service TOYOTA AYGO 2011 Owner's Manual

134GAUGES, METERS AND SERVICE REMINDER INDICATORS
If the light comes on while driving, the
systemdoes not work. However, as con-
ventional braking operates when applied,
there is no problem to continue your driv-
ing.
In the following cases, contact any autho-
rized Toyota dealer or repairer, or another
duly qualified and equipped professional:
DThe warning light does not come on
after the engine switch is turned to the
“ON” position.
DThe warning light remains on after the
engine switch is turned to the “ON”
position.
DThe warning light comes on while driv-
ing.
(m) SRS Warning Light
This light will come on when the engine
switch is turned to the “ON” position.
It goes off after about 6 seconds or
remains on when the airbag manual on−
off switch is in the “OFF” position.
This means the airbag system is operat-
ing properly.
This warning light system monitors the
airbag sensor assembly, side airbag sen-
sors, side and curtain shield airbag sen-
sors, front seat belt pretensioner assem-
blies, inflators, warning light,
interconnecting wiring and power sources.
If either of the following conditions occurs,
this indicates a malfunction somewhere in
the components monitored by the warning
light system. Contact any authorized
Toyota dealer or repairer, or another duly
qualified and equipped professional, as
soon as possible to service the vehicle.
DThe key cylinder cannot be turned.
The airbag manual on−offswitchisinthe
“ON” position:
DWhen the engine switch is turned to
the “ON” position, the light comes on
for more than 6 seconds and then
flashes.
DWhen the engine switch is turned to
the “ON” position, the light either re-
mains off or flashes.
DWhile driving the vehicle, the light
flashes.
The airbag manual on−offswitchisinthe
“OFF” position.
DWhen the engine switch is turned to
the “ON” position, the light comes on
for more than 6 seconds and then goes
off or flashes.
DWhen the engine switch is turned to
the “ON” position, the light remains off
or flashes without illuminating for more
than 6 seconds.
DWhile driving the vehicle, the light goes
off or flashes.
(n) Electric Power Steering System
Warning Light
The light comes on when the engine
switch is turned to the “ON” position. If
the electric power steering system warning
light works properly, the light turns off
after a few seconds. If thesystem has
malfunctions, the light comes on again.
If the following conditions occur, this
indicates a malfunction somewhere in
the parts monitored by the warning
light system. Contact any authorized
Toyota dealer or repairer, or another
duly qualified and equipped profession-
al, as soon as possible to service the
vehicle.
DThe light does not come on when the
engine switch is turned to the “ON”
position or remains on.
DThe light stays on while you are driv-
ing.
The warning light turning on while racing
the engine for a long time may not indi-
cate malfunction. To turn off the light, re-
start the engine and start driving.
AYGO WE 99E37E11 02.18

GAUGES, METERS AND SERVICE REMINDER INDICATORS135
CAUTION
If the electric power steering system
warning light comes on, take your ve-
hicle to any authorized Toyota dealer
or repairer, or another duly qualified
and equipped professional, as soon
as possible. In this case, more effort
is required for the steering wheel to
turn than usual. Drive your vehicle
while firmly gripping the steering
wheel.
(o) Light Reminder Buzzer
This buzzer will sound if the driver ’s door
is opened while the engine switch is
turned to the “LOCK” position with the
headlight switch on. Removing the key will
not stop the buzzer as long as the head-
light switch is on.
(p) Warning function of the Multi−mode
manual transmission (Multi−mode
manual transmission only)
When driving, if any incorrect operation
that may cause damage to this system is
performed or if the gear is not shifted as
desired by the driver, the warning buzzer
will sound and the gear position indicator
will blink to warn the driver in some
cases. For details, see “—Warning
functions” on page 154 in Section 1−7.
When the shift lever is shifted to “R”, the
reverse buzzer sounds once. This is to
indicate the shift lever position, not a
malfunction. For details, see “(d) Backing
up” on page 143 or 150 in Section 1−7.CHECKING SERVICE REMINDER
INDICATORS (except the low fuel level
warning light)
1. Apply the parking brake.
2. Turn the engine switch to the “ON”
position, but do not start the engine.
All the service reminder indicators should
come on. The “ABS”, “VSC”, “STOP”, en-
gine coolant temperature, Multi−mode
manual transmission warning lights and
electric power steering system warning
lights go off after a few seconds. The
SRS warning light goes off after 6 sec-
onds.
If any service reminder indicator or warn-
ing buzzer does not function as described
above, have it checked by any authorized
Toyota dealer or repairer, or another duly
qualified and equipped professional, as
soon as possible.
AYGO WE 99E37E11 02.18

136GAUGES, METERS AND SERVICE REMINDER INDICATORS
AYGO WE 99E37E11 02.18

ENGINE (IGNITION) SWITCH, TRANSMISSION AND PARKING BRAKE141
—Easy (E) mode
MS16006a
When Easy (E) mode is being activated,
the most appropriate gear position is auto-
matically selected upon an operation of
the accelerator pedal and a variation of
the vehicle speed.
(a) Normal driving
1. Start the engine as instructed in “How
to start the engine” on page 210 in
Section 3.
2. With your foot holding down the brake
pedal, shift the shift lever to the “E”
position properly. When the shift lever
is shifted to “E” position, the gear will
beshiftedto1st.
If the gear cannot be engaged to 1st
when the shift lever is shifted from the
“N” to “E” position, the “N” indicator
will blink and a warning buzzer (long
pulse sound) will sound. At this time,
the system will re−try shifting automati-
cally, or the driver can shift the shift
lever to the “N” position once, then
shift to the “E” position again.
DThe system will re−try shifting automat-
ically. This will take some time, noise
may be heard from the gears, and shift
shock may occur. However, they do not
indicate malfunction.
3. Release the parking brake and brake
pedal.
4. Depress the accelerator pedal slowly.In case the transmission cannot be en-
gaged to a certain gear position during
shifting due to mechanical malfunction, the
gear will not be engaged and remains in
neutral. The “N” in the gear position indi-
cator will blink and a warning buzzer (long
pulse sound) will sound until the driver
shifts the shift lever to “N” position.
Unless the system recovers from the
above−mentioned condition (mechanical
malfunction), the gear will still remain in
neutral position even shifting the shift le-
ver to “E” or “M” position after the system
performs a re−try shifting. Contact any
authorized Toyota dealer or repairer, or
another duly qualified and equipped pro-
fessional, as soon as possible to service
the vehicle.
When the gear jumped out of position
while driving, the gear is shifted to proper
gear position.
CAUTION
DDuring driving the vehicle, do not
shift the shift lever to “N”. The en-
gine brake may not work and you
may get involved in an unexpected
accident. If you return the shift le-
ver from “N” to “E” because of an
unintended shifting, the gear posi-
tion will be changed accordingly to
the current vehicle speed.
DDo not apply the parking brake
while driving. Otherwise, it could
cause a skid and you may get in-
volved in an unexpected accident.
DAlways keep your foot on the brake
pedal while stopped with the engine
running. This operation prevents the
vehicle starting by an unintended
activation of the starting assist sys-
tem.
11 02.18
AYGO WE 99E37E

ENGINE (IGNITION) SWITCH, TRANSMISSION AND PARKING BRAKE147
MS16010a
(a) Upshift and downshift
Upshifting
Pull the shift lever to the “+” direction
and release it. Every time the lever is
operated, the transmission is upshifted
1 step in the order of 1st→2nd→
3rd→4th→5th gear.
Downshifting
Push the shift lever to the “−” direction
and release it. Every time the lever is
operated, the transmission is down-
shifted in the order of 5th→4th→
3rd→2nd→1st gear.
DTo shift down smoothly, the engine
runs fast in some cases. This is done
intentionally by the system and is not
a malfunction.
DWhen driving down a hill, downshift
and use the engine brakes appropriate-
ly. If necessary, continuous shifting
down is possible. However, if down-
shifting more than 3 steps continuously,
the gear shifting will take more time.
DWhen the outside air temperature is
extremely low, the gear may not down-
shift from 2nd to 1st until the vehicle
stops.
DWhen the gear is shifting, a noise can
be heard in some case. This is not a
malfunction.
DIn case the transmission cannot be en-
gaged to a certain gear position during
shifting due to mechanical malfunction,
the gear will not be engaged and re-
mains in neutral. The “N” in the gear
position indicator will blink and a warn-
ing buzzer (long pulse sound) will
sound until the driver shifts the shift
lever to “N” position.
Unless the system recovers from the
above−mentioned condition (mechanical
malfunction), the gear will still remain
in neutral position even shifting the
shift lever to “M” or “E” position after
the system performs a re−try shifting.
If such conditions continue, contact any
authorized Toyota dealer or repairer, or
another duly qualified and equipped
professional, as soon as possible to
service the vehicle.
DWhen the gear jumped out of position
while driving, the gear is shifted to
proper gear position.
NOTICE
Manual (M) mode dose not shift up
the gear even if the engine speed
reaches the rev−limit.
11 02.18
AYGO WE 99E37E

AUDIO SYSTEM169
SCAN
There are two scan features—you can ei-
ther scan the tracks on a specific disc or
scan the first tracks of all the discs in the
magazine.
Scanning the tracks on a disc:
Quickly push and release “SCAN”. “SCAN”
will appear on the display and the player
will scan all the tracks on the disc you
are listening to. If you hear a beep, you
held the button too long, and the player
will scan the first tracks of all the discs
in the magazine. To select a track, push
the “SCAN” a second time. If the player
scanned all the tracks on the disc, it will
stop scanning.
Compact disc changer only—
Scanning for the first tracks of all the
discs in the magazine:
Push and hold “SCAN” until you hear a
beep. “D−SCAN” will appear on the dis-
play and the player will perform the first
track of the next disc. To select a disc,
push the “SCAN” a second time. If the
player has scanned all the discs, it will
stop scanning.
ST (Stereo reception) display
Your radio automatically changes to stereo
reception when a stereo broadcast is re-
ceived. “ST” appears on the display. If the
signal becomes weak, the radio reduces
the amount of channel separation to prev-
ent the weak signal from creating noise.
If the signal becomes extremely weak, the
radio switches from stereo to mono recep-
tion.TA (Traffic Announcement)
This button is used for receiving TA sta-
tions all over the band.
EON (Enhanced Other Network) sys-
tem—If the RDS station (with EON data)
you are listening to is not broadcasting a
traffic information program at the TA (Traf-
fic Announcement) mode, the radio will be
switched to the traffic information program
automatically by using the EON AF list.
After the traffic information ends, the radio
will return to the initial program automati-
cally. A beep will sound to tell you when
this feature starts and ends the operation.
When receiving FM:
Push “TA” to switch the radio mode to TP
(Traffic Program). “TP” will appear on the
display.
In the TP mode, the radio will begin seek-
ing a TP station. If the radio seek out a
TP station, the program name will appear
on the display. If the TA station is re-
ceived, the radio will be switched to the
traffic information program automatically.
When the program ends, the initial opera-
tion resumes. When also in AF mode, the
radio will seek a TP station by using the
AF list.
Push “TA” once again to switch the radio
mode to TA. “TA” will appear on the dis-
play and the radio will mute the volume
of FM station.
In the TA mode, the radio will begin seek-
ing a TP station. It sounds only when a
TP station is received. When a TP station
is received, the program service name will
appear on the display. In the AF mode,
the radio will also begin seeking a TP
station by using the AF list.
While the radio is seeking a TP station,
“TP SEEK” appears on the display. If the
radio cannot seek out any TP stations,
“NOTHING” will appear on the display for
2 seconds and the radio will begin seek-
ing a TP station again.
AYGO WE 99E37E11 02.18

AIR CONDITIONING SYSTEM185
The air conditioning filter may clog af-
ter long term use. The filter may need
to be replaced if the air flow of the air
conditioning and heating and defrosting
experiences extreme reductions in oper-
ating efficiency, or if the windows begin
to fog up easily.
To maintain the air conditioning efficiency,
inspect and replace the air conditioning
filter according to the maintenance sched-
ule. (For scheduled maintenance informa-
tion, please refer to the “Toyota Service
Booklet” or “Toyota Warranty Booklet”.)
MS18010a
1. Pull out the air conditioning filter as
shown in the illustration.
2. Inspect the filter on the surface.
If it is dirty, it should be replaced.
INFORMATION
The air filter should be installed prop-
erly in position. The use of air condi-
tioning with the air filter removed
may cause deteriorated dustproof per-
formance and then affect air condi-
tioning performance.
AYGO WE 99E37E11 02.18
—Checking and replacing the
air conditioning filter

INFORMATION BEFORE DRIVING YOUR TOYOTA197
The three−way catalytic converter is an
emission control device installed in the
exhaust system.
The purpose is to reduce pollutants in the
exhaust gas.
CAUTION
DKeep people and combustible mate-
rials away from the exhaust pipe
while the engine is running. The
exhaust gas is very hot.
DDo not drive, idle or park your ve-
hicle over anything that might burn
easily such as grass, leaves, paper
or rags.
NOTICE
A large amount of unburned gases
flowing into the three−way catalytic
converter may cause it to overheat
and create a fire hazard. To prevent
this and other damage, observe the
following precautions:
zUse only unleaded gasoline.
zDo not drive with an extremely low
fuel level; running out of fuel could
cause the engine to misfire, creat-
ing an excessive load on the three−
way catalytic converter.
zDo not allow the engine to run at
idle speed for more than 20 min-
utes.
zAvoid racing the engine.
zDo not push−start or pull−start your
vehicle.
zDo not turn off the engine while the
vehicle is moving.
zKeep your engine in good running
order. Malfunctions in the engine
electrical system, electronic ignition
system/distributor ignition system
or fuel system could cause an ex-
tremely high three−way catalytic
converter temperature.
zIf the engine becomes difficult to
start or stalls frequently, take your
vehicle in for a check−up to any
authorized Toyota dealer or repairer,
or another duly qualified and
equipped professional.
zTo ensure that the three−way
catalytic converter and the entire
emission control system operate
properly, your vehicle must receive
the periodic inspections required by
the Toyota Maintenance Schedule.
For scheduled maintenance
information, refer to the “Toyota
Service Booklet” or “Toyota
Warranty Booklet”.
AYGO WE 99E37E11 02.18
Three−way catalytic converter

202INFORMATION BEFORE DRIVING YOUR TOYOTA
MS21009
“ABS” warning light
Vehicles without vehicle stability control
system—
The light comes on when the engine
switch is turned to the “ON” position. If
the anti−lock brake system works properly,
the light turns off after a few seconds.
Thereafter, if the system malfunctions, the
light comes on again.
When the “ABS” warning light is on (and
the brake system warning light is off), the
anti−lock brake systemdoes not operate,
but the brake system stilloperates con-
ventionally.
When the “ABS” warning light is on (and
the brake system warning light is off), the
anti−lock brake systemdoes not operate
so that the wheels could lock up during
a sudden braking or braking on slippery
road surfaces.
If either of the following conditions oc-
cur, this indicates a malfunction some-
where in the components monitored by
the warning light system. Contact any
authorized Toyota dealer or repairer, or
another duly qualified and equipped
professional, as soon as possible to
service the vehicle.
DThe light does not come on when the
engine switch is turned to the “ON”
position, or remains on.
DThe light comes on while you are driv-
ing.
A warning light turning on briefly during
operation does not indicate a problem.
CAUTION
If the “ABS” warning light remains on
together with the brake system warn-
ing light, immediately stop your ve-
hicle at a safe place and contact any
authorized Toyota dealer or repairer,
or another duly qualified and
equipped professional.
In this case, not only the anti−lock
brake system will fail but also the
vehicle will become extremely unsta-
ble during braking.
“ABS” warning light
Vehicles with vehicle stability control sys-
tem—
The light comes on when the engine
switch is turned to the “ON” position. If
the anti−lock brake system and the brake
assist system work properly, the light
turns off after a few seconds. Thereafter,
if the system malfunctions, the light
comes on again.
When the “ABS” warning light is on (and
the brake system warning light is off), the
anti−lock brake system, the brake assist
system, the traction control system and
the vehicle stability control system do not
operate, but the brakesystem stilloper-
ates conventionally.
When the “ABS” warning light is on (and
the brake system warning light is off), the
anti−lock brake systemdoes not operate
so that the wheels could lock up during a
sudden braking or braking on slippery
road surfaces.
AYGO WE 99E37E11 02.18

INFORMATION BEFORE DRIVING YOUR TOYOTA203
If either of the following conditions oc-
curs, this indicates a malfunction some-
where in the components monitored by
the warning light system. Contact any
authorized Toyota dealer or repairer, or
another duly qualified and equipped
professional, as soon as possible to
service the vehicle.
DThe light does not come on when the
engine switch is turned to the “ON”
position or remains on.
DThe light comes on while you are driv-
ing.
A warning light turning on briefly during
operation does not indicate a problem.
CAUTION
If the “ABS” warning light remains on
together with the brake system warn-
ing light, immediately stop your ve-
hicle at a safe place and contact any
authorized Toyota dealer or repairer,
or another duly qualified and
equipped professional.
In this case, not only the anti−lock
brake system will fail but also the
vehicle will become extremely unsta-
ble during braking.
BRAKE ASSIST SYSTEM
When you slam the brakes on, the
brake assist system judges as an emer-
gency stop and provides more powerful
braking for a driver who cannot hold
down the brake pedal firmly.
When you slam the brakes on, more pow-
erful braking will be applied. At this time,
you may hear a sound in the engine
compartment and feel the vibrations of the
brake pedal. This does not indicate a mal-
function.Vehicles with vehicle stability control sys-
tem—
The brake assist system becomesopera-
tive after the vehicle has accelerated to a
speed in excess of approximately 10 km/h
(6 mph). It stops operating when the ve-
hicle decelerates to a speed below
approximately 5 km/h (3 mph).
For an explanation of thissystem’s warn-
ing light, see “Service reminder indicators
and warning buzzers” on page 127 in Sec-
tion 1−6.
AYGO WE 99E37E11 02.18