clock VAUXHALL CROSSLAND X 2018.5 User Guide

194Vehicle care
2. Rotate the lower bulb holderanticlockwise to disengage.
Withdraw the bulb holder from the
reflector housing.
3. Press latch and remove the bulb from the bulb holder.
4. Replace the bulb and attach it to the bulb holder.
5. Insert the bulb holder into the reflector housing and rotate
clockwise.
6. Fit the cap and rotate clockwise.
Low beam
1. Rotate the cap (2) anticlockwise and remove it.
2.Lift the retainer, then pull the plug
connector backwards.
3. Fold down the retainer and remove the bulb from the reflectorhousing.

Vehicle care1954. Replace the bulb and push it intothe reflector housing by setting
the lug into position.
5. Fold up the retainer and hold in position.
6. Attach the plug connector to the bulb and fix it with the retainer.
7. Fit the cap and rotate clockwise.
Sidelight/Daytime running light In case of defective LEDs, have them
replaced by a workshop.
LED headlights
Headlights for low and high beam,
sidelights, daytime running lights and turn lights are designed as LEDs and
can not be changed.
Have lights repaired by a workshop in
case of failure.
Fog lights
The bulbs are accessible from the
underside of the vehicle.
1. Turn the bulb holder anti- clockwise and remove it from the
reflector housing.
2. Disengage the bulb socket from the plug connector by pressing
the retaining lug.
3. Remove and replace the bulb socket with bulb and attach the
plug connector.
4. Insert the bulb socket into the reflector housing by turning
clockwise and engage.
Tail lights
Depending on version, tail lights and
brake lights are designed as LEDs. In case of failure, have LEDs replaced
by a workshop.

196Vehicle careLight assembly in the body
Detaching the light assembly
1. Unscrew the two screws that secure the light assembly.
2. Remove the light assembly bypulling it straight back.
3. Remove the three screws thatsecure the bulb carrier.
4. Version without LED
Remove the bulb by pulling and
replace.
Tail light / Brake light ( 1)
Turn light ( 2)
Version with LED
Only turn light bulb can be
replaced.
Remove the bulb socket from the light assembly by turning it
anticlockwise.

198Vehicle care2. Unscrew the plastic securing nutby hand.
3. Carefully withdraw the lightassembly from the recesses and
remove.
4. Press latch to release and remove
bulb carrier.
5. Version without LED
Remove and replace the bulb:
Tail light ( 1)
Rear fog light (right side), reverse
light (left side) ( 2)
Version with LED
Only reverse light bulb can be
replaced.
Remove the bulb socket from the
light assembly by turning it
anticlockwise.
Remove the bulb from the socket by pulling it straight out.

Vehicle care199Replace bulb.
Attaching the light assembly 1. Attach bulb carrier to the light assembly.
2. Attach the light assembly to thetailgate.
3. Secure the light assembly with the
plastic securing nut.
4. Attach the cover to the tailgate.
Side turn lights
To replace bulb, remove lamp
housing:
1. Slide lamp to its left side and remove with its right end.
2. Turn bulb holder anticlockwiseand remove from housing.
3. Pull bulb from bulb holder and replace it.

200Vehicle care4. Insert bulb holder and turnclockwise.
5. Insert left end of the lamp, slide to
the left and insert right end.
Number plate light
The number plate light is designed as
LEDs and can not be changed. In
case of defective LEDs, have them
replaced by a workshop.
Interior lights
Courtesy light, reading lights
Have bulbs replaced by a workshop.
Load compartment light
Have bulbs replaced by a workshop.
Instrument panel illumination
Have bulbs replaced by a workshop.Electrical system
Fuses Data on the replacement fuse must
match the data on the defective fuse.
There are three fuse boxes in the
vehicle:
● engine compartment
● instrument panel
Before replacing a fuse, turn off the
respective switch and the ignition.
A blown fuse can be recognised by its melted wire.Caution
Do not replace the fuse until the
cause of the fault has been
remedied.
Some functions are protected by
several fuses.
Fuses may also be inserted without
existence of a function.
Fuse extractor
A fuse extractor may be located in the
fuse box in the engine compartment.

253Clock............................................. 76
Control indicators.......................... 87
Control of the vehicle .................130
Controls ........................................ 72
Convex shape .............................. 33
Coolant and antifreeze ...............227
Cruise control ...................... 93, 149
Cupholders .................................. 62
Curtain airbag system .................. 54
D Danger, Warnings and Cautions ...4
Daytime running lights ...............110
Declaration of conformity ............242
DEF ............................................ 139
Deflation detection system ...........91
Diesel exhaust fluid ....................139
Diesel fuel system bleeding .......191
Diesel particle filter ...............91, 138
Door open .................................... 93
Doors ............................................ 29
Driver alert .................................. 174
Driver assistance systems ..........149
Driver Information Centre .............93
Driving characteristics and towing tips .............................. 181
Driving hints ................................ 130
E
Electric adjustment ......................33
Electrical system......................... 200Electronic climate control system 121
Electronic driving programmes ..144
Electronic key system ...................22
Electronic Stability Control and Traction Control system ....90, 148
Electronic Stability Control and Traction Control system off .......90
End-of-life vehicle recovery .......186
Engine compartment fuse box ...201
Engine coolant ........................... 189
Engine coolant temperature ........91
Engine coolant temperature gauge ....................................... 85
Engine data ............................... 234
Engine exhaust .......................... 138
Engine identification ...................230
Engine oil ................... 188, 227, 231
Engine oil level monitor ................86
Engine oil pressure ......................91
Entry lighting .............................. 115
Event data recorders ..................248
Exit lighting ................................ 115
Exterior care .............................. 221
Exterior light ................................. 92
Exterior lighting ....................12, 108
Exterior mirrors ............................. 33
F Fault ........................................... 144
First aid ......................................... 68First aid kit ................................... 68
Fixed air vents ........................... 127
Fog light ....................................... 92
Fog lights ................................... 195
Folding mirrors ............................. 34
Forward collision alert................. 154
Front airbag system .....................53
Front fog lights ........................... 112
Front pedestrian protection ........158
Front seats.................................... 42
Fuel............................................. 175
Fuel for diesel engines ..............175
Fuel for liquid gas operation .......176
Fuel for petrol engines ...............175
Fuel gauge ................................... 84
Fuel selector ................................ 84
Fuses ......................................... 200
G Gauges ......................................... 83
Gear shifting ................................. 90
General information ...................180
Glass panel .................................. 39
Glovebox ..................................... 62
H
Halogen headlights ....................192
Hand brake ......................... 146, 147
Hazard warning flashers ............111
Headlight flash ........................... 109
Headlight range adjustment ......110