warning TOYOTA LAND CRUISER 2020 Owners Manual (in English)

1
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY &
EMERGENCY FEATURES
INDEX
Engine maintenance 9
Fuel tank door release & cap 8
Hood release 8
Indicator symbols 4-5
Instrument cluster 4
Instrument panel 2-3
Instrument panel light control 9
Keyless entry
1 6-7
Smart Key system1,2 7
1 Visit your Toyota dealer for information on customizing this feature.2 Programmable by customer. Refer to the Owner’s Manual for instructio\
ns and more information.3 HomeLink® is a registered trademark of Gentex Corporation.
OVERVIEW
FEATURES & OPERATIONS FEATURES & OPERATIONS (continued)
SAFETY & EMERGENCY FEATURES TOYOTA SAFETY SENSE™ P (TSS-P)
Air conditioning/heating 22-23
Audio
20
Auto lock/unlock
1 10
Automatic transmission 10-11
Back door 16
Blind Spot Monitor with Rear
$ross 5raffic AMert #4. w3$5A

Clock 21
Cool box 33
Crawl Control
w5urn Assist 'unction

Cup holders 33
Door locks 16
Four-wheel drive 11
Garage door opener (HomeLink
®)3 30
Headlight cleaner switch 15
Intuitive parking assist 28
Lights
1 & turn signals 17
Moonroof 19
Multi-Information Display (MID)
2 24
Multi-terrain Monitor 27
Multi-terrain Select 27
Parking brake 32
Power back door 16
Power outlets-12V DC 31
Power outlet-120V AC 31
Qi Wireless charger 32
Rear seat entertainment system 30
Rear view mirror-Outside 19
Seat adjustments-Front 12 Seat adjustments-Rear 12
Seat heaters/ventilators 23
Seats-Head restraints
12
Seats-Tumbling 2nd row seats 13
Seats-Tumbling 3rd row seats 14
Steering lock release 15
Steering wheel-Heater 24
Steering wheel switches &
teMeQhone controMs #Muetooth
®

Tilt & telescopic steering wheel 15
USB media/AUX port 21
7ehicMe 4taCiMity $ontroM 74$

TRAC OFF Switch 29
Windows-Power 18
Windshield wipers & washers 18
Floor mat installation 49
Rear door child safety locks 45
Safety Connect 47
Seat belts 45
Seat belts-Shoulder belt anchor 45
Spare tire & tools 46
Star Safety System
™ 48-49
Tire Pressure Monitoring
warning
4ystem 51.4
 Automatic )igh #eams A)#

Dynamic Radar
$ruise $ontroM %3$$

-ane %eQarture AMert -%A

Pre-Collision System with Pedestrian
%etection 1$4 w1%

Quick overview-
Toyota Safety Sense
™ 1 5441
34
Sensors 34
BLUETOOTH® DEVICE
PAIRING SECTION 50-56

2
OVERVIEWInstrument panel
Steering wheel controls
Power back door
main switch1
Audio remote
control switches2
Meter control switches
Dynamic Radar Cruise Control
(DRCC)/Cruise control switch Dynamic Radar Cruise
Control (DRCC)
vehicle-to-vehicle
distance button
Lane Departure
Alert (LDA) switch
Power tilt and telescopic steering control switch Headlight/turn signal/front fog light control
Meters
Multi-Information Display (MID) Windshield wiper and washer control
Multi-terrain monitor switch (VIEW)
Pre-Collision System
(PCS) switch Power back
door switch
1
Tire Pressure Monitoring
(warning) System reset switch1
Hood lock release lever
Fuel tank door release lever
Power outside rear view mirror switches
Automatic High Beam (AHB) switch
Intuitive parking assist switch
Headlight cleaner switch Voice Command switch
2
Telephone switches2

4
OVERVIEWInstrument cluster
For details, refer to “Indicators and warning lights,” Section 2, \
2020 Owner’s
Manual.
Engine oil pressure gauge Tachometer
Multi-Information Display (MID)
Speedometer
Voltmeter
Fuel gauge
Odometer and trip meter display
Shift position and range display
Odometer/trip meter display change button
Instrument panel light control dial
Engine coolant temperature gauge
Vehicles with a monochrome display
Arrow direction indicates fuel
tank door position
Brake system warning1
Anti-lock Brake System (ABS)
warning1
Charging system warning1
Center differential lock indicator
Crawl Control indicator1
Automatic headlight leveling system
warning1,2
AIR BAG ON-OFF indicator1
Airbag SRS warning1
Constant speed cruise control
indicator/Constant speed
cruise control SET indicator
Auto High Beam (AHB) indicator Blind Spot Monitor (BSM)
indicator
1,4
BSM outside rear view mirror
indicators4
BSM w/Rear Cross Traffic Alert
(RCTA) Indicator4
Indicator symbols
Service indicators and reminders

5
Low fuel level warning
Parking brake indicatorShift position and range indicators
Low Tire Pressure Warning1
Malfunction/Check Engine indicator1
Master warning1,2
Second start indicator (Automatic
Transmission)
Power mode indicator
Slip indicator1,3
Low speed four-wheel drive indicatorMulti-terrain select indicator
ECO driving indicator1
Turn assist function indicator
TRAC OFF indicator1
Turn signal indicator
Fog light indicator
Open door warning Pre-Collision System (PCS)
warning
1,2
Lane Departure Alert (LDA) indicator
Headlight low/high beam
indicator
Vehicle Stability Control (VSC) OFF
indicator1
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURESDynamic Radar Cruise Control
(DRCC) indicator/DRCC SET
indicator
Driver seat belt reminder
(alarm will sound when the engine switch
is IGNITION ON mode)
Front passenger seat belt reminder
(alarm will sound if the seat belt is not
fastened)
1
If the indicator does not turn off within a few seconds of starting the \
engine, there may be a
malfunction. Have the vehicle inspected by your Toyota dealer.
2 If the indicator flashes, there may be a malfunction. Refer to the Owner\
’s Manual.3 If the indicator flashes, it indicates that the system is operating.4 If equipped.

24
FEATURES & OPERATIONSMulti-Information Display (MID)
Select: To select an
item/change pagesPress: Enter, moves to next
screen and functions on/off
Up and down: Switches
screens and moves the cursor
Menu/Display: Switch
the top screenReturn: To previous
screen
Push “Multi-Information switches” to view or change information in\
the following:
Drive information
7ehicMe information disQMay if eRuiQQed

Navigation system-linked display
Audio system linked display
%riving assist system information if eRuiQQed

Warning messages
Settings display
The engine switch must be in the “IGNITION ON” mode.
Steering wheel-Heater

35
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
The Pre-Collision System uses a radar sensor and camera sensor to help d\
etect a
vehicle or pedestrian in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control pe\
rformance
that this system can provide, do not overly rely on this system. This sy\
stem will not
prevent collisions or lessen collision damage or injury in every situati\
on. Do not use
PCS instead of normal braking operations under any circumstances. Do not\
attempt
to test the operation of the pre-collision system yourself, as the syste\
m may not
operate or engage, possibly leading to an accident. In some situations, \
such as
when driving in inclement weather such as heavy rain, fog, snow or a san\
dstorm or
while driving on a curve and for a few seconds after driving on a curve,\
a vehicle or
pedestrian may not be detected by the radar and camera sensors, preventi\
ng the
system from operating or engaging properly.
Refer to the Toyota Owner’s Manual for a list of additional situation\
s in which the
system may not operate properly.
Pre-Collision Warning
When the system determines that the possibility of a frontal collision i\
s high, a
buzzer will sound and a warning message will be displayed on the Multi-I\
nformation
%isQMay .I%
to urge the driver to taLe evasive action.
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide addi\
tional
braking force using Brake Assist. This system may prime the brakes and m\
ay apply
greater braking force in relation to how strongly the brake pedal is dep\
ressed.
Pre-Collision Braking
If the driver does not brake in a set time and the system determines tha\
t the
possibility of a frontal collision with a preceding vehicle is extremely\
high, the
system may automatically apply the brakes, reducing speed in order to he\
lp the
driver reduce the impact and in certain cases avoid the collision.
Pre-Collision System with Pedestrian
Detection (PCS w/PD)
Refer to the Toyota Owner’s Manual for additional information on PCS \
w/PD
operation, settings adjustments, limitations, and precautions before att\
empting to
use it.

36
TOYOTA SAFETY SENSE
CHANGING PCS ALERT TIMING
Each time the Pre-Collision System switch is pressed, the response to th\
e warning
distance changes.Far
Middle
Near
Monocular camera sensor
Millimeter
wave radar
As part of the Pre-Collision System, this function is also designed to f\
irst provide an
alert and then automatic braking if needed.
Refer to the Toyota Owner’s Manual for additional limitations and inf\
ormation.Under certain conditions, the PCS system included with the TSS-P package\
may
also help to detect a pedestrian in front of your vehicle using the in-v\
ehicle camera
and front grille-mounted radar. The in-vehicle camera of PCS detects a \
potential
pedestrian based on size, profile, and motion of the detected pedestrian\
. However,
a pedestrian may not be detected depending on the conditions, including \
the
surrounding brightness and the motion, posture, size, and angle of the p\
otential
detected pedestrian, preventing the system from operating or engaging.
PCS PEDESTRIAN DETECTION

37
%I4A#-I/( 13&$0--I4I0/ 4:45&. 1$4

To disable the system
Press the PCS switch for 3 seconds or more.
The PCS warning light will turn on and a message will be displayed on th\
e Multi-
Information %isQMay .I%
.
To enable the system
Press the PCS switch again.
The system is enabled each time the engine switch is turned to IGNITION \
ON mode.
Lane Departure Alert (LDA)
TURNING THE LDA SYSTEM ON/OFF
Press the LDA switch to turn the LDA system on. Depress again to turn it\
off.
Note: The system will continue in the last state it was in (ON or OFF) when the
engine is started again.
Refer to the Owner’s Manual for limitations and more details on this \
system before
attempting to use it.
LDA in TSS-P uses an in-vehicle camera designed to detect visible white \
and
yellow lane markers in front of the vehicle and the vehicle’s positio\
n on the road.
If the system determines that the vehicle is starting to unintentionally\
deviate from
its lane, the system alerts the driver with an audio and visual alert. W\
hen the alerts
occur, the driver must check the surrounding road situation and carefull\
y operate
the steering wheel to move the vehicle back to the center part of their \
lane.
-%A is designed to function at sQeeds of aQQroYimateMy  mQh  Lmh
or higher
on relatively straight roadways.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES

39
ADJUSTING LDA ALERT SENSITIVITY
SWAY WARNING SYSTEM
The sway warning function can detect swaying based on the vehicle locati\
on in the
lane and the driver’s steering wheel operation. To help prevent swayi\
ng, the system
alerts the driver using a buzzer sound and a warning displays in the MID\
.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
5he driver can adKust the sensitivity of the -%A warning
function from the
.uMtiInformation %isQMay .I%
customi[ation screen.
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Normal - Is designed to warn approximately when the front
tire crosses the lane marker.

1ress i
” switches and select from the .uMtiInformation %isQMay .I%
.

6se i
” switches and select “LDA” and then press “”.

6se i
” switches and select “Alert sensitivity” and then press “” to
select the desired setting.

1ress “
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.

40
TOYOTA SAFETY SENSE™
DISABLING LDA SWAY WARNING SYSTEM
ADJUSTING SWAY ALERT SENSITIVITY

1ress i” switches and select from the .uMtiInformation %isQMay .I%
.

6se i
” switches and select “LDA” and then press “”.

6se i
” switches and select “Vehicle sway warning sensitivity” and th\
en
press “
” to select the desired setting.

1ress “
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.

1ress i
” switches and select from the .uMtiInformation %isQMay .I%
.

6se i
” switches and select “LDA” and then press “”.

6se i
” switches and select “Vehicle sway warning” and then press “\
”
to select the desired setting.

1ress “
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.