cover
HGA012BA
Insert the wheel c over remover into the notc h p rovi d ed , and p ry the
wheel c over off. n Installing the wheel cover
HGA013BA
Alig n the valve with the valve hole in the c over, t hen fit the c over on
the wheel b y tap p ing your hand evenly around the c i rc umferenc e of
the c over. NOTE When any of the wheels is removed and replaced for tire rotation or to change a flat tire, always check the tightness of the wheelnuts after driving approximately 600 miles (1,000 km). If any nut isloose, tighten it to the specified torque.

10-44Aluminum wheels (if equipped)
Aluminum wheels c an b e sc ratc hed and d amag ed easily
. Hand le them
c arefully to maintain their ap p earanc e, p erformanc e , and safety.
When any of the wheels is removed and rep lac ed for tire rotation or to
c hang e a flat, always c hec k the tig htness of the wh eel nuts after d riving
ap p roximately 600 miles (1,000 km). If any nut is l oose, tig hten it to the
sp ec ified torq ue. Never ap p ly oil to the thread ed p arts, wheel nuts, or tap ered surfac e
of the wheel. Never let the wheel rub ag ainst sharp p rotrusions o r c urb s.
Be sure to fit tire c hains on uniformly and c omp let ely around the tire,
otherwise the c hains may sc ratc h the wheel. When wheel nuts, b alanc e weig hts, or the c enter c ap are rep lac ed ,
b e sure to rep lac e them with g enuine SUBARU p arts d esig ned for alumi-
num wheels. Fuses
HG0127
HS0202
The fuses are d esig ned to melt d uring an overload t o p revent d amag e to
the wiring harness and elec tric al eq uip ment. The fu ses are loc ated in
two fuse b oxes.
If any lig hts, ac c essories or other elec tric al c ont rols d o not op erate, in-
sp ec t the c orresp ond ing fuse. If a fuse has b lown, rep lac e it.

11-2Specifications
These sp ec ific ations are sub jec t to c hang e without
notic e.
Dimensions
Overall leng th 172.2 in. (4,375 mm)
Overall wid th 67.1 in. (1,705 mm)
Overall heig ht 56.3 in. (1,430 mm)* 1
55.5 in. (1,410 mm)
Ground c learanc e 6.5 in. (165 mm)* 1
5.7 in. (145 mm)
Front tread 57.5 in. (1,460 mm), 57.9 in. (1,470 mm)*2
Rear tread 57.1 in. (1,450 mm), 57.5 in. (1,460 mm)*2
Wheelb ase 99.2 in. (2,520 mm)
* 1
: OUTBACK
* 2
: RS
Maximum load limits
Gross vehic le weig ht rating See the c ertific ation la b el attac hed
Gross axle weig ht rating to the d river ’s d oor jamb .
Engine
2500 c c Eng ine mod el EJ251
Eng ine typ e Horizontally op p osed , liq uid c ooled 4 c ylind er,
4 stroke g asoline eng ine
Eng ine d isp lac ement 149.9 c u in (2,457 c c )
Bore 3.92 in. (99.5 mm)
Stroke 3.11 in. (79.0 mm)
Comp ression ratio 10.0 : 1
Firing ord er 1 – 3 – 2 – 4

11-4Transmission oil (AWD) 3.7 US q t (3.5 liter, 3.1 Im
p q t)
Automatic transmission fluid 8.9 US q t (8.4 liter, 7.4 Imp q t)
AT d ifferential g ear oil 1.3 US q t (1.2 liter, 1.1 I mp q t)
AWD rear d ifferential g ear oil 0.8 US q t (0.8 liter, 0.7 Imp q t)
Power steering fluid 0.7 US q t (0.7 liter, 0.6 Imp q t)
Eng ine c oolant 6.2 US q t (5.8 liter, 5.2 Imp q t)
Tires
Typ e Steel b elted rad ial, Tub eless
Size Front and rear P195/60R15 P205/60R15*3
P205/55R16* 2
Sp are T135/70D16
Pressure Front 32 p si (2.2 kg /c m 2
, 220 kp a)
Rear 29 p si (2.0 kg /c m 2
, 200 kp a)
Sp are 60 p si (4.2 kg /c m 2
, 420 kp a)
Wheel size Front and rear 16 x 7JJ* 2
15 x 6JJ
Sp are 16 x 4T
Wheel alig nment Toe Front 0 0.12 in. (0 3 mm)
Rear 0 0.12 in. (0 3 mm)
Camb er Front –0 *4
, –0 25 ’* 5
Rear –0 55 ’, –1 10 ’* 2
* 2
: RS
* 3
: OUTBACK
* 4
: 2.2 liter
* 5
: 2.5 liter

Consumer information and Reporting safety defects12-3
–
CONTINUED –

Temperature A, B, C
The temp erature g rad es are A (hig hest), B and C, re p resenting the tire’s
resistanc e to g eneration of heat and its ab ility to d issip ate heat when
tested und er c ontrolled c ond itions on a sp ec ified i nd oor lab oratory test
wheel. Sustained hig h temp erature c an c ause the mat erial of the tire to
d eg enerate and red uc e tire life, and exc essive temp erature c an lead to
sud d en tire failure. Grad e C c orresp ond s to a level of p erformanc e
whic h all p asseng er c ar tires must meet und er the F ed eral Motor Vehic le
Safety Stand ard s No. 109. Grad es B and A rep resent hig her levels of
p erformanc e on the lab oratory test wheel than the m inimum req uired b y
law.
WARNING
The temperature grade for a tire is established for one that is
properly inflated and not overloaded. Excessive speed, under
inflation or excessive loading, either separately or in combina-tion, can cause heat buildup and possible tire failure.