key TOYOTA CAMRY V20 1986 Service Information

17. INSTALL TENSION SPRINGS AND CORDS
(a) Fully tilt the main shaft upward.
(b) Connect the spring and cord, and hook the spring to
the hanger.
(c) Using a screwdriver, hook the cord end to the column
upper bracket. 14. INSTALL STOPPER6OLT
(a) Install the cushion to the stopper bolt.
(b) Install the stopper bolt, column cover support and
nut.
Torque: 110 kg±cm (8 ft±lb, 11 N±m)
16. INSTALL MAIN SHAFT
(a) Place the ignition key at the ACC position.
(b) Install the collar and spring to the main shaft and in-
sert the main shaft into the upper bracket.
(c) Using a screwdriver, push the main shaft to the main
shaft end.
(d) Using snap ring pliers, install the snap ring. 15. INSTALL TWO TENSION SPRINGS
± STEERINGSteering Column (Tilt Steering Column)SR±16

DISASSEMBLY OF POWER STEERING
PUMP
1. MOUNT POWER STEERING PUMP !N VISE
NOTICE: Do not tighten the vise too tight.
2. REMOVE PS PUMP PULLEY
(a) Using SST, remove the pulley set nut.
SST 09616±30020 (For SV Series)
SST 09616±22010 (For VZV Series)
(b) Remove the pulley and woodruff key.
3. (Ex. SV Series for USA)
REMOVE END PLATE
COMPONENTS
± STEERINGPower Steering (Power Steering PumpSR±33

11. INSTALL SUCTION PORT UNION
(a) Install a new O±ring to the suction port union.
(b) Install the suction port union into the housing.
(c) Install and torque the bolt.
Torque: 130 kg±cm (9 ft±Ib, 13 N±m)
12. (SV Series)
INSTALL AIR CONTROL VALVE
13. INSTALL PS PUMP PULLEY
(a) Install the woodruff key to the shaft.
(b) Install the pulley and nut to the shaft.
(c) Using SST, torque the nut.
SST 09616±30020 (For SV Series)
SST 09616±22010 (For VZV Series)
Torque: 440 kg±cm (32 ft±Ib, 43 N±m)
14. (Ex. SV Series for USA)
INSTALL END PLATE
Torque: 130 kg±cm (9 ft±lb, 13 N±m)
± STEERINGPower Steering (Power Steering Pump)SR±42