audio TOYOTA tC 2013 Accessories, Audio & Navigation (in English)

37
37
Registering Bluetooth Audio
Device
There are two methods for register-
ing Bluetooth audio device to this
system, both of which are explained
below.
If another Bluetooth audio device
has already been connected, you will
need to cancel this connection prior
to beginning the registration process.
You will mainly be working with your
Bluetooth audio device to register it
with the system. For details, see the
user manual for your Bluetooth audio
device.
Sending your pass key for registration
1. Touch [
] d [Bluetooth] d
[Connect Audio Player] d [Add
New]. If a device has already been
connected, a screen will appear
seeking confirmation of whether
this connection is to be canceled
or not. Touch [YES].
2 . U s

ing the Bluetooth audio, search
for the Bluetooth enabled device
and then select this unit ([CAR
MULTIMEDIA]).
3 . Se

nd the Passkey that appears
on the screen from the Bluetooth
audio device to the system.
I
f th e P

asskey has been sent
correctly, Bluetooth audio will
register it to the system and it will
be connected.
•Registering via SSP (Secure Simple
Pairing)
1. To
uch [
] d [Bluetooth] d
[Connect Audio Player] d [Add
New]. If a device has already been
connected, a screen will appear
seeking confirmation of whether
this connection is to be canceled
or not. Touch [YES].
2 . U s

ing the Bluetooth audio, search
for the Bluetooth enabled device
and then select this unit ([CAR
MULTIMEDIA]).
• For some types of devices and
authentication methods, number
authentication or other means of
verification may be required.
• Blu

etooth 2.0 or higher is required.
Connecting a Bluetooth Audio
Device
Once the Bluetooth audio device is
registered to the System, connec-
tion takes place automatically. Up to
five Bluetooth audio devices can be
registered on the system. You can
select the device that you want to
listen to and it will be connected.
Touch [
] d [Bluetooth] d
[Connect Audio Player] to display a
list of devices.
Touch the Bluetooth audio device
that you want to connect.
Selecting Files
Any of the methods used below can
be used to select Bluetooth audio
files.
Selecting the previous/next file
Touch [
] to return to the begin-
ning of the file that is being played
back. Touch [
] again to playback
the previous file.
Touch [
] to playback the next file.
A quick method for selecting the
previous/next file
Touch [
] to change the MULTI
KNOB to Tune/Scroll mode, then
turn MULTI KNOB to the left to
begin playback of the previous file.
Turning MULTI KNOB to the right will
begin playback of the next file.
• If the volume changes when you turn
the MULTI KNOB, touch [] and
then turn the MULTI KNOB back and
forth.
•

38
38
Selecting tracks from the tracklist
Touch [Track List] and then touch on
the file that you want to listen to.
[Tracks] and [Browse] only display
when AVRCP Ver. 1.4 or greater devic-
es are connected.
Selecting files from the folder:
[Browse] d Touch on the folder to
display the files contained inside the
folder.
Touch [
] while the tracklist /playlist
is being displayed to display the pre-
vious page.
Touch [
] while the list is being dis-
played to display the next page.
Returning from the list display to
the file that is being played
Touch [
].
Touch [<] or [>] when the names of all
the songs will not fit on the list display
to display letters in a scrolling format.
Playing Bluetooth Audio Files in
Random Order
Each time you touch [RAND],
Bluetooth audio files are played as
described below.
Normal playback d Files on the album are
played back in random order d All files
are played in random order ( d Normal
playback)
[RAND] is only displayed when
AVRCP Ver. 1.3 or greater devices
are connected.
Repeating Files
Each time you touch [RPT],
Bluetooth audio files are played as
described below.
Normal playback d Playback of files is
repeated d Playback of the files on the
album is repeated* ( d Normal playback)
* If the random function is available,
this is skipped.
[RPT] is only displayed when AVRCP
Ver. 1.3 or greater devices are con-
nected.
Pausing Playback of Files
Touch on [] while the file is
playing. Touch it again and playback
resumes.
•
•
•NOTE
You cannot change to hands-
free phoning by touching
[HandsfreeMode], when the
source is Bluetooth Audio.
Select another source to change
to hands-free phoning(Bluetooth
phone).
Refer to Settings You Can
Establish While Using the Phone
(page 59) for details on hands
free mode.

1
1
Current Pandora account (Free
account and paid accounts
available from Pandora; create a
free account online at http://www.
pandora.com/register or through
the Pandora application for the
iPhone).
iPhone Data Plan.
Note: if the Data Plan for your iPhone
does not provide for unlimited data
usage, additional charges from the cel-
lular phone carrier may
apply for accessing the Pandora
service via its 3G, GSM/EDGE and/or
CDMA networks.
Connection to the Internet via
3G, GSM/EDGE, CDMA or WiFi
network.
Refer to Connecting the iPod
(iPhone) (page 31) for information
regarding how to connect iPhone.
Limitations: Access to the Pandora
® internet
radio will depend on the
availability of a cellular and/or
WiFi network for purposes of
allowing your iPhone to connect
to the Internet.
Ability of this system to access
Pandora
® is subject to change
without notice and could be
•
•
•
•
•
•
af fected by any of the following:
compatibility issues with future
firmware versions of iPhones;
compatibility issues with
future firmware versions of
the Pandora application for the
iPhone; changes to the internet
radio service by Pandora;
discontinuation of the internet
radio service by Pandora.
Certain functionality of Pandora
®
is not available when accessing
the service through this system,
including, but not limited to,
creating new stations, deleting
stations, emailing current
stations, buying songs from
iTunes, viewing additional
text information, logging in to
Pandora
®, and adjusting Cell
Network Audio Quality.
Pandora® internet radio is a internet radio
service not affiliated with Pioneer and
SCION. More information is available
at http://www.pandora.com. Pandora,
the Pandora logo, and the Pandora
trade dress are trademarks or registered
trademarks of Pandora Media, Inc., used
with permission.
•
NOTICE
Park your vehicle in a safe place
before attempting to use the
iPhone and launch the Pandora
®
application installed on the
phone.
You will not be able to control
Pandora by your iPhone while
listening Pandora.

5
5
Requirements for using BeSpoke
with this system:Appl
e iPhone  or later.
Latest version of the BeSpoke
application for the iPhone,
downloaded to your device.
(Search Apple iTunes App Store
for “BeSpoke”).
iPhone Data Plan.
Note: If the Data Plan for your iPhone
does not provide for unlimited data
usage, additional charges from the
cellular phone carrier may apply for
accessing the Zypr service via its 3G,
GSM/EDGE and/or CDMA networks.
Connection to the Internet via
3G, GSM/EDGE, CDMA or Wi-Fi
network.
Refer to Connecting the iPod
(iPhone) (page 31) for information
regarding how to connect an
iPhone.
•
•
•
•
•
NOTICE
Park your vehicle in a safe place
before attempting to use the
iPhone and launch the BeSpoke
application installed on the
phone.
Listening to Internet Radio
Touch [] to listen to and enjoy
Internet radio.
Touch [List] on the displayed screen
to pull up a genre list from which you
can select a favorite station.
The broadcast station can be shared
with friends using Twitter's direct
mail service.
Touch [
] to pull up a station list
of Scion Audio Visual stations from
which you can select a favorite sta-
tion to play to enjoy Scion Audio
Visual programming.
• Checking Twitter/ Facebook
Touch [] to access Twitter's
Timelines and Facebook's
Newsfeeds.
You can also use this function to
check the Tweets and Feeds of reg-
istered friends in the list.
The location of friends who are
disclosing their location will be dis-
played on the map.
Searching for POIs
Touch [] to pull up a genre list that
you can use to search for POIs.
You can display POI search results
on the MAP, and check routes to
each POI.
POI search results can be shared
using Twitter's direct mail service.
Using Voice Routing
Touch [] on the right side of the
screen to pull up a map and direction
list.
Touch a balloon or direction from the
list to start audio guidance.
You can find routes for destinations
easily using the list of recents.
•
•
•

6
6
Using BeSpoke's Voice
Recognition
Touch [] to activate function con-
trol using your voice.
Start talking after the beep stops.
The following voice commands are
available:
Playing Internet radio.
Getting Status Updates ( Twitter/
Facebook)
Sending direct messages
Searching for friends
Searching for POIs
Searching for routes
A Bluetooth connection is needed in
order to use voice control. Refer to
Connecting a Bluetooth Cell Phone
(page 55) for details on Bluetooth
connections.
If a Bluetooth audio device instead
of iPhone is connected, Voice
Recognition may not work properly.
If so, please connect the iPhone
only.
* Touch [] on your iPhone
and then use [Help] to check
the operating procedures for
each icon. (When iPhone is
disconnected.)
•
*
Fo r m
ore details, please visit our
website at
w w w.Scion.com/BeSpoke.
* Fu n

ctions and operation
procedures may dif fer depending
on the version of the application
being used.
NOTE
You cannot change to hands-
free phoning by touching
[HandsfreeMode], when the
source is BeSpoke.
Select another source to change
to hands-free phoning(Bluetooth
phone).
Refer to Settings You Can
Establish While Using the Phone
(page 59) for details on hands
free mode.

8
8
Connecting an
external amplifier
When you connect an external
amplifier to RCA connectors,
please install according to the
amplifier manual.
CAUTION
A standard speaker's
input is rated 17.5 W input
(la r

gest  0 W input).
When an amplifier is
connected to the RCA
output, make sure to
change the speaker that
corresponds to the output.
If you connect to a standard
speaker, this may cause to
catch fire, emit smoke, or
cause damage.
•
NOTICE
The output of an internal
amplifier will not stop even
when an external amplifier
is connected to the RCA
output.
When cutting off the inter-
nal amplifier output cable,
protect the cut surface to
prevent short circuits.
Subwoofer output of this
unit is monaural. The
output level cannot be
adjusted with FADER/
BALANCE on the AUDIO
CONTROL Menu.
Beeps will not be audible
if an external amplifier is
connected to the Front
output.
•
•
•

9
9
Setting Up Audio-Visual
Touch [] to display the Setup
menu. You can then establish
various settings using the Setup
menu.
Setting Up the Display
Touch [Display] on the Setup menu
to display the Display Settings menu.
Next touch on the settings that fol-
low to set them up. After establish-
ing the settings, touch [OK].
Canceling the screen display
Touch [Screen Off].
Touch on either [
], [] or [] or
use the other functions of the steer-
ing switch to display the screen once
again.
NOTICE
Even if the display does not
exhibit properly, you can
still carry out SEEK, TRACK,
startup, playback, pause,
volume adjustment, frequency
adjustment and disc insertion/
extraction operations.
•

50
50
Adjusting the Image Quality of the
Display
After touching [General], touch either
of the settings below to establish
them.
You can set this item, when the cam-
era is connected.
[Contrast]Each time you touch [+], the
display or camera contrast
level increases up to a
maximum level of 5.
Each time you touch
[–], the display or camera
contrast level decreases up
to a minimum level of - 5.
The higher the contrast
level, the greater the
luminance of the image;
the lower the contrast
level, the less the
luminance of the image.
[Brightness]Each time you touch [+],
the display or camera
brightness increases up to
a maximum level of 5.
Each time you touch
[–], the display or camera
brightness decreases up to
a minimum level of - 5.
The greater the brightness
level, the brighter the
image; the lesser the
brightness level, the darker
the image.
Establishing General Settings
Touch on [General] on the Setup
menu to display the General Settings
menu. Next touch on the settings
that follow to set them up.
Changing the display language
After touching [Language], touch the
language that you want to display.
[English] Establishes English as the language to be
displayed.
[Español] Establishes Spanish as the language to be
displayed.
[Français] Establishes French as the language to be
displayed.
Producing/muting the beep sound
After touching [Beep], touch either
[ON] or [OFF].
[ON] This setting establishes the output
of a beep sound.
[OFF] This setting mutes the beep sound.
•Displaying/not displaying each
source’s capture screen on the
Audio Source Selection screen
After touching [Display Album Art],
touch either [ON] or [OFF].
[ON]This setting displays each
source’s capture screen
on the Audio Source
Selection screen.
[OFF]With this setting, there
is no display of each
source’s capture screen
on the Audio Source
Selection screen.
Validating/not validating the
animation ef fects of the Audio
Source Selection screen and back-
ground image
After touching [Animation], touch
either [ON] or [OFF].
[ON]With this setting, the
animation effects of the
Audio Source Selection
screen and background
image are made available.
[OFF]With this setting, the
animation effects of the
Audio Source Selection
screen and background
image are not made
available.

5
5
Bluetooth Audio Player
Touch on [Connect Audio Player] to
display a list of the Bluetooth audio
players that have been registered.
Touch one of the following.
[Add New] Registers the Bluetooth device.
Establishing the detailed
Bluetooth settings
Touch on [Detailed Bluetooth
Settings] on the Bluetooth Settings
menu and then touch on the settings
that follow to set them up.
[Bluetooth
Power][ON] Turns the Bluetooth
power on.
[OFF] Turns the Bluetooth
power off.
[Passcode]This enables you to
change the Passcode for
connecting the
Bluetooth device and the
Passkey. After touching,
enter a four- digit number
and touch [OK].
[Display
Audio
Player
Status][ON]With this setting,
the current status
of the Bluetooth
Audio Player
connection is
displayed.
[OFF]With this setting,
there is no
display of the
current status
of the Bluetooth
Audio Player
connection.
Connection Method
[]
d [Bluetooth] d [Registered
Bluetooth device] d [Details] d [ ] d
Touch [Connection Method] and then touch
one of the following options:
[From Vehicle]: Start the connection
procedures using the system.
[From Audio Player]: Start the
connection procedures using the
Bluetooth audio device.
Connection procedures are normally
carried out automatically, but for
some Bluetooth audio devices, you
will need to change the connection.
For more information, see the
instruction manual for your Bluetooth
audio device.
Setting Up the System
Touch [System] on the Setup menu
to display the SYSTEM Settings
menu and then touch on the settings
that follow to set them up.
Utilizing/Not utilizing the sub-
woofer
Touch [Subwoofer Setting] and then
touch [ON] or [OFF].
[ON] With this setting, the subwoofer is activated.
[OFF] With this setting, the subwoofer is not
activated.
Setting Up the Vehicle Type
Touch [Type of Vehicle Setting] and
then touch one of the following.
[xB] Sets the vehicle type to xB
[xD] Sets the vehicle type to xD
[tC] Sets the vehicle type to tC
[iQ] Sets the vehicle type to iQ
[FR-S] Sets the vehicle type to FR-S
Setting Up Hands-Free Phoning
Touch [Phone] on the Setup menu to
display the menu for phone settings.
For information regarding [Phone],
refer to Setting Up the Phone (page
60).
•
•
•

5
5
[Advanced
Sound
Retriever]The Sound Retriever
function provides a
wide, deep and rich
quality to CD/MP3/
WMA /USB/iPod
sound, which gives
the user a lively
impression.
Establish the Sound
Retriever mode by
touching either [Low
Rate] or [High Rate].
Touch [Off] to
deactivate the Sound
Retriever.NOTICE
The Sound Retriever function
can only be selected when
playing MP3/ WMA from CD
and iPod, USB portable audio
player/USB memory.
The Sound Retriever function
does not support external
compressed audio media.
BASS function and TREBLE
function values can be set for
each of the modes (AM, FM,
CD/MP3/ WMA, iPod/ USB
portable audio player/ USB
memory, XM Satellite Radio).
When you switch modes, the
settings change to the BASS
and TREBLE values set for the
selected mode.
The ASL function is only
ef fective when the vehicle is
moving.
•
•
•
•
Setting Up the Subwoofer
Touch [Sub -W] on the Sound
Settings menu to display the
Subwoofer Settings Menu and then
touch on the settings that follow to
set them up.
( This will only display when the sub -
woofer settings have been activated.
You can set this item, when the
[Subwoofer Setting] is set to [ON].
(page 52)) After the end of setup,
touch [OK] to return to the previous
screen.
[Phase] Establish the
Subwoofer Output
Phase mode by
touching either
[NORMAL] or
[REVERSE].
[Level
Adjustment] Each time you touch
[+], the subwoofer
level steps increase
up to a maximum level
of 6.
Each time you touch
[–], the subwoofer
level steps decrease
down to a minimum
level of -24.
•