display TOYOTA COROLLA 2011 10.G User Guide

210
3-2. Using the audio system
Using the radio
Ty p e A
Type B and C
Vo lu m e
Seeking a frequency Station selector
AM/FM mode buttons Adjusting the frequency Power
Scanning for receivable stations
Power Volume
Adjusting the frequency
(AM, FM mode) or
channel (SAT mode)
Seeking a frequency Displaying radio
text messages
AM/FM/SAT
mode button
Scanning for
receivable stations Station selector
Setting preset buttons Changing the channel category

212 3-2. Using the audio system
■Displaying radio text messages (for type B and C, FM mode
only)
When a new radio text message is received, “MSG” is shown on
the display. To display the message, press .
If the text continues past the end of the display, “ ” is displayed. Press
and hold until you hear a beep.
Text messages are not displayed while driving.
XM® Satellite Radio (type B and C)
■ Receiving XM
® Satellite Radio
Press .
The display changes as follows each time is
pressed.
AM  FM  XM
Turn to select the desired channel in all the categories,
or press “ ” or “ ” on to select the desired channel in
the current category.
■ Setting XM
® Satellite Radio channel presets
Select the desired channel. Press and hold a button
(from to ) until you hear a beep.
■ Changing the channel category
Press “ ” or “ ” on the .
STEP 1
STEP 2

213
3-2. Using the audio system
3
Interior features
■
Scanning XM® Satellite Radio channels
● Scanning channels in the current category
Press .
When the desired channel is reached, press again.
● Scanning preset channels
Press and hold until you hear a beep.
When the desired channel is reached, press again.
■ Displaying text information
Press .
Each time is pressed, the display changes in the following
order:
Title (song/program title) Name (artist name/feature) Title (song/pro-
gram title).
STEP 1
STEP 2
STEP 1
STEP 2

217
3-2. Using the audio system
3
Interior features
Using the CD player
Ty p e A
Type B and C
Vol um eRandom playbackRepeat play Playback
Power
CD eject
Displaying text messages
Searching playback
Selecting a track/
fast-forwarding
and rewinding
Power Volume CD load
(type C only)
Searching playback CD eject
Selecting a track/
fast-forwarding and rewinding Displaying text
messages
Selector buttons
Playback Playback/pauseSelecting a track

219
3-2. Using the audio system
3
Interior features
Ejecting CDs
■ Ejecting a CD
Type A and B
Press and remove the CD.
Type C
To select the CD to be ejected, press ( ) or
().
The selected CD number is shown on the display.
Press and remove the CD.
■ Ejecting all the CDs (type C only)
Press and hold until you hear a beep, and then remove the
CDs.
Selecting a track
Press “
” to move up or “ ” to move down using or
until the desired track number is displayed.
Fast-forwarding and reversing tracks
To fast-forward or reverse, press and hold “
” or “ ” on or
.
STEP 1
STEP 2

221
3-2. Using the audio system
3
Interior features
■
All CDs (type C only)
Press (RDM) twice.
Tracks on all loaded CDs are played in random order.
To cancel, press the button again.
Repeat play
■ Repeating a track
Press (RPT) or (RPT).
To cancel, press the button once more (type A and B), or twice more
(type C).
■Repeating all of the tracks on a CD (type C only)
Press (RPT) twice.
To cancel, press the button again.
Switching the display
Press or .
Each time or is pressed, the display changes in the
following order:
Type A: Track no./Elapsed time  CD title Track name.
Type B and C: Track title Track name/Artist name Track name/
Elapsed time.

222 3-2. Using the audio system
■Display
Up to 12 characters can be displayed at a time.
If there are 13 characters or more, pressing and holding or
for 1 second or more will display the remaining characters.
A maximum of 24 characters can be displayed.
If or is pressed for 1 second or more again or has not
been pressed for 6 seconds or more, the display will return to the first 12
characters.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.
■ Error messages
“CD CHECK”: This indicates a problem either in the CD or inside the player.
The CD may be dirty, damaged or inserted up-side down.
“WAIT” or “PLEASE WAIT”: Operation has stopped due to a high tempera- ture inside the player. Wait for a while and then
press or . Contact your
Toyota dealer if the CD still cannot be played
back.
■ Discs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc fea-
tures, or due to scratches, dirt or deterioration.
CDs with copy-protect features may not be used.
■ CD player protection feature
To protect the internal components, playback is automatically stopped when
a problem is detected while the CD player is being used.
■ If CDs are left inside the CD player or in the ejected position for
extended periods
CDs may be damaged and may not play properly.

225
3-2. Using the audio system
3
Interior features
Playing back MP3 and WMA discs
Ty p e A
Type B and C
Vol um eRandom playbackRepeat play
Playback
Power
CD eject
Displaying text messages
Searching playback
Selecting a file
Selecting a folder
Selecting a file/
fast-forwarding and rewinding
Power Volume Displaying text messages
CD eject
Playback Playback/pause Selecting a file
CD load
(type C only)
Selector buttons
Selecting a
folder
Searching playback
Selecting a file/
fast-forwarding and rewinding

228 3-2. Using the audio system
Repeat play■ Repeating a file
Press (RPT) or (RPT).
To cancel, press the button once more (type A), twice more (type B) or
three times (type C).
■Repeating all of the files on a folder
Type A
Press and hold (RPT) until you hear a beep.
To cancel, press the button again.
Type B and C
Press (RPT) twice.
To cancel, press the button once more (type B), or twice more (type C).
■Repeating all of the files in a disc (type C only)
Press (RPT) three times.
To cancel, press the same button again.
Switching the display
Press or .
Each time or is pressed, the display changes in the
following order:
Type A: Folder no./File no./Elapsed time  Folder name File name 
Album title (MP3 only) Track title Artist name.
Type B and C: Track title Track title/Artist name  Track title/Album
name (MP3 only)  Track title/Elapsed time.

229
3-2. Using the audio system
3
Interior features
■
Display (type A only)
P. 222
■ Error messages
“CD CHECK”: This indicates a problem eit her in the CD or inside the player.
The CD may be dirty, damaged or inserted up-side down.
“NO MUSIC”: This indicates that MP3/WMA files are not included in the CD.
“WAIT” or “PLEASE WAIT”: Operation has stopped due to a high tempera- ture inside the player. Wait for a while and then
press or . Contact your
Toyota dealer if the CD still cannot be played.
■ Discs that can be used
P. 222
■ CD player protection feature
P. 222
■ If CDs are left inside the CD player or in the ejected position for
extended periods
P. 222
■ Lens cleaners
P. 223