ESP RENAULT TWINGO 2009 2.G Panelwork Workshop Manual

40A-30
GENERAL INFORMATION
Structural bodywork documentation: Description
40A
II - INFORMATION SEARCH
Questions Answers
Features of specific tools to repair a given vehicle.Refer firstly to section 0 of the Vehicle MR then refer
to the « special tooling catalogue » or the « garage
equipment catalogue » .
Features of specific products to repair a given vehicle. Firstly refer to section 0 of the Vehicle MR then refer
to the « IXELL product catalogue » .
Description and part number of a specific tool to
repair a giv en vehicle.Firstly refer to section 0 of the Vehicle MR.
Using a bodywork tool. Refer to subsection 40A of the Vehicle MR.
Information concerning the replacement parts of a
given vehicle regarding:
-the possibilities of replacement with the position on
vehicle,
-an adaptation before the assembly,
-a cutting place with the special notes on this cut,
-special notes on r ight-left symmetry.
-special features of the version or equipment.Refer to the subsection which corresponds to the part
concerned: 41 to 48 of the Vehicle MR.
Information concerning the spare parts of a given
vehicle, the composition and the specifications of
each par t it contains.Firstly refer to the parts description exploded view in
subsection 40 of the Vehicle MR.
If this is detailed in the document, refer to subsections
41 to 48 of the Vehicle MR which corresponds to the
par t concerned.
If this does not appear in the description, refer to sub-
section 41 to 48 for the part in the next level up.
Information concerning:
-details of panel overlap on a joint,
-a procedure and an operational mode relating to a
new type of assembly in Renault,
-a method for using a tool or a new product which is
unfamiliar in Renault.Refer to the subsection which corresponds to the part
concerned: 41 to 48 of the Vehicle MR then subsec-
tion 40 of Vehicle MR 400.
Towing and raising a vehicle after an accident. Firstly refer to subsection 02A of the Vehicle MR then
the equipment catalogue.
Combination of impacts to repair a given vehicle. Refer to subsection 03B of the Vehicle MR.
Fault finding on an impact for a given vehicle.Firstly refer to subsection 03B of the Vehicle MR or
MR 400.

43A-3
SIDE UPPER STRUCTURE
A-pillar: Description
43A
Section C
2 - Partial front replacementSection D
3 - Complete replacement
120994
WARNING
Respect the position of this cut which has been
determined in accordance with the position of the
inner stiffeners or acoustic inserts, in order to pre-
vent damaging the parts (inner stiffener and/or
acoustic inser t).
120993
120996
WARNING
Respect the position of this cut which has been
determined in accordance with the position of the
inner stiffeners or acoustic inserts, in order to pre-
vent damaging the parts (inner stiffener and/or
acoustic inser t).
120990