change time TOYOTA PRIUS PLUG-IN HYBRID 2016 Repair Manual

7119-2. Customization
PRIUS PHV_OM_OM47A89E_(EE)
9
Vehicle specifications
■Power windows (P. 307)
■Reverse warning buzzer (P. 336)
■Turn signal lever (P. 339)
FunctionDefault
settingCustomized
setting
Mechanical key linked opera-
tion (open)Off On – – O
Mechanical key linked opera-
tion (close)Off On – – O
Wireless remote control linked
operation (open)Off On – – O
Wireless remote control linked
operation (close)Off On – – O
Mechanical key, wireless
remote control linked opera-
tion signal (buzzer)On Off – – O
123
FunctionDefault
settingCustomized
setting
Signal (buzzer) when the shift
position is in RSingleIntermittent––O
123
FunctionDefault
settingCustomized
setting
Times of flashing of the lane
change signal flashers3Off
––O 5
7
123

7129-2. Customization
PRIUS PHV_OM_OM47A89E_(EE)■
Automatic light control system (P. 341)
■AHS (Adaptive High-beam System) (P. 345)
*: Only high beam will be turned on or off.
FunctionDefault
settingCustomized
setting
Light sensor sensitivityLevel 0Level -2 to 2–OO
Time elapsed before head-
lights turn off (follow me home
system)
30 seconds
60 seconds
––O90 seconds
120 seconds
123
FunctionDefault settingCustomized
setting
Adaptive High-beam
SystemOnOff*——O
Clearance between a
vehicle ahead and the
shaded high beams
Standard
Narrow
——O
Wide
Vehicle speed at which
the brightness and illu-
minated area adjust-
ment of the high beams
changes modeApproximately
120 km/h
(75 mph) or
more
Approximately
100 km/h
(63 mph) or
more
——OApproximately
80 km/h
(50 mph) or
more
Intensity adjustment of
the high beams when
driving around a curve
(illuminates the area in
the direction vehicle is
turning more brightly)
OnOff——O
Projection distance
adjustment of the low
beams according to the
distance to a preceding
vehicle
OnOff——O
123

7169-2. Customization
PRIUS PHV_OM_OM47A89E_(EE)
■In the following situations, customize mode in which the settings can be
changed through the multi-information display will automatically be
turned off.
● The power switch is turned off.
● The vehicle begins to move while the customize mode screen is displayed.
■Charge settings
■Maintenance system
WARNING
■ Cautions during customization
As the hybrid system needs to be operating during customization, ensure
that the vehicle is parked in a place with adequate ventilation. In a closed
area such as a garage, exhaust gases including harmful carbon monoxide
(CO) may collect and enter the vehicle. This may lead to death or a serious
health hazard.
NOTICE
■ During customization
To prevent 12-volt battery discharge, ens ure that the hybrid system is oper-
ating while customizing features.
Charge scheduleSetting the charging timer: P. 166
Charge currentChanging the upper limit of the charging cur-
rent: P. 137
Traction battery heaterSetting “Traction Battery Heater” on/off:
 P. 142
Tire pressure warning
system
Initializing the tire pressure warning system:
 P. 581