remote control TOYOTA RAV4 HYBRID 2018 Owners Manual (in English)

NOTE: If battery is disconnected, the power back door needs to be reinitialized.
1. When the liftgate reaches the desired height, push the rear liftgate cl\
ose-button on the door Kam of the Miftgate
once. 1ress and hoMd the Cutton untiM the Cu[[er
sounds.
2. To reset the height, with the liftgate open and not moving, press and h\
old the
rear liftgate close-button until it buzzer sounds 4 times, and continue to h\
old until
it buzzes again -then let go. Push the same button to close the liftgate. \
When you
next open the liftgate it will open to the maximum height.
3. To set the height using the Multi-Information Display, press or meter control
switches and select
from the MID. Press or and select and
then press “
”. Select Opening Adjustment, then press “”. Select desired
Qosition  height oQtions to choose from,
then Qress “
”.
NOTE: If the liftgate has stopped operating, check inside the glove box, on the
left side, to ensure the PWR DOOR OFF button has not been pushed.
For more details, see Owner’s Manual.
14
FEATURES & OPERATIONS
Daytime Running Light system (DRL) Automatically turns on the headlights at a
reduced intensity.
Automatic On/Off
1 The side marker, parking, tail, license plate, instrument panel
and headlights turn on and off automatically
Automatic Off
1 Automatically turns lights off after a delay of 30 seconds, or when
the lock switch on remote is pushed after all the doors are locked.
Automatic High Beam (AHB) system Automatically switches between high
and low beams as appropriate to provide the most light possible and enhance\
forward visibility. Refer to Toyota Safety Sense™ P (TSS-P) in this guide or the
Owner’s Manual for more details on the Automatic High Beam feature.
* Operating conditions must be met. Refer to Owner’s Manual for detail\
s.
1 If equipped.
Type A
Type C
Type B
1 The right hand signals will flash three times.2 The left hand signals will flash three times.
Front fog lights come on only when the headlights are on low beam. To
automatically open/close Power Liftgate Put your foot near the lower center part of the rear bumper for less than 2-seconds to trigger sensor. To operat\
e, make
sure that the touchless sensor operation is enabled and that you are carryin\
g the
remote.
Instrument panel
Power Liftgate (back door)
Touchless Power Liftgate (if equipped)
(close only)
or
Auto High beam*
Lights & turn signals
HEADLIGHTS
TURN SIGNALS
PROGRAMMABLE POWER LIFTGATE
FOG LIGHTS
FOG LIGHTS-is it if equipped, OM is not conclusive ASK
Parking lights
Parking lights Low beam
High beam
flasher
High
beam
Auto
DRL ON Headlights
Headlights
DRL OFF
Parking lights
DRL ON Headlights
OFF
Right turn
Lane change
1
Lane change2
Left turn
TurnOFFON
2018_RAV4-HV_QRG_V2-JA0803.indd 148/4/17 4:35 AM

NOTE: If battery is disconnected, the power back door needs to be reinitialized.1. When the liftgate reaches the desired height, push the rear liftgate \
close-button on the door Kam of the Miftgate
once. 1ress and hoMd the Cutton untiM the Cu[[er
sounds.
2. To reset the height, with the liftgate open and not moving, press and\
hold the rear liftgate close-button until it buzzer sounds 4 times, and continue \
to hold until
it buzzes again -then let go. Push the same button to close the liftgate\
. When you
next open the liftgate it will open to the maximum height.
3. To set the height using the Multi-Information Display, press
or meter control
switches and select
from the MID. Press or and select and
then press “
”. Select Opening Adjustment, then press “”. Select desired
Qosition  height oQtions to choose from,
then Qress “
”.
NOTE: If the liftgate has stopped operating, check inside the glove box, on the
left side, to ensure the PWR DOOR OFF button has not been pushed.
For more details, see Owner’s Manual.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
15
Daytime Running Light system (DRL) Automatically turns on the headlights at a
reduced intensity.
Automatic On/Off
1 The side marker, parking, tail, license plate, instrument panel
and headlights turn on and off automatically
Automatic Off
1 Automatically turns lights off after a delay of 30 seconds, or when
the lock switch on remote is pushed after all the doors are locked.
Automatic High Beam (AHB) system Automatically switches between high
and low beams as appropriate to provide the most light possible and enha\
nce
forward visibility. Refer to Toyota Safety Sense™ P (TSS-P) in this guide or the
Owner’s Manual for more details on the Automatic High Beam feature.
* Operating conditions must be met. Refer to Owner’s Manual for detai\
ls.
1 If equipped.
1 The right hand signals will flash three times.2 The left hand signals will flash three times.
Front fog lights come on only when the headlights are on low beam.
To automatically open/close Power Liftgate Put your foot near the lower center
part of the rear bumper for less than 2-seconds to trigger sensor. To op\
erate, make
sure that the touchless sensor operation is enabled and that you are car\
rying the
remote.
Door-Power Liftgate (if equipped)
Instrument panel
Power Liftgate (back door)
Touchless Power Liftgate (if equipped)
(open only)
Sensor area
(close only)
Carry remote
Smart key feature
Open: Push and hold
Close: Push and hold again
Stop: Push once during operation to stop
PROGRAMMABLE POWER LIFTGATE
High beam
flasher
2018_RAV4-HV_QRG_V2-JA0803.indd 158/4/17 4:35 AM