hood release CHRYSLER CONCORDE 2004 2.G Owners Manual

TO OPEN AND CLOSE THE HOOD
To open the hood, two latches must be released. First pull
up on the hood release lever located under the instru-
ment panel.
Then lift up on the catch located under the front edge of
the hood, near the center.To prevent possible damage, do not slam the hood to
close it. Use a firm downward push at the center frone
edge of the hood to ensure that both latches engage.
Never drive your vehicle unless the hood is fully closed,
with both latches engaged.
64 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Chassis Lubrication
Front Suspension Ball Joints
Inspect these ball joints whenever your vehicle is ser-
viced. They are permanently lubricated and do not
require periodic lubrication.
Steering Linkage
Inspect tie rod ends whenever the vehicle is serviced.
They are permanently lubricated and do not require
periodic lubrication.
Drive Shaft Universal Joints
Your vehicle has four constant velocity universal joints.
Periodic lubrication of these joints is not required. How-
ever, the joint boots should be inspected for external
leakage or damage when other maintenance is per-
formed.
If leakage or damage is evident, replace the universal
joint boot and grease immediately.
Continued operation could result in failure of the univer-
sal joint due to water and dirt contamination of the
grease. This would require complete replacement of the
joint assembly.
Body Mechanism Lubrication
Body and other operating mechanisms and linkages
should be inspected, cleaned, and lubricated, as required,
to maintain ease of operation and to provide protection
against rust and wear.
Before the application of any lubricant, the parts con-
cerned should be wiped clean to remove dust and grit;
after lubricating, excess oil or grease should be removed.
Hood Latch
When performing other under hood services, the hood
latch release mechanism and safety catch should be
inspected, cleaned, and lubricated.
It is important to maintain proper lubrication to insure
that the hood mechanisms work properly and safely.
Multi-Purpose Lubricant, NLGI Grade 2, should be ap-
plied sparingly to all pivot and sliding contact areas.
MAINTAINING YOUR VEHICLE 207
7

Homelink Transmitter..................76,81
Hood Release.......................... 64
Hook, Coat............................ 55
Hoses............................214,217
Ignition
Key ................................ 12
Lock............................... 13
Illuminated Entry....................... 14
Infant Restraint......................... 42
Instrument Cluster................107,108,109
Instrument Panel and Controls..........105,106
Instrument Panel Cover.................. 223
Instrument Panel Lens Cleaning............ 223
Interior Fuses.......................... 225
Interior Lights.......................65,226
Intermittent Wipers...................... 70
Introduction............................ 4
Jack Operation......................... 178
Jump Starting......................... 182
Key, Sentry............................. 9Key-In Reminder........................ 12
Keyless Entry System..................... 18
Keys.................................. 9
Knee Bolster........................... 33
Lap/Shoulder Belts...................... 28
LATCH
(Lower Anchors and Tether for CHildren)..... 45
Leaks, Fluid............................ 50
Light Bulbs........................226,227
Lights
Airbag.........................37,49,111
Anti-Lock........................... 112
Automatic Off......................65,66
Back-Up............................ 231
Battery Saver.......................65,66
Brake Warning.................... 112,156
Center Mounted Stop.................. 231
Check Engine........................ 111
Courtesy/Reading..................... 66
Cruise...........................73,110
Daytime Running...................... 68
Dimmer Switch, Headlight............... 69
INDEX 267
10

Trunk Release, Emergency................. 26
Trunk Release Remote Control.............. 25
Turn Signals.........................68,110
Underhood Fuses....................... 224
Uniform Tire Quality Grades.............. 259
Universal Joints........................ 207
Universal Transmitter..................76,81
Vacuum/Vapor Harnesses................ 214
Vehicle Identification Number............... 6
Vehicle Loading........................ 171
Vinyl Trim............................ 221Warning Flasher, Hazard................. 176
Warnings and Cautions.................... 6
Warranty Information.................172,254
Washers, Windshield.................... 209
Washing Vehicle........................ 220
Waxing and Polishing................... 220
Wind Buffeting......................... 88
Windows
Power.............................. 25
Windshield Defroster.................... 138
Windshield Washers...................69,209
Windshield Wipers.................67,69,209
Wipers, Intermittent...................... 70
INDEX 273
10