display TOYOTA LAND CRUISER 2003 J100 Navigation Manual

85
2003 Land Cruiser 100 Navigation (OM60A00U)
3UE004
To set the average speeds:
1. Touch the “Change speed” switch of
Estimated travel time.
2. Touch
or to set the average ve-
hicle speeds for driving on a Freeway,
Main street and Residential area.
If you touch the
“Default” switch, the de-
fault speed is set at each item.
3. After you finish setting the desired
speeds, touch the
“OK” switch. The Set-
up screen returns.
INFORMATION
 The displayed time to the destination
is the approximate driving time cal-
culated based on the speeds you se-
lected and your actual position
along the guidance route.
 The time shown may vary greatly de-
pending on your progress along the
route (which may be af fected by road
conditions such as traffic jams,
construction work, etc.)
 Up to 99 hours 59 minutes can be dis-
played.
1. Push the “MENU” switch.
1UE040
2. Touch the “Setup” switch.
3UE005
Adjusting time zone

88
2003 Land Cruiser 100 Navigation (OM60A00U)
3. Touch the “On” switch on the right of
Current street name.
The current street name appears on the Map
screen.
3UE011
3UE012T
This system has a function which informs
you of the time to replace certain parts or
components as well as other information
shown on the screen. (See “Information
items” on page 89.) When the system
begins operating after reaching either the
Information Item’s date or driving dis-
tance, the Information screen will be dis-
played.
The Information screen will not be displayed
again by touching the
“Do not display
this message again”
switch.
3UE013
1. Push the “INFO” button to display
the Information Menu screen. Touch the
“Maintenance” switch to display the
Maintenance screen.
2. Touch your desired icon and input the
conditions.
Maintenance information

89
2003 Land Cruiser 100 Navigation (OM60A00U)
3UE014
Date of notice: Input the next maintenance
date.
Distance of notice: Input the driving dis-
tance until the next maintenance check. You
can input a five−digit number for the driving
distance.
When you touch the
! switch on the
screen, the screen changes to display the
change name screen. Touch the keys to in-
put your desired name and then input the
conditions. After you input the information, touch the
“OK” switch. The screen then returns to
the Maintenance screen. The icon’s color will
change to green after the date or driving dis-
tance are input. The icon’s color will change
to orange when your vehicle needs to be ser-
viced. The following switches appear on the
Maintenance screen.
Delete all: Cancel all conditions which have
been input.
Reset all: Reset the item which has satisfied
either condition.
Touch the
“Off” switch of the Maintenance
screen, and the Information screen will no
longer be displayed.
INFORMATION
 For scheduled maintenance infor-
mation, please refer to the “Owner’s
Manual Supplement / Scheduled
Maintenance”.
 Depending on your driving or the
road conditions, the system may
have a timelag between the data
which has been input and the actual
date and driving distance.
Information items
Oil change
Replace oil filter
Rotate tires
Replace tires
Replace battery
Replace brake linings
Replace wiper blades
Replace engine coolant

91
2003 Land Cruiser 100 Navigation (OM60A00U)
3UE016T
2. After you enter your dealer, the screen
changes and displays the map location of
the dealer. If it is OK, touch the
“OK”switch.
The current screen changes to the screen
where you can edit the data of your dealer.
(See (b) Editing dealer.)
By touching the
“View map” switch of
Edit dealer screen. Y ou can see the location
of the dealer. (See “Entering Destination” on
page 22.)
3UE017T
1. Touch the “Set dealer” switch and
touch the “Change” switch of the item
to edit. 
Editing the name of the dealer or staff
in charge
3UE018
Touch alphabet or numeral keys directly
to input the name.
After you finish your entry, touch the
“OK”
switch. The previous screen will be dis-
played.
(b) Editing dealer

92
2003 Land Cruiser 100 Navigation (OM60A00U)
Editing the location
3UE019T
Touch the arrows to scroll to your desired
point on the Map screen.
Touch the
“OK” switch when the cursor
moves to your desired point.
The previous screen will be displayed. 
Editing the phone number
3UE020
Touch numeral keys directly.
After you finish your entry, touch the
“OK”
switch.
The previous screen will be displayed.
After you finish any editing, touch the
“Back” switch.
3UE017T
1. Touch the “Set dealer” switch and
touch the “Delete dealer” switch.
(c) Deleting dealer

93
2003 Land Cruiser 100 Navigation (OM60A00U)
3UE021T
2. A selected point will appear. Also, a
message will appear at the bottom of the
screen. To delete, touch the
“Yes”switch. To cancel the deletion, touch the“No” switch.
3UE022
This system has a function which informs
you of the memo you entered. When the
system begins operating after reaching
the memo’s date, the Information screen
will be displayed.
The Information screen will not be displayed
again by touching the
“Do not display
this message again”
switch.
3UE023
1. Push the “INFO” button on the bezel
to display the Information Menu screen.
2. Touch the
“Calendar” switch to dis-
play the Calendar screen.
Today’s date is circled in green. If today’s
date is not displayed on the screen, touch
“Today” switch to display a calendar of
this month.
Calendar with memo

94
2003 Land Cruiser 100 Navigation (OM60A00U)
(a) Inputting a memo
3UE023
1. Touch directly on the day you want to
input a memo.
3UE024
2. Touch the “Memo” switch to display
the screen to input a memo.
3UE025
3. Touch alphabet, umlaut keys directly
to input a memo. You can input up to 24
letters. After you input the memo, touch the
“OK”
switch at
the bottom right of the screen. The
previous screen will be displayed.
You can input a memo until December 31.
2020.
The date you input the memo is displayed
with mark as above illustration. The de-
fault color of the mark is white.

95
2003 Land Cruiser 100 Navigation (OM60A00U)
3UE024
You can select your desired date and/or
mark color. Touch the
“Chg. mark”
switch.
3UE026
Select your desired Date or Mark color. If
you want to default the Date color you
chose, touch the
“Cancel” switch. After
you select the Date and/or Mark color,
touch the
“OK” switch to display the
previous screen.
(b) Adding a Memo
3UE024
When you want to add a memo, touch di-
rectly on the date you want to add the
memo.
The Memo screen appears on the display.
If touching
“Memo” switch, the screen
to input a memo is displayed. (See page
96 for inputting a memo.)
You can input up to three memos a day.

96
2003 Land Cruiser 100 Navigation (OM60A00U)
(c) Deleting a memo
3UE024
Touch the date you already input the me-
mo. Display the memo you want to delete
and then touch the
“Delete” switch. A
message appears on the display. To de-
lete, touch the
“Yes” switch. To cancel
the deletion, touch the
“No” switch.
(d) Editing a memo
3UE024
If you want to edit the memo, touch the
date. Touching the
“Edit” switch will
display the Memo edit screen. (See page
97 for the details.)
(e) Memo list
3UE023
If you want to have a look at the memo
you input, touch the
“List” switch to dis-
play the memo list.
3UE027
Touch your desired search condition to
list the memo. The memo list is displayed
on the screen.

97
2003 Land Cruiser 100 Navigation (OM60A00U)
3UE028
In case of touching the “Period” switch,
you can display the memo list as long as
you desired. Touch numeral keys to input
your desired search period. After input-
ting a search period of time, touch the
“OK” switch. The Memo list screen will
be displayed.
You can input a search period from January
1. 2000 through December 31. 2020.
3UE029a
If you want to delete and/or edit the
memo, touch the
switch of the
memo.
If you want to delete all of the memo,
touch the
“Delete all” switch. A mes-
sage appears on the display. To delete,
touch the
“Yes” switch. If not, touch the
“No” switch. If you want to remove all of the color of
date you input, touch the
“Remove
color of date”
switch. A message ap-
pears on the display. To remove it, touch
the
“Yes” switch. If not, touch the “No”
switch.
3UE024
To edit: Touch the “Edit” switch. (See
page 96 for details.)
To d e l e t e : Touch the
“Delete” switch.
(See page 96 for details.)