bluetooth TOYOTA xD 2013 Accessories, Audio & Navigation (in English)

37
37
Registering Bluetooth Audio
Device
There are two methods for register-
ing Bluetooth audio device to this
system, both of which are explained
below.
If another Bluetooth audio device
has already been connected, you will
need to cancel this connection prior
to beginning the registration process.
You will mainly be working with your
Bluetooth audio device to register it
with the system. For details, see the
user manual for your Bluetooth audio
device.
Sending your pass key for registration
1. Touch [
] d [Bluetooth] d
[Connect Audio Player] d [Add
New]. If a device has already been
connected, a screen will appear
seeking confirmation of whether
this connection is to be canceled
or not. Touch [YES].
2 . U s

ing the Bluetooth audio, search
for the Bluetooth enabled device
and then select this unit ([CAR
MULTIMEDIA]).
3 . Se

nd the Passkey that appears
on the screen from the Bluetooth
audio device to the system.
I
f th e P

asskey has been sent
correctly, Bluetooth audio will
register it to the system and it will
be connected.
•Registering via SSP (Secure Simple
Pairing)
1. To
uch [
] d [Bluetooth] d
[Connect Audio Player] d [Add
New]. If a device has already been
connected, a screen will appear
seeking confirmation of whether
this connection is to be canceled
or not. Touch [YES].
2 . U s

ing the Bluetooth audio, search
for the Bluetooth enabled device
and then select this unit ([CAR
MULTIMEDIA]).
• For some types of devices and
authentication methods, number
authentication or other means of
verification may be required.
• Blu

etooth 2.0 or higher is required.
Connecting a Bluetooth Audio
Device
Once the Bluetooth audio device is
registered to the System, connec-
tion takes place automatically. Up to
five Bluetooth audio devices can be
registered on the system. You can
select the device that you want to
listen to and it will be connected.
Touch [
] d [Bluetooth] d
[Connect Audio Player] to display a
list of devices.
Touch the Bluetooth audio device
that you want to connect.
Selecting Files
Any of the methods used below can
be used to select Bluetooth audio
files.
Selecting the previous/next file
Touch [
] to return to the begin-
ning of the file that is being played
back. Touch [
] again to playback
the previous file.
Touch [
] to playback the next file.
A quick method for selecting the
previous/next file
Touch [
] to change the MULTI
KNOB to Tune/Scroll mode, then
turn MULTI KNOB to the left to
begin playback of the previous file.
Turning MULTI KNOB to the right will
begin playback of the next file.
• If the volume changes when you turn
the MULTI KNOB, touch [] and
then turn the MULTI KNOB back and
forth.
•

38
38
Selecting tracks from the tracklist
Touch [Track List] and then touch on
the file that you want to listen to.
[Tracks] and [Browse] only display
when AVRCP Ver. 1.4 or greater devic-
es are connected.
Selecting files from the folder:
[Browse] d Touch on the folder to
display the files contained inside the
folder.
Touch [
] while the tracklist /playlist
is being displayed to display the pre-
vious page.
Touch [
] while the list is being dis-
played to display the next page.
Returning from the list display to
the file that is being played
Touch [
].
Touch [<] or [>] when the names of all
the songs will not fit on the list display
to display letters in a scrolling format.
Playing Bluetooth Audio Files in
Random Order
Each time you touch [RAND],
Bluetooth audio files are played as
described below.
Normal playback d Files on the album are
played back in random order d All files
are played in random order ( d Normal
playback)
[RAND] is only displayed when
AVRCP Ver. 1.3 or greater devices
are connected.
Repeating Files
Each time you touch [RPT],
Bluetooth audio files are played as
described below.
Normal playback d Playback of files is
repeated d Playback of the files on the
album is repeated* ( d Normal playback)
* If the random function is available,
this is skipped.
[RPT] is only displayed when AVRCP
Ver. 1.3 or greater devices are con-
nected.
Pausing Playback of Files
Touch on [] while the file is
playing. Touch it again and playback
resumes.
•
•
•NOTE
You cannot change to hands-
free phoning by touching
[HandsfreeMode], when the
source is Bluetooth Audio.
Select another source to change
to hands-free phoning(Bluetooth
phone).
Refer to Settings You Can
Establish While Using the Phone
(page 59) for details on hands
free mode.

6
6
Using BeSpoke's Voice
Recognition
Touch [] to activate function con-
trol using your voice.
Start talking after the beep stops.
The following voice commands are
available:
Playing Internet radio.
Getting Status Updates ( Twitter/
Facebook)
Sending direct messages
Searching for friends
Searching for POIs
Searching for routes
A Bluetooth connection is needed in
order to use voice control. Refer to
Connecting a Bluetooth Cell Phone
(page 55) for details on Bluetooth
connections.
If a Bluetooth audio device instead
of iPhone is connected, Voice
Recognition may not work properly.
If so, please connect the iPhone
only.
* Touch [] on your iPhone
and then use [Help] to check
the operating procedures for
each icon. (When iPhone is
disconnected.)
•
*
Fo r m
ore details, please visit our
website at
w w w.Scion.com/BeSpoke.
* Fu n

ctions and operation
procedures may dif fer depending
on the version of the application
being used.
NOTE
You cannot change to hands-
free phoning by touching
[HandsfreeMode], when the
source is BeSpoke.
Select another source to change
to hands-free phoning(Bluetooth
phone).
Refer to Settings You Can
Establish While Using the Phone
(page 59) for details on hands
free mode.

51
51
Formatting/not formatting personal
data recorded on the system
After touching [Delete Personal
Data], touch either [Delete] or [Do
Not Delete].
[Delete]Deletes personal data
that has been recorded in
the system as following:
- Th e s

ource type that
was last played back
- Th e l

ast volume setting
used
- Ea c

h setting value for
the radio source
- Th e p

reset content of
the radio source
- Ea c

h setting value for
the sound settings
- Ea c

h setting value for
the system settings
- Ea c

h setting value
for the contrast &
brightness
- Ea c

h setting value for
the Bluetooth settings
- Th e c

ontacts, speed
dials and call history for
hands-free phoning
[Do Not
Delete]Returns to the General
Settings menu without
deleting personal data
that has been recorded in
the system.
Setting Up Voice Guidance
(For Phone)
Touch on [Voice] on the Setup menu
to display the Voice Settings menu.
Next touch on the settings that fol-
low to establish them.
You can set this item, when the
microphone is connected.
Changing the voice output level
Touch one of the following.
[1] -[7] Establishes the voice output level of Voice
Guidance. The lower
the setting number,
the lower the voice
output level and the
higher the setting
number, the higher the
voice output level
Setting up/not setting up voice
guidance
After touching [Voice Recognition
Prompts], touch either [ON] or [OFF].
[ON] With this setting, Voice Guidance is activated.
[OFF] With this setting, Voice Guidance is not
activated.
Returning the Voice Guidance
v oi c

e output level to Level 
Touch [Default].
• Setting Up Bluetooth
Touch on [Bluetooth] on the Setup
menu to display the Bluetooth
Settings menu. Next touch on the
settings that follow to set them up.
Connecting/disconnecting
registered Bluetooth devices
Touch on [Registered Bluetooth
Device] to display a list of the
Bluetooth devices that have been
registered. Touch one of the follow-
ing.
[Add New] Registers the
Bluetooth device.
[Remove] Excludes the selected Bluetooth device from
the list.
[Detail] With this setting, information regarding
the selected Bluetooth
device is displayed.
•

5
5
Bluetooth Audio Player
Touch on [Connect Audio Player] to
display a list of the Bluetooth audio
players that have been registered.
Touch one of the following.
[Add New] Registers the Bluetooth device.
Establishing the detailed
Bluetooth settings
Touch on [Detailed Bluetooth
Settings] on the Bluetooth Settings
menu and then touch on the settings
that follow to set them up.
[Bluetooth
Power][ON] Turns the Bluetooth
power on.
[OFF] Turns the Bluetooth
power off.
[Passcode]This enables you to
change the Passcode for
connecting the
Bluetooth device and the
Passkey. After touching,
enter a four- digit number
and touch [OK].
[Display
Audio
Player
Status][ON]With this setting,
the current status
of the Bluetooth
Audio Player
connection is
displayed.
[OFF]With this setting,
there is no
display of the
current status
of the Bluetooth
Audio Player
connection.
Connection Method
[]
d [Bluetooth] d [Registered
Bluetooth device] d [Details] d [ ] d
Touch [Connection Method] and then touch
one of the following options:
[From Vehicle]: Start the connection
procedures using the system.
[From Audio Player]: Start the
connection procedures using the
Bluetooth audio device.
Connection procedures are normally
carried out automatically, but for
some Bluetooth audio devices, you
will need to change the connection.
For more information, see the
instruction manual for your Bluetooth
audio device.
Setting Up the System
Touch [System] on the Setup menu
to display the SYSTEM Settings
menu and then touch on the settings
that follow to set them up.
Utilizing/Not utilizing the sub-
woofer
Touch [Subwoofer Setting] and then
touch [ON] or [OFF].
[ON] With this setting, the subwoofer is activated.
[OFF] With this setting, the subwoofer is not
activated.
Setting Up the Vehicle Type
Touch [Type of Vehicle Setting] and
then touch one of the following.
[xB] Sets the vehicle type to xB
[xD] Sets the vehicle type to xD
[tC] Sets the vehicle type to tC
[iQ] Sets the vehicle type to iQ
[FR-S] Sets the vehicle type to FR-S
Setting Up Hands-Free Phoning
Touch [Phone] on the Setup menu to
display the menu for phone settings.
For information regarding [Phone],
refer to Setting Up the Phone (page
60).
•
•
•

55
55
Establishing the SSP (Scion
Sound Processing) Mode
SSP is a modified DSP (Digital Signal
Processing) system that provides a
customized sound for your vehicle.
Touch [SSP] on the Sound Settings
menu to display the SSP Settings
Menu. Touch [SSP Settings] and
touch one of the following to estab -
lish the SSP mode.
[SSP
Natural]Natural and smooth
sound that gives no
listening fatigue but
comfort.
[SSP Hear] A powerful, energetic, live sound.
[SSP Feel] Reproduces the sound on the stage that
musicians hear.
For more details, please visit the
SCION website at
http://www.scion.com/.
•Connecting a
Bluetooth Cell Phone
You can connect a Bluetooth
enabled cell phone to the system
and enjoy hands-free phoning.
You can also use your cell phone
for regular calls with the Bluetooth
connection.
WARNING
Before connecting the cell
phone, always stop your car in a
safe location.
NOTICE
A Bluetooth enabled cell
phone that supports the HFP
profile is required for the
operations explained here.
Make sure and verif y that the
battery is suf ficiently charged
before connecting the cell
phone.
Even when using a cell phone
that has been connected as a
Bluetooth audio player, you will
need to carry out the following
connection procedures for
hands-free phoning.
•
•
•

56
56
For the most part, you will be using
your Bluetooth cell phone to register
the cell phone to the system. For
more information, see the instruction
manual for your cell phone.
1. To

uch [
] d [Bluetooth] d
[Connect Phone] d [Add new].
Phone 01
Phone 02
You can connect up to five
Bluetooth enabled cell phones
and Bluetooth audio players to the
system. If five or more devices
have already been connected, you
will need to cancel some of these
connections. You can accomplish
this by touching on the device(s)
that you want to cancel.
2 . U s

ing your cell phone, search for
a Bluetooth enable device that can
be connected, and then select the
system. 3
. Fo
rward the passcode that
appears on the screen from your
cell phone.
If the p

asscode has been sent
properly, the cell phone will be
connected to the system.
Sending your pass key for registration
1. To

uch [] d [Bluetooth] d
[Connect Phone] d [Add New].
If a device has already been
connected, a screen will appear
seeking confirmation of whether
this connection is to be canceled
or not. Touch [YES].
2 . U s

ing the Bluetooth cell phone,
search for the Bluetooth enabled
device and then select this unit
([CAR MULTIMEDIA]).
3. Se

nd the Passkey that appears on
the screen from the Bluetooth cell
phone to the system.
If th e P

asskey has been sent
correctly, Bluetooth cell phone will
register it to the system and it will
be connected.
Registering via SSP (Secure
Simple Pairing)
1. To

uch [] d [Bluetooth] d
[Connect Phone] d [Add New].
If a device has already been
connected, a screen will appear
seeking confirmation of whether
this connection is to be canceled
or not. Touch [YES]. 2
. U s
ing the Bluetooth cell phone,
search for the Bluetooth enabled
device and then select this unit
([CAR MULTIMEDIA]).
• For some types of devices and
authentication methods, number
authentication or other means of
verification may be required.
• Blu

etooth 2.0 or higher is required.

60
60
Setting Up the Phone
An explanation regarding how to
set up hands-free phoning follows.Establishing the Sound Settings
for Hands-Free Phoning
You can adjust the call and ring tone
volumes, as well as the ring tone
type.
1. To

uch [
] d [Phone] d [Phone
Sound Settings].
2. To

uch any of the setting items
below to establish the sound
settings.
Touch [Default] to return to the fac-
tory settings.
[Call
Volume] Touch [+] to increase
the call volume
incrementally; touch
[–] to decrease the call
volume incrementally.
Touch [OK] after
establishing the Call
Volume settings.
•
[Ring Tone
Volume]Touch [+] to increase
the ring tone volume
incrementally; touch
[–] to decrease the
ring tone volume
incrementally. Touch
[OK] after establishing
the Ring Tone Volume
settings.
[Ring Tone] Touch on one of [Tone 1] - [Tone 3] to select
the ring tone, and then
touch [OK].
3 . To

uch [Save].
Setting Up Automatic Updates
for Contacts
You can set up an option for auto -
matically updating contacts in the
system using the address book of
the cell phone that is connected.
1. To

uch [
] d [Phone] d
[Phonebook] d [Manage
Contacts] d [Transfer Contacts].
2. To

uch [Automatically Download
Contacts], and then touch either
[On] or [Off].
•
[0 - 9] Use this to forward the tone data. Input the
tone data and touch
[Send].
[Mute] Mutes the dial tone.
[Handsfree
Mode] Touch this to change
to hands-free phoning
when directly
manipulating the cell
phone during a call.
NOTE
You cannot change to hands-
free phoning by touching
[HandsfreeMode], when the
source is BeSpoke or Bluetooth
Audio.
Select another source to change
to hands-free phoning(Bluetooth
phone).
Changing to a Phone That Will
be Connected to the System
Up to five Bluetooth devices can be
registered to the system. You can
switch the phone to be used for
hands-free phoning to another phone
that has been registered.
Touch [Connect Phone], and then
touch on the phone that you want to
connect.
•

70
70
BeSpoke Troubleshooting
SymptomAction
BeSpoke does not work.
Is the application installed in the iPhone?
Are you logged in?
Please check the iPhone.
Forgotten the password for
BeSpoke.Reset Password from the iPhone.
You can change the password from the link that will be sent to your registered mail
address.
The map does not display.
Are you in the coverage area?
Is the cable connected correctly?
The map does not scroll.Flick operation is not supported.
Scroll the map by dragging it with your finger.
There is no sound from the
internet radio.Are you in the coverage area?
Switch the source to iPod or Pandora, and then to BeSpoke.
The Voice Recognition does not
work.
Start talking after the beep stops.
Start talking within 3 seconds after the beep stops.
Is the Bluetooth connected?
Are you in the coverage area?
* Touch [] on your iPhone and then use [Help] to check the operating procedures for each icon.
* For more details, please visit our website at w w w.Scion.com/BeSpoke.

73
73
When problems occur with the USB portable audio player/USB memory is connected to this unit, a message
will appear on the display. Refer to the table below to identif y the problem, then take the suggested corrective
action.
No compatible audio files
found.
Please add compatible files to
your USB device.This appears when an MP3/WMA file format is unusual and not supported by this unit
like WAV format recordings.
Please check the MP3/WMA file format.
Connection error.
Please consult your Owner’s
Manual for
instructions on how to connect
the USB device.Communication failure. Or, the overcurrent was detected.
Disconnect the USB portable audio player/USB memory and connect again.
When problems occur with the Bluetooth audio player is connected to this unit, a message will appear on the
display. Refer to the table below to identif y the problem, then take the suggested corrective action.
Audio player battery level is
low.The battery power of the Bluetooth audio player connected with this unit is a little.
Music tracks not supported.
Please check your audio player.This appears when an MP3/WMA file format is unusual and not supported by this unit
like WAV format recordings.
Please check the MP3/WMA file format.