ECU VAUXHALL MOVANO_B 2016 Owner's Guide
[x] Cancel search | Manufacturer: VAUXHALL, Model Year: 2016, Model line: MOVANO_B, Model: VAUXHALL MOVANO_B 2016Pages: 233
Page 166 of 233

164Vehicle careSidelights
1. Remove protective cover.
2. Detach wiring connector from bulb.
3. Rotate bulb holder anti-clockwise to disengage.
4. Withdraw bulb holder from reflector housing.
5. Detach bulb from bulb holder andrenew the bulb.
6. Insert the bulb holder, engaging the two lugs in the reflectorhousing and rotate clockwise to
secure.
7. Reattach wiring connector to bulb.
8. Replace protective cover.
Adaptive forward lighting
Cornering light
Headlights have separate systems for high beam 1 and low beam 2. The
cornering light 3 is located between
the headlights.
1. Remove protective cover.
2. Detach wiring connector from bulb.
3. Rotate bulb holder anti-clockwise to disengage.
4. Withdraw bulb holder from reflector housing.
Page 167 of 233

Vehicle care165
5. Detach bulb from bulb holder andrenew the bulb.
6. Insert the bulb holder, engaging the two lugs in the reflectorhousing and rotate clockwise to
secure.
7. Reattach wiring connector to bulb.
8. Replace protective cover.
Fog lights
Have the front fog light bulbs replaced
by a workshop.
Front turn signal lights
1. Remove protective cover.
2. Detach wiring connector from bulb.
3. Rotate bulb holder anti-clockwise to disengage.
4. Withdraw bulb holder from reflector housing.
5. Detach bulb from bulb holder andrenew the bulb.
6. Insert the bulb holder, engaging the two lugs in the reflectorhousing and rotate clockwise to
secure.
7. Reattach wiring connector to bulb.
8. Replace protective cover.
Page 169 of 233

Vehicle care167Side turn signal lights1. Push the lamp assembly to the right and pull at the left-hand side
of the lamp assembly to release
from the aperture.
2. Detach wiring connector from lamp assembly.
3. Remove bulb holder from lamp assembly by rotating 90° and
renew bulb.
4. Install bulb holder in lamp assembly.
5. Reattach wiring connector.
6. Install lamp assembly into aperture and push to the left to
secure.
Mirror turn signal lights 1. Move the lower mirror assembly from the front to access the screw.
2. Remove the screw using a torx screwdriver.
3. Remove bulb holder from the rear
of the lower mirror assembly.
4. Renew bulb.
5. Replace bulb holder.
6. Replace the screw.
Centre high-mounted brake
light
1. Remove cover from the inside of the rear door.
2. Unscrew the nut from the locating
pin at the rear of the lamp
assembly.
Page 186 of 233

184Vehicle careWheel changingSome vehicles are equipped with a
tyre repair kit instead of a spare wheel
3 180.
Make the following preparations and
observe the following information:
● Park the vehicle on a level, firm and non-slippery surface. The
front wheels must be in the
straight-ahead position.
● Apply the parking brake and engage first gear or reverse gear
(manual transmission) or N
(manual transmission
automated).
● Switch off the air suspension system 3 122.
● Remove the spare wheel 3 185.
● Never change more than one wheel at a time.
● Use the jack only to change wheels in case of puncture, not
for seasonal winter or summer
tyre change.
● The jack is maintenance-free.● If the ground on which the vehicle
is standing is soft, a solid board
(max. 1 cm thick) should be
placed under the jack.
● No people or animals may be in the vehicle when it is jacked-up.
● Never crawl under a jacked-up vehicle.
● Do not start the engine when the vehicle is raised on the jack.
● Clean wheel bolts/nuts and their threads before mounting thewheel.9 Warning
Do not grease wheel bolt, wheel
nut and wheel nut cone.
1. Remove the wheel cover using the hook supplied. Vehicle tools
3 174.
2. Install the wheel wrench ensuring that it locates securely and loosen
each wheel bolt/nut by half a turn.
3. Vehicles with Front-wheel drive:
Raise vehicle by placing lifting
pad spigot of the jack under the
jacking hole located nearest the
wheel concerned.
Page 187 of 233

Vehicle care185Ensure the jack is positioned
correctly. The jack base must be
on the ground directly below the
jacking hole in a manner that
prevents it from slipping.
Attach wheel wrench onto the jack and raise the vehicle by turning
the wrench until the wheel is clear
of the ground.
Vehicles with Rear-wheel drive:
Pay attention to the operating
instructions supplied with the
hydraulic jack and assemble the
parts required as specified.
Position the adapter at the jacking
hole located nearest the wheel
concerned.
Ensure the jack is positioned
correctly. The jack head must be
level with the jacking hole. Pump
the jack by pressing the wheel
wrench, to position the base plate
correctly.
Raise the vehicle by pressing the wheel wrench until the wheel is
clear of the ground.
4. Unscrew wheel bolts/nuts completely and wipe clean with a
cloth.
Put wheel bolts/nuts somewhere
where the threads will not be
soiled.
5. Change the wheel.
6. Screw in the wheel bolts/nuts.
7. Lower vehicle.
8. Install the wheel wrench ensuring that it locates securely and tighten
each wheel bolt/nut in a crosswise sequence. Tightening torque is:
172 Nm (Front-wheel drive),
235 Nm (Rear-wheel drive with
twin rear wheels), 264 Nm (Rear- wheel drive with single rear
wheels).9. Refit wheel cover.
Notice
If applicable, fit anti-theft bolts
nearest the tyre valve (otherwise it
may not be possible to refit the wheel cover).
10. Stow the replaced wheel 3 185
and the vehicle tools 3 174.
11. Have the new wheel balanced on the vehicle. Check the tyre
pressure of the installed tyre
3 219 and also the wheel bolt/nut
torque as soon as possible.
Have the defective tyre renewed or
repaired.
Spare wheel Some vehicles are equipped with atyre repair kit instead of a spare wheel
3 180.
If mounting a spare wheel which is different from the other wheels, this
wheel might be classified as a
temporary spare wheel and the
corresponding speed limits apply,
even though no label indicates this.
Seek the assistance of a workshop to
check the applicable speed limit.
Page 188 of 233

186Vehicle careCaution
The use of a spare wheel that issmaller than the other wheels or in combination with winter tyres
could affect driveability. Have the defective tyre replaced as soon as
possible.
The spare wheel is held under the
vehicle frame using a winch and
secured by tightening a cable using
the wheel wrench and adapters
(depending on vehicle).
It may be necessary to jack the
vehicle up to gain access to the spare
wheel on a fully loaded vehicle with a flat rear tyre.
To release the spare wheel, loosen
cable by connecting the wheel
wrench and adapters (depending on
vehicle) to the slot position illustrated
and lower the wheel fully by turning
wrench clockwise.
Caution
Only use the wheel wrench and
adapters (depending on vehicle)
to lower the spare wheel.
The use of pneumatic tools is
prohibited. This may result in
damage to the winch cable and
equipment.
Place wheel upright, unclip retainer
from wheel rim and release the wheel
from the cable and connected
retainer by routing these components through the centre of the wheel.
Twin rear wheel vehicles have an
additional mounting plate attached to
the spare wheel. Before using the
wheel, undo the nut and remove the
mounting plate.
Page 189 of 233

Vehicle care187
When reinstalling a spare wheel, first
attach the mounting plate (twin rear
wheel vehicles) and secure with the
nut.
Place wheel upright, then route the
cable and connected retainer from
the front of the wheel (side with tyre
valve) and through the centre of the
wheel. Attach the retainer and clip it
into place, ensuring it is correctly
positioned and that the front of the
wheel (side with tyre valve) will be
facing upwards when reinstalled.
Place wheel below the vehicle frame,
directly beneath the winch
mechanism, then tighten cable using
the wheel wrench and adapters by
connecting to the slot position
illustrated above and turning wrench
anticlockwise until the wheel is
secured in the fully raised position.9 Warning
Ensure the front of the wheel (side
with tyre valve) is facing upwards
when the spare wheel is
reinstalled below the vehicle
frame.
Temporary spare wheel
Caution
The use of a spare wheel that is smaller than the other wheels or in combination with winter tyres
could affect driveability. Have the defective tyre replaced as soon as
possible.
Only mount one temporary spare
wheel. Do not drive faster than
50 mph. Take curves slowly. Do not
use for a long period of time.
If your vehicle gets a flat tyre on the
rear while towing another vehicle,
mount the temporary spare wheel in
the front and the full tyre in the rear.
Tyre chains 3 180.
Summer and winter tyres
If you use winter tyres, the spare
wheel may still be fitted with a
summer tyre.
If you use the spare wheel when it is
fitted with a summer tyre the vehicle's driveability may be affected,
especially on slippery road surfaces.
Directional tyres Fit directional tyres such that they rollin the direction of travel. The rolling
direction is indicated by a symbol
(e.g. an arrow) on the sidewall.
Page 224 of 233

222Customer information● Vehicle reactions in particulardriving situations (e.g. inflation of
an airbag, activation of the
stability regulation system).
● Environmental conditions (e.g. temperature).
These data are exclusively technical and help identifying and correcting
errors as well as optimizing vehicle
functions.
Motion profiles indicating travelled
routes cannot be created with these
data.
If services are used (e.g. repair
works, service processes, warranty cases, quality assurance),
employees of the service network
(manufacturer included) are able to
read out this technical information
from the event and error data storage
modules applying special diagnostic
devices. If required, you will receive
further information at these
workshops. After an error has been
corrected, the data are deleted from
the error storage module or they are
constantly overwritten.When using the vehicle, situations
may occur in which these technical
data related to other information
(accident report, damages on the
vehicle, witness statements etc.) may be associated with a specific person -possibly, with the assistance of an
expert.
Additional functions contractually
agreed upon with the client (e.g.
vehicle location in emergency cases)
allow the transmission of particular
vehicle data from the vehicle.
Radio Frequency
Identification (RFID)
RFID technology is used in some
vehicles for functions such as tyre
pressure monitoring and ignition
system security. It is also used in
connection with conveniences such
as radio remote controls for door
locking/unlocking and starting, and in-
vehicle transmitters for garage door
openers. RFID technology in
Vauxhall vehicles does not use or
record personal information or link
with any other Vauxhall system
containing personal information.
Page 226 of 233

224IndexAAccessories and vehicle modifications .......................... 154
Adaptive forward lighting .....98, 164
AdBlue .......................... 87, 125, 196
Adblue gauge ............................... 79
AdBlue tank ................................ 218
Adjustable air vents ...................113
Airbag and belt tensioners ...........84
Airbag deactivation ................53, 84
Airbag label................................... 49 Airbag system .............................. 49
Air conditioning regular operation ................................ 114
Air conditioning system .............. 104
Air intake .................................... 114
Air suspension ........................... 122
Air suspension system................ 190
Air vents...................................... 113
Antifreeze ................................... 157
Antilock brake system ................ 134
Antilock brake system (ABS) .......86
Anti-theft alarm system ................31
Anti-theft bolts............................. 184
Anti-theft locking system .............. 30
Anti-theft security lock ..................21
Appearance care ........................192
Armrest ........................................ 44
Ashtrays ....................................... 77
Automatic light control .................95Automatic locking ...................21, 25
Autostop ..................................... 118
Auxiliary heater ........................... 109
B Battery discharge protection ......102
Battery, jump starting.................. 188
Belts.............................................. 46 BlueInjection ............................... 125
Bonnet ....................................... 155
Brake assist ............................... 136
Brake fluid .......................... 159, 196
Brakes ............................... 134, 159
Brake system ............................... 85
Breakdown.................................. 190
Bulb replacement ....................... 162
C Capacities .................................. 218
Cargo management system ........67
Car Pass ...................................... 19
Catalytic converter .....................124
Central locking system ................21
Centre high-mounted brake light 167
Changing tyre and wheel size ...179
Charging system .......................... 84
Child locks ................................... 25
Child restraint installation locations ................................... 56
Child restraints.............................. 55
Child restraint systems ................55
Page 230 of 233

228Steering...................................... 116
Steering column controls ..............73
Steering wheel adjustment ......9, 73
Steering wheel controls ...............73
Stop engine .................................. 85
Stop-start system............ 16, 88, 119
Storage ......................................... 64
Storage compartments .................64
Sunglasses storage .....................65
Sun visors .................................... 37
Suspension height ......................122
Suspension seat ........................... 40
Symbols ......................................... 4
T
Tachograph ............................ 89, 94
Tachometer ................................. 78
Tail lights ................................... 166
Technical data ............................ 201
Three-point seat belt .................... 47
Tools .......................................... 174
Top-tether fastening eyes ............63
Tow bar....................................... 150
Towing ........................................ 150
Towing another vehicle .............191
Towing a trailer ........................... 150
Towing equipment .....................151
Towing eye ................................. 190
Towing the vehicle .....................190
Traction Control system ............. 136Trailer coupling ........................... 150
Trailer stability assist .................151
Trailer towing ............................. 150
Transmission ............................... 16
Transmission display ...........81, 130
Tread depth ............................... 179
Trip computer .............................. 92
Triple-Info-Display .......................90
Trip odometer .............................. 78
Turbo engine warm-up ...............118
Turn and lane-change signals .....98
Turn signal ................................... 83
Tyre chains ................................ 180
Tyre changing ............................. 184
Tyre designations ......................176
Tyre pressure ............................ 176
Tyre pressure monitoring system ............................... 87, 177
Tyre pressures ........................... 219
Tyre repair kit ............................. 180
Tyres .......................................... 175
Tyres and wheel size, changing. 179
U Ultrasonic parking assist............. 142
Underseat storage .......................66
Upholstery .................................. 193
Upshift .......................................... 86
Using this manual ..........................3V
Vehicle battery ........................... 159
Vehicle checks............................ 155
Vehicle data ................................ 200
Vehicle data recording and privacy ..................................... 221
Vehicle dimensions .................... 209
Vehicle Identification Number ....198
Vehicle jack ................................ 174
Vehicle messages .......................90
Vehicle security ............................ 30
Vehicle specific data ......................3
Vehicle storage ........................... 154
Vehicle tools ............................... 174
Vehicle unlocking ........................... 6
Vehicle weight ........................... 202
Ventilation ................................... 103
W
Warning chimes ........................... 91
Warning lights ............................... 77
Warning triangle .......................... 69
Washer and wiper systems .........14
Washer fluid ............................... 159
Washing the vehicle ...................192
Wheel changing .........................184
Wheel covers ............................. 180
Wheels and tyres .......................175
Wheel wrench ............................. 174
Wide view mirror .....................34, 37