phone FIAT PANDA 2016 319 / 3.G Owners Manual

Pretensioners and airbags are deployed
in different ways on the basis of the
type of collision. Failure to deploy
of one of the devices does not
necessarily indicate a system
malfunction.
WARNING
102)Do not apply stickers or other objects
on the steering wheel, on the dashboard
in the passenger side airbag area, on
the side cover on the roof and on
the seats. Never put objects (e.g. mobile
phones) on the passenger's side
dashboard since they could interfere with
correct inflation of the airbag and also
cause serious injury to the passengers.
103)Always drive keeping your hands on
the steering wheel rim so that the airbag
can inflate freely if necessary. Do not drive
with your body bent forward. Keep your
back straight against the backrest.104)When an active passenger airbag is
fitted, DO NOT install rearward facing child
restraint systems on the front seat.
Deployment of the airbag in an accident
could cause fatal injuries to the child
regardless of the severity of the impact.
Therefore, always deactivate the passenger
side airbag when a rearward facing child
restraint system is installed on the front
passenger seat. The front passenger seat
must also be positioned back as far as
possible in order to prevent the child
restraint system from coming into contact
with the dashboard. Immediately reactivate
the passenger airbag as soon as the child
restraint system has been removed.
105)Do not affix rigid objects to the coat
hooks or support handles.
106)Do not rest the head, arms or elbows
on the door, windows and window bag
area to avoid possible injuries during
inflation.
107)Never lean your head, arms and
elbows out of the window.
108)If the
warning light stays on whilst
driving, a fault may have occurred in the
restraint systems. In this case the airbags
or pretensioners may not be deployed
in an impact or, in a lower number of
cases, they may be deployed accidentally.
Before continuing, contact a Fiat
Dealership immediately to have the system
checked.109)In the event of “yellow”
warning
light failure, the “red”warning light
switches on and, for versions/markets
where provided, the explosive charges of
the passenger airbag and the side bags
are deactivated. When the "red" warning
light is on, before proceeding contact a Fiat
Dealership to have the system immediately
checked (see previous warning).
110)On vehicles with side bags, do not
cover the front seat backrests with extra
covers.
111)Do not travel carrying objects in your
lap, in front of your chest or between
your lips (pipe, pencils, etc.). They could
cause severe injury if the airbag is
deployed.
112)If the vehicle has been stolen or in the
case of attempt to steal it, if it has been
subjected to vandalism or floods, have the
airbag system checked by a Fiat
Dealership.
89

101
IMPORTANT Depending on the country,
there are various types of adapters for
LPG refuelling pumps. Filler adapter,
supplied with the vehicle and located in
a special case, is specifically designed
for the country in which the vehicle is
sold. If you are in a different country,
find out what type of adaptor is used
there.Natural Power versions
47)To access filler B fig. 89, open the flap
and undo cap A turning it
counterclockwise.
The profile of filler B for refilling is the
universal type, compatible with Italian
and NGV1 standards. In some
European countries adapters are
considered ILLEGAL (e.g. in Germany).
WARNING
130)Do not apply any object/cap to the
end of the filler which is not provided
for the vehicle. The use of non-compliant
objects/caps could cause a pressure
increase inside the tank, resulting in
dangerous situations.
88F1D011589F1D0110
131)Do not bring naked flames or lit
cigarettes near to the fuel tank opening: fire
risk. Keep your face away from the fuel
filler to prevent breathing in harmful
vapours.
132)Do not use a mobile phone near the
refuelling pump: risk of fire.
WARNING
46)The vehicle must only be filled with
diesel fuel for motor vehicles, in
compliance with European Standard EN
590. The use of other products or mixtures
may damage the engine beyond repair
and consequently invalidate the warranty,
due to the damage caused. If you
accidentally refuel with another type of fuel,
do not start the engine, and drain the
tank. If the engine has run, even for a very
short time, you will need to have the entire
fuel supply system emptied in addition to
the tank.
47)The other plates (provided with the
vehicle documents) show the date when
the first cylinder inspection/test is due.
Methane refuelling stations are not
authorised to refill the cylinders when the
inspection date has expired.

IN AN EMERGENCY
A punctured tyre or a burnt-out bulb?
At times, a problem may interfere
with our journey.
The pages on emergencies can help
you to deal with critical situations
independently and with calm.
In an emergency we recommend that
you call the freephone number found in
the Warranty Booklet.
It is also possible to call the national or
international universal freephone
number to search for the nearest
Dealership.HAZARD WARNING LIGHTS...........103
REPLACING A BULB ......................10
REPLACING FUSES........................109
CHANGING A WHEEL ....................112
"FIX&GO AUTOMATIC" KIT .............11
JUMP STARTING ............................117
FUEL CUT-OFF SYSTEM ................119
TOWING THE VEHICLE ..................119
102
IN AN EMERGENCY
3
5

❒connect the other end of the cable
used for positive (+) to the positive
terminal (+) of the auxiliary battery;
❒connect one end of the cable used
for negative (–) to the negative terminal
(–) of the auxiliary battery;
❒Connect the other end of the cable
used for negative (–) to an engine earth
(the visible metal part of the vehicle
engine with flat battery) away from the
battery and the fuel injection system;
❒start the vehicle engine with the
auxiliary battery, let it run for a
few minutes at idling. Start the engine
of the vehicle with flat battery.
Cable disconnection.
Once the engine has been started,
remove the cables proceeding as
follows:
❒disconnect the end of the cable used
for negative (–) from the engine earth
of the vehicle with flat battery;
❒disconnect the other end of the cable
used for negative (–) from the negative
terminal (–) of the auxiliary battery;
❒disconnect the end of the cable used
for positive (+) from the positive terminal
(+) of the auxiliary battery;
❒disconnect one end of the cable
used for positive (+) from the positive
terminal (+) of the vehicle with flat
battery;If it is often necessary to perform a
jump starting, have the vehicle battery
and the recharging system checked
by a Fiat Dealership.
IMPORTANT Any accessories (e.g.
mobile phones, etc.) connected to the
vehicle power sockets draw current
even if they are not used. These
devices, if left connected too much time
with engine off, may cause the battery
to drain with following reduction of
its life and/or failure to start the engine.
WARNING
156)This procedure must be performed by
qualified personnel as incorrect actions
may cause high-intensity electrical
discharge. Furthermore, battery fluid is
poisonous and corrosive: avoid contact
with skin and eyes. Keep naked flames and
lighted cigarettes away from the battery
and do not cause sparks.
157)Remove any metal objects (e.g. rings,
watches, bracelets), that might cause an
accidental electrical contact and cause
serious injury.
WARNING
53)Do not connect the cable to the
negative terminal (–) of the flat battery. The
following spark could lead to battery
explosion and cause serious harm. Only
use the specific earth point; do not use any
other exposed metallic part.
54)Never use a fast battery-charger to
start the engine as this could damage the
electronic systems of your vehicle,
particularly the ignition and engine fuel
supply control units.
1
IN AN EMERGENCY
18

WARNING
164)Never smoke when performing
operations in the engine compartment.
Flammable gases and fumes may be
present and risk igniting.
165)Be very careful when working in the
engine compartment when the engine
is hot: you may get burnt.
166)The cooling system is pressurised. If
necessary, only replace the cap with
another original one or the operation of the
system may be adversely affected. Do
not remove the reservoir cap when the
engine is hot: risk of burns.
167)Do not travel with the washer fluid
reservoir empty: the washer operation
is essential for improving visibility. Some
commercial windscreen washer additives
are flammable. The engine compartment
contains hot components which may set it
on fire.
168)Brake fluid is poisonous and highly
corrosive. In the event of accidental
contact, immediately wash the affected
parts with water and mild soap. Then rinse
thoroughly. Call a doctor immediately if
swallowed.
169)The
symbol on the container
indicates a synthetic brake fluid, which is
different from a mineral fluid. Using a
mineral fluid will damage the special rubber
seals of the braking system beyond repair.170)Battery fluid is poisonous and
corrosive. Avoid contact with the skin and
eyes. Keep naked flames and sources
of sparks away from the battery: risk of
explosion and fire.
171)Using the battery with insufficient
fluid irreparably damages the battery and
may cause an explosion.
172)If the vehicle is left for long periods in
very cold environments, remove the battery
and store it in a warm place to prevent
freezing.
173)Always wear the proper protective
eyewear when working on the battery
or near it.
WARNING
55)Be careful not to confuse the various
types of fluids while topping up: they
are not compatible with each other!
Topping up with an unsuitable fluid could
severely damage your vehicle.
56)The oil level should never exceed the
MAX mark.
57)Do not add oil with specifications other
than those of the oil already in the engine.
58)PARAFLU
UPanti-freeze is used in
the engine cooling system. Use the same
fluid as in the cooling system when topping
up. PARAFLU
UPcannot be mixed with
any other type of fluid. If this happens, do
not start the engine and contact a Fiat
Dealership.59)Avoid allowing brake fluid, which is
extremely corrosive, to come into contact
with painted areas. Should it happen, wash
immediately with water.
60)Incorrect assembly of electrical and
electronic accessories may cause severe
damage to your vehicle. After purchasing
your vehicle, if you wish to install any
accessories (anti-theft, phone, etc.),
contact a Fiat Dealership, which
will suggest the most appropriate devices
for your vehicle, and will, most importantly,
advise you if a higher capacity battery
needs to be installed.
WARNING
4)Used engine oil and oil filters contain
substances which are harmful to the
environment. To change the oil and filters,
we advise you to contact a Fiat Dealership.
5)Used transmission fluid contains
substances that are harmful to the
environment. It is advisable to have the oil
changed by a Fiat Dealership where it
will be disposed of respecting the
environment and according to legal
requirements.
6)Batteries contain substances which are
very dangerous for the environment. For
battery replacement, contact a Fiat
Dealership.
136
SERVICING AND MAINTENANCE

Button Short press (less than 1 second)Long press (more than
1 second)
❒Acceptance of incoming call
❒Display of last calls made
❒Passing from one telephone conversation to another in second call mode (call notification)
❒Call selected or composed contact/number-
❒Activation ofBlue&Me™main menu-
❒Rejection of incoming call
❒Ending of call in progress-
❒Activation of voice recognition
❒Interruption of the voice message in order to give a new voice command❒Repetition of the last
voice message given by
the system
/
Pressing the centre of the left wheel:
❒deactivation of voice recognition
❒interruption of voice message
❒interruption of SMS message reading
❒exit fromBlue&Me™Main Menu
❒exit from a submenu and return to previous menu option
❒exit from the current selection without saving
❒deactivate/reactivate the microphone during a phone conversation
❒resetting of call tone volume for incoming call
❒Media Player Pause on/off-
+/-Turning left wheel upwards or downwards:
❒adjust the audio volume forBlue&Me™system functions: hands-free, SMS message
reader, Media player, voice announcements-
/
Turning right wheel upwards or downwards:
❒Scrolling through theBlue&Me™menu
❒Media Player track selection
❒Scrolling through SMS messages in the list-
183

Button Short press (less than 1 second)Long press (more than
1 second)
SRC/OKPressing the centre of the right wheel:
❒Selected menu option confirmation during manual interaction
❒Transfer of phone conversation in progress from hands-free system to mobile phone and
vice versa
❒Select audio sources (Radio, CD, Media Player, AUX)
❒Selection of SMS message displayed-
(*)
❒Selection of previous/next folder/artist/genre/album depending on the mode selected-
(*)
❒Play previous/next track (Media Player mode)-
(*)Radio buttons (for versions/markets, where provided)
❒For both operating modes for the controls on the steering wheel (short or long press), the function is activated when the
button is released.
184
MULTIMEDIA

HANDS-FREE FUNCTION
QUICK GUIDE
To start using the hands-free function
with voice recognition andBluetooth®
technology provided byBlue&Me™:
❒Make sure that the ignition key is
turned toMAR
❒Practise the voice commands
❒Register your mobile phone
❒Make a call.
Preparing your mobile phone
phonebook
Before pairing your mobile phone with
Blue&Me™, you must make sure
you have stored the names you want to
contact in the phonebook on your
mobile phone so that you can call them
using the car's hands-free system.
If your phonebook does not contain any
names, enter new names for the most
frequently used numbers. For further
details, consult your mobile phone
manual.
IMPORTANT
❒Access to the phonebook copied to
Blue&Me™is possible only when
the mobile phone from which it was
copied is connected.❒Entries stored in the SIM card or
mobile phone memory can be
transferred toBlue&Me™with different
procedures, depending on your mobile
phone model.
Getting to know the voice
commands
When talking to the system, you can
always use the voice command "Help",
to obtain detailed instructions on the
voice commands available for each
stage of interaction.
To practise the "Help" command
proceed as follows:
❒Press the
control on the steering
wheel.
❒AfterBlue&Me™has given an
acoustic signal to indicate that voice
recognition is active, say "Help".
Blue&Me™will give the list of voice
commands available.
❒At the end of the help message, say
"Settings" and, at the end of the
message, "Help".Blue&Me™will give
the list of voice commands available
for the Settings menu.
❒You can now give one of the available
commands and proceed with the
dialogue as you wish.
❒If you need further help press
and
say "Help".Pairing your mobile phone
IMPORTANT This operation should be
carried out only with the vehicle
stationary.
To pair your mobile phone, proceed as
follows:
❒Press
and say "Settings" and
then, at the end of the message from
Blue&Me™, say "User pairing".
❒The system will show a code number
(PIN) on the instrument panel display,
which is used for the pairing procedure.
For the two subsequent stages,
consult your mobile phone manual.
❒Look for devices with Bluetooth®
technology on your mobile phone (the
setting on your mobile phone could
be called Search or New Device). Find
“Blue&Me” in this list (the name that
identifies theBlue&Me™system
in your vehicle) and select it.
❒When prompted, enter the PIN code
displayed on the instrument panel
using your mobile phone keypad. If
pairing is successful, the system will
say "Connecting" and at the end the
display will show, as confirmation,
details of the mobile phone paired.
185

It is important to wait for this
confirmation message; if you press the
right
/wheel before it appears,
you risk cancelling the pairing process.
If the registration fails, an error message
will appear; in this case, you will need
to repeat the procedure.
❒After pairing your mobile phone, the
first time you connect,Blue&Me™
will say "Welcome". This message will
no longer be heard at subsequent
pairing or connecting procedures.
❒Blue&Me™asks you if you want to
copy the phonebook of the mobile
phone just paired onto theBlue&Me™
system. You are advised to copy it. To
proceed with copying, say "Ye s"; if you
do not want to copy the phonebook,
say "No".
❒On some mobile phones, the names
in the phonebook are not copied
automatically, but have to be
transferred by using the mobile phone
keypad. IfBlue&Me™asks you, carry
out this procedure by following the
specific instructions on your mobile
phone and press the rightSRC/OK
wheel when you have finished.Making a phone call
Imagine that "John" is one of the
names saved in your phonebook.
To call John, proceed as follows:
❒Press the
control on the steering
wheel and say "Call John".
❒If the system recognises the name
John, the relevant information will
be shown on the display.
If your phonebook has only one number
stored for John, the system will ask
you directly if you want to call him. To
make the call, say "Ye s"; otherwise, say
"No".
If, on the other hand, there are several
phone numbers for John, the system
will ask which one you wish to call
(for example, "Call John work
or home?"). Respond by indicating
which number you want to call (for
example, "Home").If John has several phone numbers but
the type of phone number is missing,
the system will display the selected
contact and a list of related phone
numbers. The hands-free system will
ask if you would like to call the phone
number displayed. If the number
displayed is the one you wish to call,
say "Ye s"; otherwise, say “No". If
the person to contact is the correct
one, but the number is wrong, say
"Forward"or"Back" to see the other
phone numbers for this person.
To call the number displayed, say
"Call". You can also navigate through
this list manually by turning the right
/wheel until you find the desired
number. At this point, press
to make
the call.
❒To end the call, press
.
SMS MESSAGE READER
QUICK GUIDE
(only for phones which support this
function)
If yourBluetooth® phone supports
this function, when a new SMS mes-
sage is receivedBlue&Me™will notify
you through an acoustic signal and ask
you if you want to read it.
❒Say "Ye s" or press the rightSRC/OK
wheel, and the system will read the
last message received.
186
MULTIMEDIA

❒Say "No" or press the right/
wheel and the system will store the
message so you can read it another
time.
MEDIA PLAYER QUICK
GUIDE
Proceed as follows to start playing the
digital audio stored on your USB
device:
❒Copy the tracks to your USB device.
❒For USB devices without a USB
cable, simply connect the device to the
USB port in the vehicle (directly or
with the help of an extension).
❒For USB devices with a cable,
connect one end to your USB device
and the other to the USB port in the
vehicle.
❒Turn the vehicle's ignition key to
MAR.Blue&Me™will automatically
start to play your digital tracks,
selecting them from a library that is
created when you connect the USB
device.
❒The time required byBlue&Me™to
recognise your USB device and start
playback may depend on the type
of device, its capacity and its contents.❒AfterBlue&Me™has created a
library of your digital audio files, you can
select and listen to tracks, albums,
artists and playlists, using manual or
vocal interaction withBlue&Me™.
Creating the library may require a few
minutes if your USB device contains
many files.
❒You can also decide whether to play
audio files automatically when the
USB/iPod device is connected or to
play them only on your command.
LIST OF AVAILABLE
VOICE COMMANDS
The mainBlue&Me™available voice
commands are listed below.
Voice commands always available
❒Help
❒Cancel
❒Repeat
Hands free voice commands
❒Call number
❒Call [Name]”/
❒Phone
❒Last call received
❒Last call made
❒Last callSMS reader voice commands
❒Read last
❒Message reader
Media player voice commands
❒Media player
❒Play
❒Stop
❒Next
❒Previous
❒Shuffle on
❒Shuffle off
❒Loop on
❒Loop off
❒Automatic play on
❒Automatic play off
❒Now playing (track data)
Voice commands for the settings
functions
❒
Settings
❒Multimedia file settings
❒Exit
WARNING
188)Using some of the system functions
whilst driving can distract attention away
from the road, risking an accident or other
serious consequences; they should
therefore be used only when driving
conditions allow it and, if necessary, only
with the vehicle stationary.
187