tires TOYOTA AVENSIS 2003 Service User Guide
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2003, Model line: AVENSIS, Model: TOYOTA AVENSIS 2003Pages: 2234, PDF Size: 56.95 MB
Page 1405 of 2234

H42762
Tires
(5 or more)
SST(s)
H42763
SST(s)
H42764
Battery
SST(s)
10 m (33 ft) or more
±
SUPPLEMENTAL RESTRAINT SYSTEM CURTAIN SHIELD AIR BAG ASSY LH
60±45
AVENSIS REPAIR MANUAL (RM1018E)
(f) Place the tires.
CAUTION:
Do not place the deployment direction of the curtain shield
airbag assy LH facing toward the ground.
(1) Place at least 2 tires under the tire to which the cur-tain shield airbag assy LH is tied.
(2) Place at least 2 tires over the tire to which the curtain
shield airbag assy is tied. The top tire should have
the wheel installed.
NOTICE:
Do not place the SST(s) connector under the tire because
the SST connector could be damaged.
(3) Tie the tires together with 2 wire harnesses.
CAUTION:
Make sure that the wire harness is tight. It is highly danger-
ous when looseness in the wire harness results in the tires
coming free due to the shock from the airbag deployment.
HINT:
Place the SST(s) connector and the wire harness inside tires.
Secure at least 1 m (3 ft) of slack for the wire harness.
(g) Install the SST(s). Connect one SST(s) connector to the SST(s) connector
connected to the curtain shield airbag.
SST 09082±00700
NOTICE:
To avoid damaging the SST(s) connector and wire harness,
do not lock the secondary lock of the twin lock. Also, se-
cure some slack for the SST(s) wire harness inside the tire.
(h) Deploy the airbag. (1) Connect the red clip of the SST(s) to the batterypositive (+) terminal and the black clip of the SST(s)
to the battery negative (±) terminal.
(2) Check that no one is within a 10 m (33 ft) radius of
the tire to which the curtain shield airbag assy LH is
tied.
(3) Press the activation switch of the SST(s) and deploy the airbag.
HINT:
The airbag deploys as the LED of the SST(s) activation switch
comes on.
http://vnx.su
Page 1411 of 2234

H42898
Tires
(5 or More)
SST(s)
H42763
SST(s)
H43006
Front Seat
Airbag Assy
SST(s)
10 m (33ft) or more
Battery
±
SUPPLEMENTAL RESTRAINT SYSTEM FRONT SEAT AIRBAG ASSY LH
60±51
AVENSIS REPAIR MANUAL (RM1018E)
(e) Place the tires.
(1) Place at least 2 tires under the tire to which the frontseat airbag assy LH is tied.
(2) Place at least 2 tires over the tire to which the front seat airbag assy LH is tied. The top tire should have
the disc wheel installed.
NOTICE:
Do not place the SST(s) connector under the tire because
the SST(s) connector could be damaged.
(3) Tie the tires together with 2 wire harnesses.
CAUTION:
Make sure that the wire harness is tight. It is highly danger-
ous when looseness in the wire harness results in the tires
coming free due to the shock from the airbag deployment.
HINT:
Place the SST(s) connector and the wire harness inside tires.
Secure at least 1 m (3 ft) of slack for the wire harness.
(f) Install the SST(s).
Connect the connector of the SST(s).
SST 09082±00700
NOTICE:
To avoid damaging the SST(s) connector and wire harness,
do not lock the secondary lock of the twin lock. Also, se-
cure some slack for the SST(s) wire harness inside the tire.
(g) Deploy the airbag. (1) Connect the red clip of the SST(s) to the battery
positive (+) terminal and the black clip of the SST(s)
to the battery negative (±) terminal.
(2) Check that no one is within a 10 m (33 ft) radius of the tire to which the front seat airbag assy LH is tied.
(3) Press the activation switch of the SST(s) and
deploy the airbag.
HINT:
The airbag is deployed as the LED of the SST(s) activation
switch comes on.
http://vnx.su
Page 1421 of 2234

H4263210 m (33 ft) or moreBattery
SST(s)
H42633Weight
X
Y
Y
H40013
Inner Diam.
Tires
(3 or More) Width
60±24
±
SUPPLEMENTAL RESTRAINT SYSTEM HORN BUTTON ASSY
AVENSIS REPAIR MANUAL (RM1018E)
(2) Move the SST(s) to at least 10 m (33 ft) away from the horn button assy tied down to the disc wheel.
(e) Cover the horn button assy with a cardboard box or tires.
Covering method using a cardboard box:
Cover the horn button assy with the cardboard box
and weigh the cardboard box down in 4 places with
at least 190 N (20 kg, 44 lb).
Size of cardboard box:
Must exceed the following dimensions:
X = 460 mm (18.11 in.)
Y = 650 mm (25.59 in.)
NOTICE:
When the dimension Y of the cardboard box exceeds
the diameter of the disc wheel with tire to which the
horn button assy is tied, X should be the following
size.
X = 460 mm (18.11 in.) + width of tire
If a cardboard box smaller than the specified size is
used, the cardboard box will be broken by the shock
from the airbag deployment.
Covering method using tires:
Place at least 3 tires with no disc wheels on top of
the tire with disc wheel to which the horn button assy
is tied.
Tire size: Must exceed the following dimensions
Width: 185 mm (7.28 in.)
Inner diameter: 360 mm (14.17 in.)
CAUTION:
Do not use tires with disc wheels.
NOTICE:
The tires may be marked by the airbag deployment,
so use a redundant tires.
Do not place the SST(s) connector under the tire be-
cause the SST(s) connector could be damaged.
http://vnx.su
Page 1429 of 2234

H43258
SST(s)
H42668
Tires
(5 or more)
SST(s)
H42763
SST(s)
H4266910 m (33 ft) or more
SST(s)
Battery
Instrument Panel
Airbag Assy
±
SUPPLEMENTAL RESTRAINT SYSTEM INSTRUMENT PANEL AIR BAG ASSY
60±59
AVENSIS REPAIR MANUAL (RM1018E)
(e) Install the SST(s).
Connect the connector of the SST(s) to the instrument
panel airbag assy.
SST 09082±00770
(f) Place the tires. (1) Place at least 2 tires under the tire to which the
instrument panel airbag assy is tied.
(2) Place at least 2 tires over the tire to which the instru- ment panel airbag assy is tied. The top tire should
have the disc wheel installed.
NOTICE:
Do not place the SST(s) connector under the tire because
the SST(s) connector could be damaged.
(3) Tie the tires together with 2 wire harnesses.
CAUTION:
Make sure that the wire harness is tight. It is highly danger-
ous when looseness in the wire harness results in the tires
coming free due to the shock from the airbag deployment.
(g) Install the SST(s). Connect the connectors of the SST(s).
SST 09082±00700, 09082±00802 (09082±10801, 09082±20801)
NOTICE:
To avoid damaging the SST(s) connector and wire harness,
do not lock the secondary lock of the twin lock. Also, se-
cure some slack for the SST(s) wire harness inside the tire.
(h) Deploy the airbag. (1) Connect the red clip of the SST(s) to the batterypositive (+) terminal and the black clip of the SST(s)
to the battery negative (±) terminal.
(2) Check that no one is within a 10 m (33 ft) radius of
the tire to which the instrument panel airbag assy
lower No.1 is tied.
(3) Press the activation switch of the SST(s) and deploy the airbag.
HINT:
The airbag is deployed as the LED of the SST(s) activation
switch comes on.
http://vnx.su
Page 1437 of 2234

H42646
Inner
Diam.WidthTire
H43004
SST(s)
H42647
Tires
(5 or more)
60±34
±
SUPPLEMENTAL RESTRAINT SYSTEM INSTRUMENT PANEL PASSENGER AIR BAG ASSY
AVENSIS REPAIR MANUAL (RM1018E)
NOTICE:
The tire will be marked by the airbag deployment, so use a
redundant tire.
(d) Install the SST(s). Connect the connector of the SST(s) to the instrument
panel passenger airbag assy.
SST 09082±00780
(e) Place tires. (1) Place at least 2 tires under the tire to which theinstrument panel passenger airbag assy is tied.
(2) Place at least 2 tires over the tire to which the instru- ment panel passenger airbag assy is tied. The top
tire should have the disc wheel installed.
NOTICE:
Do not place the SST(s) connector under the fire because
the SST connector could be damaged.
http://vnx.su
Page 1438 of 2234

H42763
SST(s)
H43299
Battery
Instrument Panel
Passenger Airbag Assy
10 m (33 ft) or more
SST(s)
SST(s)
H42648
±
SUPPLEMENTAL RESTRAINT SYSTEM INSTRUMENT PANEL PASSENGER AIR BAG ASSY
60±35
AVENSIS REPAIR MANUAL (RM1018E)
(3) Tie the tires together with 2 wire harnesses.
CAUTION:
Make sure that the wire harness is tight. It is very danger-
ous when looseness in the wire harness result in the tires
coming free due to the shock from the airbag deployment.
HINT:
Place the SST(s) connector and the wire harness inside tires.
Secure at least 1 m (3 ft) of slack for the wire harness.
(f) Install the SST(s). Connect the connector of the SST(s).
SST 09082±00700
NOTICE:
To avoid damaging the SST(s) connector and wire harness,
do not lock the secondary lock of the twin lock. Also, se-
cure some slack for the SST(s) wire harness inside the tire.
(g) Deploy the airbag. (1) Connect the red clip of the SST(s) to the batterypositive (+) terminal and the black clip of the SST to
the battery negative (±) terminal.
(2) Check that no one is within a 10 m (33 ft) radius of the tire to which the instrument panel passenger air-
bag assy is tied.
(3) Press the activation switch of the SST(s) and
deploy the airbag.
HINT:
The airbag is deploys as the LED of the SST(s) activation switch
comes on.
(h) Dispose of the instrument panel passenger airbag assy.
CAUTION:
The instrument panel passenger airbag assy is very
hot when the airbag is deployed, so leave it alone for
at least 30 minutes after deployment.
Use gloves and safety glasses when handling the
instrument panel passenger airbag assy with the
deployed airbag.
Do not apply water, etc. to the instrument panel pas-
senger airbag assy with the deployed airbag.
Always wash your hands with water after completing
the operation.
(1) Remove the instrument panel passenger airbag assy from the tire.
(2) Place the instrument panel passenger airbag assy in a plastic bag, tie the end tightly and dispose of it
in the same way as other general parts disposal.
http://vnx.su