oil reset BMW 3 SERIES 2008 E90 Service and warranty information

The engine coolant has a lifetime rating and
does not need to be changed except for sys-
tem repairs.
For your convenience, you may also wish to have
your BMW center perform any necessary opera-
tions to fulfill any state inspection requirements in
your area concurrent with the maintenance ele-
ments specified above during other repairs.
Should you request more frequent mainte-
nance service, the cost of these services will
not be covered by the Maintenance Program.
BMW has applied the most modern technological
advances not only to the design and production of
your vehicle, but also to computing of the opti-
mum maintenance interval for your type of opera-
tions and driving style. Your BMW center has
made a substantial investment in unique BMW
special service tools to enable BMW factory
trained service technicians to perform quality
repairs on your BMW in minimal time. Your service
technician looks forward to serving your every ser-
vice need and to help maximize your satisfaction
with your BMW, its longevity, and resale value.
Quality Certification I
For a detailed list of items inspected, refer to the
Quality Certification I form provided to the
Owner at time of delivery. A copy of the form is
on file at the selling BMW center.
Maintenance Summary
The Condition Based Service (CBS) system will
determine the requirement for performance of
the maintenance services described on this and
the following page. These services may be
required either individually or in conjunction with
other maintenance services.
Standard operations
Maintenance work:
 Brief diagnostic test
 Verify Check Control messages.
 Check indicator and warning lights.
 Reset CBS display.
 Inspect tires, adjust tire pressures and reset
Tire Pressure Monitor.
Engine oil
Maintenance work:
 Change the engine oil and oil filter. We rec-
ommend BMW High Performance 5W-30
Synthetic Oil P/N 07 51 0 017 866.
 After every 3rd engine oil change: Intake air
cleaner: replace air filter element (reduce
replacement interval in dusty operating
conditions).
 Parking brake: Check function and
pre-burnish.
Microfilter (not shown in CBS)
Maintenance work:
 Replace ventilation microfilter.
Front brake
Maintenance work:
 Replace brake pads, clean brake pad contact
points in calipers.
 Brake discs: Check surface and thickness, if
necessary replace at extra charge.*
Rear brake
Maintenance work:
 Replace brake pads, clean brake pad contact
points in calipers.
 Brake discs: Check surface and thickness, if
necessary replace at extra charge.*
 Parking brake: Check condition, brake lining
thickness and function, if necessary replace
at extra charge.*
*Unless covered by Maintenance Program
7

Vehicle Check
Maintenance work:
 Check operation of horn, headlight flasher
and hazard warning flashers.
 Check instrument and control lighting and
heater/air-conditioning blower.
 Check lighting system: turn signals, back-up,
license plate, interior (incl. map, reading
lights), glovebox, flashlight, luggage area
lights.
 Safety belts: Check condition and function.
 Check windshield wiper and washer jet
positions.
 Body: Check for corrosion (except cavities).
 Tires: Check tread depth, wear pattern, outer
condition, inflation pressure. If necessary, cor-
rect pressure.
 Reset Tire Pressure Monitor.
 Battery: Check state of charge (magic eye)
and charge if required.
 Power steering reservoir: Check fluid level.
 Visually inspect all SRS airbag units for torn
covers, obvious damage or attachment of
stickers.
 Rear-view mirrors
 Coolant: Check fluid level and concentration.
 Windshield washer and intensive cleaning
system: Check protection level, fluid level, top
if necessary.
 Brake system connections and lines: Check
for leaks, damage and correct positioning.
 Underbody, incl. all visible parts (i.e. transmis-
sion, rear axle, fuel lines, exhaust system):
Check for damage, leaks and corrosion.
 Steering components: Check for clearance,
leaks, damage and wear.
 Final Inspection: Road test with check of
– Brakes, including burnishing of parking
brake pads
– Steering
– Shock absorbers (visual)
– Transmission
Brake fluid
Maintenance work:
 Replace brake fluid.
Automatic Transmission
Maintenance work:
 Replace ATF at intervals of 100,000 miles.
Emission Control Maintenance
Schedule
The maintenance schedule as shown is required
for the proper functioning of the emission con-
trol systems for optimum vehicle performance
and fuel economy.
Basic Engine
Engine oil As specified by CBS
Engine oil filter As specified by CBS
Fuel System
Air filter As specified by CBS
Ignition System
Spark plugs (328i
versions) 100,000 miles
Spark plugs (335i
versions) 45,000 miles
Emission Control
Components
Oxygen sensor (except
SULEV) 120,000 miles
Oxygen sensor: SULEV
(PZEV) 150,000 miles
Evidence of Maintenance Work
This BMW Service and Warranty Information
Booklet should be presented to your BMW cen-
ter when maintenance is required. Make sure
that confirmation of maintenance work is always
entered in this Service and Warranty Information
Booklet. You may need this for any warranty
claims that become necessary, and later on as
evidence that your car has been given the cor-
rect and regular maintenance that justifies its
resale or trade-in value.
8