phone VOLKSWAGEN PASSAT 1997 B3, B4 / 3.G Service Workshop Manual
[x] Cancel search | Manufacturer: VOLKSWAGEN, Model Year: 1997, Model line: PASSAT, Model: VOLKSWAGEN PASSAT 1997 B3, B4 / 3.GPages: 369, PDF Size: 12.33 MB
Page 197 of 369
Downloaded from www.Manualslib.com manuals search engine 46-1
Front brakes,
servicing (Girling
caliper)
Note: After replacing brake pads,
depress brake pedal firmly
several times with vehicle
stationary so that the brake
pads are properly seated in
their normal operating
position. To remove brake fluid from
the reservoir, use a bleeder
bottle which is used only for
brake fluid. Brake fluid is
poisonous and must on not
be siphoned by mouth
using a hose! Wheel bolt tightening
torque: 110 Nm (81 ft lb) Page 1 of 7Front brakes, servicing (Girling caliper)12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.46.1
Page 230 of 369
Downloaded from www.Manualslib.com manuals search engine 46-34
Installing
Note:
Before pressing the piston back, remove some
brake fluid from the reservoir. Use a bleeder
bottle or a plastic bottle which is only used for
brake fluid. Brake fluid is poisonous and must not
be siphoned by mouth through a hose. Note: - Thread in piston by turning knurled wheel of
special tool 3272 clockwise.
- Install brake pads. Install special tool 3272 so that the collar (arrow)
of the tool is seated against the brake caliper. If the piston is difficult to move, use a 13 mm
open end wrench on the flats (arrow A) provided
for this purpose. If the piston is pushed back with a piston resetting
tool or by operating the foot brake, the automatic
adjustment in the brake caliper will be destroyed. Page 8 of 10Rear wheel brakes, servicing (disc brakes)12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.46.5