stop start TOYOTA GT86 2019 Owners Manual (in English)

2
Instrument panel
Steering wheel controls
OVERVIEW
Paddle shift switches*
Audio control
switchesIgnition switch* Meter control switches*
Headlight, turn signal and
fog light* controlsWindshield wiper and washer switch Meters/Multi-Information Display (MID)
Tilt and telescopic steering lock release leverHood lock release lever Fuel tank door release lever“ENGINE START
STOP” switch* Trunk opener switch Instrument panel light controlCruise control switch

OVERVIEW FEATURES & OPERATIONS SAFETY & EMERGENCY FEATURES
7
Smart Key system (if equipped)
START FUNCTION
POWER (WITHOUT STARTING ENGINE)
On - All electrical components can be used.
Accessory – Some electrical components can be used.
Off - All systems OFF. Emergency flashers can be used. NOTE: The Smart Key must be carried to enable the start function. With gear
shift lever in Park and the brake pedal depressed (automatic transmission)/
with the gear shift lever in N and the clutch pedal depressed (manual
transmission), push the “ENGINE START STOP” switch.
Without depressing the brake pedal (automatic transmission)/ the clutch pedal
(manual transmission), pressing the engine switch will change the operation mode
in succession from:
Fuel tank door release & cap
NOTE: Tighten until one click is heard. If the cap is not tightened enough,
Check Engine “
” indicator may illuminate.
Pull up
Store
Turn to open

OVERVIEW FEATURES & OPERATIONS SAFETY & EMERGENCY FEATURES
19
Power outlets
USB media/AUX port
USB media port
By connecting a USB-compatible portable audio device or USB memory stick into
the USB media port, you can listen to music through the vehicle’s speaker system.
AUX port
By inserting an AUX cable into the AUX port, you can listen to music from a
portable audio device through the vehicle’s speaker system while in AUX mode.
Refer to the Owner’s Manual for more details.
Designed for car accessories. The “ENGINE START STOP”/ignition switch must be
in the ACCESSORY or IGNITION ON/“ACC” or “ON” position for use.
Console trayGlove box
Clock
00
The “ENGINE START STOP”/ignition switch must be in the ACCESSORY or
IGNITION ON/“ACC” or “ON” position for use.
Minute set
Hour setRound off
minutes

OVERVIEW FEATURES & OPERATIONS SAFETY & EMERGENCY FEATURES
21
Seat heaters (if equipped)
The “ENGINE START STOP” switch must be in IGNITION ON mode for use.
Rapid heating
Normal heating
Cup/bottle holders
Changing the positionChanging the tray size
CUP HOLDERS
BOTTLE HOLDERS

24
SAFETY & EMERGENCY FEATURES
Star Safety System™
Your vehicle comes standard with the Star Safety SystemTM, which combines Anti-
lock Braking System (ABS), Brake Assist (BA), Electronic Brake-force Distribution
(EBD), Smart Stop Technology (SST), Traction Control (TRAC) and Vehicle Stability
Control (VSC).
Refer to the Owner’s Manual for more details and important information on
limitations to these systems.
Smart Stop Technology automatically reduces engine power when the accelerator
and brake pedals are pressed simultaneously under certain conditions.
SST engages when the accelerator is depressed first and the brakes are applied
firmly for longer than one-half second at speeds greater than five miles per hour.
SST doesn’t engage if the brake pedal is depressed before the accelerator pedal,
allowing vehicles to start on a steep hill and safely accelerate without rolling
backward.
SMART STOP TECHNOLOGY (SST)
VSC helps prevent loss of traction during cornering by reducing engine power and
applying brake force to selected wheels.
Toyota’s VSC monitors steering angle and the direction your vehicle is traveling.
When it senses that the front or rear wheels begin to lose traction, VSC reduces
engine power and applies braking to selected wheels. This helps restore traction
and vehicle control.
VEHICLE STABILITY CONTROL (VSC)
Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup
by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure
repeatedly for fractions of a second. This helps the tires attain the traction that
current road conditions will allow, helping you to stay in directional control.
ANTI-LOCK BRAKE SYSTEM (ABS)
Brake Assist is designed to detect sudden or “panic” braking, and then add braking
pressure to help decrease the vehicle’s stopping distance. When there’s only a split
second to react, Brake Assist can add additional brake pressure more quickly than
just the driver alone can.
BRAKE ASSIST (BA)
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD) to help
maintain control and balance when braking. Abrupt stops can cause a vehicle to tilt
forward, reducing the braking power of the rear wheels. EBD responds to sudden
stops by redistributing brake force to enhance the braking effectiveness of all four
wheels.
ELECTRONIC BRAKE FORCE DISTRIBUTION (EBD)