rims ACURA CSX 2006 Service Repair Manual

Î
ÎÎ
Î
Checking and Adjusting the Headliner/Pillar
Trim Overlap
24-187
A
B
EDGE OF HEADLINER
LESS THAN
15 mm (0.6 in.)
MASKING TAPE
To prevent the side curtain airbag from deploying and
damaging the pillar trim, the overlap between the
headliner and pillar trim must be less then 15 mm
(0.6 in.). To check the overlap, do this:
1. Install the headliner (A) and the pillar trims (B).
2. Apply masking tape to the headliner to mark the upper edge of each p illar trim. 3. Remove the pillar trim, and measure the headliner
overlap.
 If the overlap is less than 15 mm (0.6 in.), remove the tape, and install the pillar trim.
 If the overlap is more than 15 mm (0.6 in.), go to step 4.
4. Carefully trim the headliner with a utility knife, reducing the overlap to less than 15 mm (0.6 in.).
5. Remove the tape, and install the pillar trim.
This illustration shows the A-pillar.
This illustration shows the A-pillar. This illustration shows the A-pillar.
This illustration shows the A-pillar.
08/08/21 14:01:54 61SNR030_240_0187
ProCarManuals.com
DYNOMITE -2009-