heater YAMAHA BT1100 2002 Owners Manual

EAU00462PERIODIC MAINTENANCE AND MINOR REPAIR
128
1
7
9
2
3
546
EAUB0012
Replacing the fuses
The fuse box is located under the seat.
(See page 3-13 for seat removal and in-
stallation procedures). If a fuse is blown,
replace it as follows.
1. Turn the key to “
B” (OFF) and turn
off the electrical circuit in question.
2. Remove the blown fuse, and then in-
stall a new fuse of the specified am-
perage.
1. Screw (x 2)
2. Storage compartment
EC000103
Do not use a fuse of a higher amperage
rating than recommended to avoid
causing extensive damage to the elec-
trical system and possibly a fire.
3. Turn the key to “
I” (ON) and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows again,
have a Yamaha dealer check the
electrical system.
CAUTION:
1. Fuse box cover
2. Main fuse
3. Headlight fuse
4. Signaling system fuse
5. Ignition fuse
6. Backup fuse (odometer)
7. Carburetor heater fuse
8. Spare fuse (x 4)
6-28
6
Specified fuses:
Main fuse: 30 A
Backup fuse
(odometer): 5 A
Ignition fuse: 10 A
Headlight fuse: 15 A
Carburetor heater fuse 15 A
Signaling system fuse: 10 A

SPECIFICATIONS
8-4
8
EAU01038
Battery
Model GT14B-4
Voltage, capacity 12 V, 12 Ah
Headlight typeQuartz bulb (halogen)
Bulb voltage, wattage x quantity
Headlight 12 V 60 W / 55 W x 1
Auxiliary light 12 V 5 W x 1
Tail/brake light 12 V 5 W / 21 W
Turn signal indicator light 12 V 10 W x 4
Meter lighting 14 V - 1.2 W x 4
Oil level warning light LED x 1
Neutral indicator light LED x 1
Turn signal light LED x 1
High beam indicator light LED x 1
Fuel level warning light LED x 1
Fuses
Main fuse 30 A
Backup fuse (odometer) 5 A
Ignition fuse 10 A
Headlight fuse 15 A
Carburetor heater fuse 15 A
Signaling system fuse 10 A