oil additives TOYOTA AVENSIS 2003 Service Repair Manual

ST0741
Grease
A62228
CutoutProtrusion
A30137
ST0728
±
STARTING & CHARGING STARTER ASSY (1ZZ±FE/3ZZ±FE)
19±7
1ZZ±FE,3ZZ±FE ENGINE REPAIR MANUAL
(RM923E)
(f) Apply grease to the drive lever touching the starter pivot
part of the drive lever.
(g) Install the drive lever to the starter clutch.
(h) Align the protrusion of the shock absorber with the cutout of the starter housing and install them.
13. INSTALL STARTER ARMATURE ASSY
(a) Install the starter armature to the starter yoke. 14. INSTALL STARTER BRUSH HOLDER ASSY
(a) Install the brush holder.
(b) Using a screwdriver, hold the brush spring back, and con-nect the brush into the brush holder.
Connect the 4 brushes.
(c) Apply turbine oil with additives to the bearing of the end frame.
(d) Install the end frame with 2 new screws. Torque: 1.5 N
m (15 kgf
cm, 13 in.
lbf)
NOTICE:
To avoid interference between the brush holder and the
dust protector push the commutator and frame away at an
angle.
http://vnx.su