width Acura CL 2002 Owner's Manual

µµÎ
Î
Î
Î
T echnical Inf ormation
Specif ications
306
Dimensions
Weights
Air Conditioning Capacities
4.2 US qt (4.0
, 3.5 Imp qt)
192.0 in (4,877 mm)
70.4 in (1,789 mm)
55.5 in (1,409 mm)
106.9 in (2,715 mm)
61.1 in (1,553 mm)
61.0 in (1,549 mm)
HFC-134a (R-134a)
21.2 22.9 oz (600 650 g) ND-OIL8 1.48 US gal (5.6
, 1.23 Imp gal)
1.98 US gal (7.5, 1.65 Imp gal)
4.6 US qt (4.4
, 3.9 Imp qt)
5.3 US qt (5.0
, 4.4 Imp qt)
Length
Width
Height
Wheelbase
Track
Gross vehicle weight rating See the certification label attached
to the driver’s doorjamb.
Refrigerant type
Charge quantity
Lubricant type 3.1 US qt (2.9, 2.6 Imp qt)
7.6 US qt (7.2, 6.3 Imp qt)
Fuel tank
Engine
coolant
Engine oil
Automatic
transmission
fluid
Windshield
washer
reservoir
2.6 US qt (2.5
, 2.2 Imp qt)
4.8 US qt (4.5, 4.0 Imp qt)
Including the coolant in the reserve tank and that remaining in the
engine.
Reserve tank capacity:
0.16 US gal (0.6
, 0.13 Imp gal)
Excluding the oil remaining in the engine.
1:
2: Approx.
Front
Rear Change
Total
Change
Including filter
Without filter
Total
Change
Total
U.S. Cars
Canada Cars
17.17 US gal (65.0, 14.30 Imp gal)1
2

µ
The treadwear grade is a compara-
tive rating based on the wear rate of
the tire when tested under controlled
conditions on a specif ied government
test course. For example, a tire
graded 150 would wear one and one-
half (1 1/2) times as well on the
government course as a tire graded
100. The relative perf ormance of
tires depends upon the actual condi-
tions of their use, however, and may
depart signif icantly f rom the norm
due to variations in driving habits,
service practices and dif f erences in
road characteristics and climate.
The tires on your car meet all U.S.
Federal Saf ety Requirements. All
tires are also graded for treadwear,
traction, and temperature perform-
ance according to Department of
Transportation (DOT) standards.
The f ollowing explains these
gradings.
Quality grades can be f ound where
applicable on the tire sidewall
between the tread shoulder and the
maximum section width. For
example:
The traction grades, f rom highest to
lowest, are AA, A, B, and C. Those
grades represent the tire’s ability to
stop on wet pavement as measured
under controlled conditions on
specif ied government test surf aces
of asphalt and concrete. A tire
marked C may have poor traction
perf ormance.
Warning: The traction grade
assignedtothistireisbasedon
straight-ahead braking traction tests,
and does not include acceleration,
cornering, hydroplaning, or peak
traction characteristics.
All passenger car tires must conf orm
to Federal Saf ety Requirements in
addition to these grades. T readwear
Unif orm T ire Quality Grading T readwear 200
Traction AA
Temperature A Traction AA, A, B, C
DOT T ire Quality Grading (U.S. Cars)
T echnical Inf ormation308