low beam TOYOTA SUPRA 2019 User Guide
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2019, Model line: SUPRA, Model: TOYOTA SUPRA 2019Pages: 456, PDF Size: 88.65 MB
Page 175 of 456

175
3
Supra Owner's Manual3-1. CONTROLS
CONTROLS
Automatic high-beam ensures that
the high-beam headlights are
switched on when the traffic situa-
tion allows. The high-beam head-
lights are not switched on by the
system in the low speed range.
The system responds to the lights
from oncoming traffic and traffic
driving ahead of you, and to ambi-
ent lighting, for example in built-up
areas.
The high-beam headlights can be
switched on and off manually at any
time.
If the vehicle is equipped with daz-
zle-free Automatic high-beam, the
high-beam headlights are not
switched off for oncoming vehicles
or vehicles driving ahead of you;
instead, the areas of the beam that
would otherwise dazzle the oncom-
ing traffic or traffic driving ahead
are masked off. In this case, the
blue indicator lamp continues to
illuminate.
If the headlights are converted, see
page 176, automatic high-beam
may only function to a limited
extent.
1Press the button on the
light switch element.
The LED in the button illuminates.
2Press the button on the turn
indicator lever.
The system will switch automati-
cally between low-beam and
high-beam headlights.
If a journey is interrupted with auto-
matic high-beam activated: when
the journey is resumed, automatic
high-beam remains activated.
Automatic high-beamis deacti-
vated by switching the high beams
on and off manually, see page 139.
To reactivate Automatic high-beam,
press the button on the turn indica-
tor lever. General
Activating
The indicator lamp in the
instrument cluster is illumi-
nated when the low-beam
headlights are switched
on.
The blue indicator lamp in
the instrument cluster illu-
minates if the high beam
is switched on by the sys-
tem.
Page 176 of 456

176
Supra Owner's Manual3-1. CONTROLS
Press the button on the turn indica-
tor lever.
Automatic high-beam cannot
replace the driver's own judgement
as to when to use the high-beam
headlights. Therefore activate the
dipped headlights manually if the
situation requires it.
In the following situations, the sys-
tem will not operate or its operation
will be impaired and your interven-
tion may be required:
In extremely unfavourable
weather conditions such as fog
or heavy precipitation.
When detecting poorly lit road
users such as pedestrians,
cyclists or horse riders or car-
riages and when trains or ships
are close to the road, or when
animals are crossing the road.
On narrow bends, on steep hill-
tops or in depressions, when
there is crossing traffic or if the
view of oncoming vehicles on a motorway is obstructed.
In poorly lit towns or where there
are highly reflective signs.
When the windscreen in front of
the rear-view mirror is covered
with condensation, dirt, stickers,
labels, etc.
Before the rear fog light is switched
on, the low-beam headlights must
be switched on.
If automatic driving lights control,
see page 171, has been activated,
the low-beam headlights switch on
automatically when the rear fog
light is switched on.
When driving in countries where Deactivating
System limits
Fog lights
Rear fog light
Operating requirements
Switching on/off
Press the button.
The yellow indicator lamp
in the instrument cluster is
illuminated when the rear
fog light is switched on.
Left-hand/right-hand traffic
General
Page 177 of 456

177
3
Supra Owner's Manual3-1. CONTROLS
CONTROLS
vehicles drive on the opposite side
of the road to your vehicle's country
of registration, you will need to pre-
vent your headlights from dazzling
oncoming vehicles.
Via Toyota Supra Command:
1"My Vehicle"
2"Vehicle settings"
3"Exterior lighting"
4"Right-hand/left-hand traffic"
5Select the desired setting.
The automatic high-beam may only
function to a limited extent.
The availability of the adaptive light
functions might be restricted.
The brightness can only be
adjusted when the side lights or the
low-beam headlights are switched
on.Depending on the equipment, the
interior light, the footwell lights and
door entry lighting are controlled
automatically. Switching over the head-
lights
System limits
Instrument lighting
Operating requirements
Adjusting
The brightness can be
set using the knurled
wheel.
Interior light
General
Overview
Buttons in the vehicle
Interior light
Reading lights
Page 269 of 456

269
4
Supra Owner's Manual4-1. DRIVING HINTS
DRIVING HINTS
When visibility is poor due to fog,
even if it is daytime, turn the low
beam headlights on to make your
vehicle more visible to other vehi-
cles, etc. Drive with caution at a low
speed, using the centerline, guard-
rails, taillights of a preceding vehi-
cle, etc., as guide.
When the vehicle is being blown by
crosswinds, drive at a lower speed
and grip the steering wheel
stronger than normal.
The vehicle is especially suscepti-
ble to crosswinds when exiting a
tunnel or underpass, when driving on a bridge or embankment, or
when passing or being passed by a
truck or other large vehicle.
During a rain storm or when the
road surface is wet, the road sur-
face may be slippery and visibil-
ity may be reduced. In this case,
turn the low beam headlights on
to make your vehicle more visi-
ble to other vehicles, etc.
Increase the distance between
your vehicle and preceding vehi-
cles and drive safely at a lower
speed than normal, avoiding
sudden acceleration, braking or
steering operations.
Use the rear defroster and air
conditioning system to prevent
the windows from fogging up.
Hydroplaning is more likely to
occur when driving on ruts or
through large puddles.
On wet or slushy roads, a wedge of
water can form between the tyres
and the road. Driving in inclement weather
When visibility is poor due to fog
During strong wind
When it is raining
Aquaplaning
Page 342 of 456

342
Supra Owner's Manual5-1. MOBILITY
Low-beam headlights switched
off in switch position
■Using the light switch
Make sure that the low-beam head-
lights are not switched on, for
example by the automatic driving
lights control. Therefore, perform
the check when there is sufficient
ambient brightness.
1Light switch, turn from setting
2Press SOS button. The compo-
nents of the system, for example
the microphone, are checked in
a specific sequence.
LED in the SOS button is illumi-
nated briefly, the system is func-
tional.
LED on the SOS button flashes;
the system could not be checked
successfully. Check the opera-
tional readiness once again
under the changed conditions.
If the emergency call does not work
even after a renewed system test,
have the system checked by an any
authorized Toyota retailer or Toyota
authorized repairer, or any reliable
repairer.
■Via Toyota Supra Command
1"My vehicle"
2 Press the button.
3"Emergency call test"
4"Start emergency call test"
5"Start system test"
The self-test of the system is started; follow the instructions on
the Control Display.
If the system has not been suc-
cessfully checked, check the opera-
tional readiness once again under
changed conditions.
If the emergency call does not work
even after a renewed system test,
have the system checked by an any
authorized Toyota retailer or Toyota
authorized repairer, or any reliable
repairer.
The emergency call function may
be impaired.
The LED in the emergency call but-
ton area illuminates for approx. 30
seconds. A vehicle message is
shown.
Have a check performed by any
authorized Toyota retailer or Toyota
authorized repairer, or any reliable
repairer.
The fire extinguisher can be used to
put out vehicle fires.
Malfunction
Fire extinguisher
Principle
Page 449 of 456

449
Supra Owner's ManualAlphabetical Index
Inflation pressure check, see Tyre
Pressure Monitor........................ 290
Inflation pressure, tyres............... 278
Information on no passing .......... 160
Initialising, Tyre Pressure Monitor
TPM.............................................. 293
Instrument cluster ........................ 151
Instrument cluster switch, see Wiper
system ......................................... 140
Instrument lighting ....................... 177
Integrated key ................................. 79
Intended use ..................................... 6
Interior light .................................. 177
Interior light when unlocking ........ 75
Interior light with the vehicle locked
....................................................... 77
Interior movement detector ........... 92
Interval Display, see Service require-
ments........................................... 159
i-Size child restraint systems ...... 113
ISOFIX, child seat mountings...... 112
J
Joystick, Automatic transmission
..................................................... 143
Jump starting, see Starting assis-
tance ............................................ 343
Jump-starting connections ......... 344
Junction warning, see Front-end col-
lision warning with light braking
function ....................................... 193
K
Key switch for front passenger
airbags ........................................ 188
Key, mechanical.............................. 79
Key, see Remote control ................ 74
Keyless Go, see Smart Key System
....................................................... 82
Kick-down, Automatic transmission
..................................................... 143
Knee airbag ................................... 180
L
Labelling of recommended tyres 282
Labelling of run-flat tyres............. 284
Lane boundary, warning .............. 203
Lane Departure Warning .............. 203
Language, setting on the Control
Display........................................... 61
Lashing eyes in the boot.............. 262
Lashing straps, see Lashing eyes in
the boot ....................................... 262
Launch Control ............................. 148
Laying up the vehicle ................... 354
Laying up, vehicle......................... 354
Leather care .................................. 351
Left-hand traffic, light setting ...... 176
Light alloy wheels, care ............... 352
Light in exterior mirror, see Crossing
traffic warning............................. 246
Light in the exterior mirror, see Blind
spot monitor ............................... 207
Light switch ................................... 171
Lighting.......................................... 171
Lights ............................................. 171
LIM button, see Manual Speed Lim-
iter ................................................ 220
List of all messages........................ 64
Loading .......................................... 261
Loading the boot, see Stowing and
securing a transported load ...... 262
Locking settings ............................. 89
Locking with the remote control ... 76
Locking, automatic ......................... 90
Locking, see Opening and closing74
Low-beam headlights ................... 173
Luggage compartment lid, see Boot
lid ................................................... 85
Lumbar support .............................. 98
M
Maintenance .................................. 315
Scheduled maintenance............. 319
Maintenance requirement, see CBS
Condition Based Service ........... 315