instrument cluster TOYOTA iM 2016 Owners Manual (in English)

Scion iM_U (12J49U)
Pictorial indexSearch by illustration
1For safety
and securityMake sure to read through them
2Instrument
clusterHow to read the gauges and meters, the variety of
warning lights and indicators, etc.
3
Operation of
each
componentOpening and closing the doors and windows,
adjustment before driving, etc.
4DrivingOperations and advice which are necessary for
driving
5Interior featuresUsage of the interior features, etc.
6Maintenance
and careCaring for your vehicle and maintenance
procedures
7When trouble
arisesWhat to do in case of malfunction or emergency
8Vehicle
specificationsVehicle specifications, customizable features, etc.
9For ownersReporting safety defects for U.S. owners, and seat
belt and SRS airbag instructions for Canadian
owners
IndexSearch by symptom
Search alphabetically

TABLE OF CONTENTS2
Scion iM_U (12J49U)For your information....................... 6
Reading this manual .................... 10
How to search .............................. 11
Pictorial index .............................. 12
1-1. For safe use
Before driving ...................... 22
For safety drive ................... 24
Seat belts ............................ 26
SRS airbags ........................ 32
Front passenger occupant classification system ......... 45
Safety information for children ........................ 51
Child restraint systems ........ 52
Installing child restraints ...... 56
Exhaust gas precautions ..... 65
1-2. Theft deterrent system Engine immobilizer system............................... 66
Theft prevention labels (U.S.A.) ............................. 68
2. Instrument cluster Warning lights and indicators........................... 70
Gauges and meters............. 74
Multi-information display ..... 76 3-1. Key information
Keys..................................... 84
3-2. Opening, closing and locking the doors
Side doors ........................... 88
Back door ............................ 91
3-3. Adjusting the seats Front seats........................... 95
Rear seats ........................... 96
Head restraints .................... 98
3-4. Adjusting the steering wheel and mirrors
Steering wheel ................... 101
Inside rear view mirror ....... 103
Outside rear view mirrors ............................. 104
3-5. Opening and closing the windows
Power windows.................. 106
1For safety and security
2Instrument cluster
3Operation of each
component

69
Instrument cluster2
Scion iM_U (12J49U)2. Instrument cluster
Warning lights and indicators .......................... 70
Gauges and meters ............ 74
Multi-information display ..... 76

70
Scion iM_U (12J49U)
2. Instrument cluster
The units used on the meters and some indicators may differ depending on
the target region.
Warning lights and indicators
The warning lights and indicators on the instrument cluster and
center panel inform the driver of the status of the vehicle’s vari-
ous systems.
For the purpose of explanation, the following illustration dis-
plays all warning lights a nd indicators illuminated.

712. Instrument cluster
2
Instrument cluster
Scion iM_U (12J49U)
Warning lights inform the driver of malfunctions in the indicated vehi-
cle’s systems.
*: These lights turn on when the engine switch is turned to the “ON” position to indicate that a system check is being performed. They will turn off after
the engine is started, or after a few seconds. There may be a malfunction
in a system if a light does not come on, or turn off. Have the vehicle
inspected by your Scion dealer.
Warning lights
*
(U.S.A.)
Brake system warning
light ( P. 262)*Electric power steering
system warning light
(P. 263)
*
(Canada)
Brake system warning
light ( P. 262)*
Slip indicator ( P. 263)
*
(U.S.A.)
Malfunction indicator
lamp (P. 262)Low fuel level warning
light (P. 263)
*
(Canada)
Malfunction indicator
lamp ( P. 262)Seat belt reminder light
(P. 263)
*SRS warning light
(P. 262)*Tire pressure warning
light ( P. 263)
*
(U.S.A.)
ABS warning light
(P. 263)*Master warning light
(P. 264)
*
(Canada)
ABS warning light
(P. 263)

722. Instrument cluster
Scion iM_U (12J49U)
The indicators inform the driver of the operating state of the vehicle’s
various systems.
*1: These lights turn on when the engine switch is turned to the “ON” position to indicate that a system check is being performed. They will turn off after
the engine is started, or after a few seconds. There may be a malfunction
in a system if a light does not come on, or turn off. Have the vehicle
inspected by your Scion dealer.
*2: The light flashes to indicate that the system is operating.
*3: The light does not turn on when the system is disabled.
*4: This light illuminates on the center panel.
*5: When the outside temperature is approximately 37°F (3°C) or lower, theindicator will flash for approximately 10 seconds, then stay on.
Indicators
Turn signal indicator
(P. 137)*1VSC OFF indicator
(P. 158)
(U.S.A.)
Headlight indicator
(P. 139)*1, 3
(if equipped)
Eco Driving Indicator
Light ( P. 80)
(Canada)
Tail light indicator
(P. 139) *4Security indicator
(P. 66)
Headlight high beam
indicator ( P. 139)
(if equipped)
Sport mode indicator
(P. 132)
Cruise control indicator
( P. 151)
*5Low outside tempera-
ture indicator ( P. 74)
Cruise control “SET”
indicator ( P. 151)
*1, 4“AIR BAG ON/OFF” indi-
cator (P. 45)
*1, 2
Slip indicator ( P. 157)

732. Instrument cluster
2
Instrument cluster
Scion iM_U (12J49U)
WARNING
nIf a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning lights not
come on when you start the engine, this could mean that these systems are
not available to help protect you in an accident, which could result in death
or serious injury. Have the vehicle inspected by your Scion dealer immedi-
ately if this occurs.

742. Instrument cluster
Scion iM_U (12J49U)
Tachometer
Displays the engine speed in revolutions per minute.
Speedometer
Displays the vehicle speed.
Outside temperature
Displays the outside temperature within the range of -40°F (-40°C) to
122°F (50°C).
Low outside temperature indicator comes on when the ambient tempera-
ture is 37°F (3°C) or lower.
Shift position and gear position indicator (if equipped)
P. 131
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Engine coolant temperature gauge
Displays the engine coolant temperature.
Multi-information display
P. 7 6
Gauges and meters
1
2
3
4
5
6
7

752. Instrument cluster
2
Instrument cluster
Scion iM_U (12J49U)
nThe meters and display illuminate when
The engine switch is in the “ON” position.
n Outside temperature display
lIn the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change.
• When stopped, or driving at low speeds (less than 9 mph [15 km/h])
• When the outside temperature has changed suddenly (at the entrance/
exit of a garage, tunnel, etc.)
l If “  ” is displayed continuously, the system may be malfunctioning. Take
your vehicle to your Scion dealer.
NOTICE
n To prevent damage to the engine and its components
lDo not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
l The engine may be overheating if the engine coolant temperature gauge
enters the red zone. In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. (P. 288)

762. Instrument cluster
Scion iM_U (12J49U)
The multi-information display presents the driver with a variety of driv-
ing-related data, such as the current outside temperature. The multi-
information display can also be used to change the display settings
and other settings.
l Outside temperature ( P. 74)
l Shift position and gear position
indicator (if equipped)
( P. 131)
l Pop-up display
In some situations a warning
message or the operation sta-
tus of a system will be tempo-
rarily displayed on the multi-
information display.
l Trip information/Meter light control ( P. 7 7 )
Displays the following items: •Odometer
•Trip meter
• Meter light control
l Menu icons ( P. 78)
Select a menu icon to display its content.
Drive information ( P. 7 8 )
Select to display various drive data.
Warning message display ( P. 269)
Select to display warning messages and measures to be taken if a
malfunction is detected.
Settings display ( P. 80)
Select to change the meter display settings and other settings.
Multi-infor mation display
Display content