deactivate passenger airbag Acura MDX 2004 Owner's Manual

The seat belts in all seating positions
except the driver’s have an additional
locking mechanism that must be
activated to secure a child seat (see
page ).
If the shoulder part of the belt is
pulled all the way out, the locking
mechanism will activate. The belt
will retract, but it will not allow the
passenger to move f reely.
To deactivate the locking
mechanism, unlatch the buckle and
let the seat belt f ully retract. To
ref asten the belt, pull it out only as
f ar as needed.For added protection, the f ront seat
belts are equipped with automatic
seat belt tensioners. When activated,
the tensioners immediately tighten
the belts to help hold the driver and
a f ront passenger in place.When the tensioners are activated,
the seat belts will remain tight until
they are unbuckled in the normal
manner. The tensioners are designed to
activate in any collision severe
enough to cause a f ront, side, or side
curtainairbagtoinflate.
However, the tensioners can be
activated during a collision in which
there is no airbag deployment. In
this case, the airbags would not be
needed, but the additional restraint
provided by the tensioners could be
helpf ul.
44
A utomatic Seat Belt T ensioners
Additional Inf ormation About Your Seat Belts
Driver and Passenger Saf ety20

Pushing or
pulling on the back of the seat,
placing heavy items in the back
seat pocket, pushing cargo against
the seat, or hanging heavy items
on the seat back can interf ere with
the proper operation of the
passenger’s advanced front airbag.
Do not remove or modif y a f ront
seat without consulting an Acura
dealer. This could make the driver’s
seat position sensor or the f ront
passenger’s weight sensors
inef f ective. If it is necessary to
remove or modif y a f ront seat to
accommodate a person with
disabilities, f irst contact Acura
Client Services at 800-382-2238.
Together, airbags and
seat belts provide the best
protection.
Tampering could cause
the airbags to deploy, possibly
causing very serious injury.
If water or another liquid
or spilled water soaks into a seat-
back, it can prevent the side airbag
cutof f system f rom working
properly.
This could make the
driver’s seat position sensor and
the f ront passenger’s weight
sensors inef f ective. This could make the front
passenger’s weight sensors
inef f ective.
Improperly
replacing or covering f ront seat-
back covers can prevent your side
airbags f rom inf lating during a
collision.
This could make the driver’s seat
position sensor and the f ront
passenger’s weight sensors
inef f ective.
Do not do anyt hing t hat would
increase or decrease weight on t hef ront passenger’s seat .
Donotattempttodeactivateyour
airbags.
Do not t amper wit h airbagcomponent s or wiring f or anyreason.
Do not expose t he f ront seat -backsto liquid.
Do not place any it ems under t hefront seats. Do not place t he second row f loor
mat under t he f ront passenger’sseat .
Do not cover or replace f ront seat -back covers wit hout consult ing anAcura dealer.
Do not modif y t he f ront seat s.Additional Saf ety Precautions
Additional Inf ormation About Your Airbags
Driver and Passenger Saf ety32